Commercial characteristics
- Sponsor having loaned the product for the magazine: Oxygen
- Price of the tested product: 45 Euros
- Product category according to its selling price: Mid-range (from 36 to 70 euros)
- Atomizer type: Multi-tank dripper
- Number of resistances allowed: 2
- Resistance Type: Classic Reconstructible, Rebuildable Micro Coil, Reconstructible Classic Temperature Controlled, Rebuildable Micro Coil with Temperature Control
- Supported Bit Type: Cotton, Fiber Freaks Density 1, Fiber Freaks Density 2, Fiber Freaks Yarn 2 mms, Fiber Freaks Cotton Blend
- Quantity in milliliters announced by the manufacturer: 1
Reviewer comments on business characteristics
Peace Maker looks like a barrel revolver, rest assured no ball is contained in this atomizer, but it is a dripper made mainly for a large production of steam, however it does not prevent to also reproduce faithfully good flavors.
With two substantial airflows, it also has on its board, two studs with two holes each, Velocity style. It allows beautiful constructions thanks to the air-wires of 2 mm each, single or double coil it will adapt. In addition with the double tank it can contain a small reserve of appreciable liquid for such a product.
Its pin is adjustable so that this atomizer can fit on all your mods.
A material made for daily use as well as for much more extensive use, for cloud shasing in particular.
This dripper is available in two colors black or steel.
Physical characteristics and felt quality
- Width or Diameter of the product in mms: 24
- Length or height of the product in mms as sold, but without its drip-tip if it is present, and regardless of the length of the connection: 25
- Weight in grams of the product as sold, with its drip-tip if it is present: 42
- Material constituting the product: Stainless steel
- Form Factor Type: Kayfun / Russian
- Number of component parts without screws and washers: 4
- Number of threads: 1
- Quality of the threads: Very good
- Number of O-rings, Drip-Tip excluded: 3
- Quality of O-rings present: Sufficient
- O-ring positions: Drip-Tip Connection, Top-Cap - Tank, Bottom-Cap - Tank
- Capacity in milliliters actually usable: 1
- Overall, do you appreciate the quality of manufacture of this product with regard to its price? Yes
Rating of the vapelier as to feelings quality: 4.8 / 5 
Reviewer's comments on physical characteristics and perceived quality
The Peace Maker is made of stainless steel with a matte black finish that does not easily mark fingerprints. Six vertical recesses give this atomizer a barrel look, all around the tank. The pine is adjustable, well insulated, it is also clear enough to not need to adjust.
This atomizer is supplied with a drip-top and in addition, an adapter to place a more personal drip-tip. the two pieces are in Delrin and are fixed correctly on the top-cap which fits together as it should, thanks to the seal which ensures the good maintenance.
At the level of the airflow, on the tank we find two cyclops holes of 10mm on 2mm to ensure a good air circulation. The top-cap associated with the tank makes it possible to close one of the air holes to vape in single coil, the manipulation is easy by rotating the top-cap in the tank.
The tray is functional despite some machining left by the tools, thanks to the two studs provided with two holes each to put the legs of the resistors, the difference of 12mm is consistent between the center of the two holes, compared to a classic dripper, which allows to achieve resistances worked, quite long and wide. In addition, the diameter of the air wires at 2 mm, gives the advantage of using thick wires (multi-strand).
The tray forms a double deep tank that can hold 1ml of liquid for both reserves.
The tank is held on the base thanks to two joints. Although their function is effective, I regret that they are so fine.
Overall it is a dripper of average quality in relation to its price, materials and machining work are good but nothing exceptional.
Functional features
- Connection type: 510
- Adjustable positive stud? Yes, through an adjustment by thread, the assembly will be flush in all cases
- Presence of air flow regulation? Yes, and variable
- Diameter in mms maximum of the air regulation possible: 10
- Minimum diameter in mms of the air regulation possible: 0.5
- Air regulation positioning: Lateral positioning and benefiting resistors
- Atomization chamber type: Bell type
- Heat dissipation of the product: Excellent
Reviewer's comments on functional features
The main function of this atomizer is its ability to produce a large amount of steam.
Thanks to the large holes on the studs, it is possible to use large diameter wires to build double (or quadruple for the most dexterous) resistances. The spacing of the studs gives access to perfectly centered assemblies, without the need to rework the legs of your resistors.
This atomizer supports large powers well beyond 60 watts with these two large airflows located at the tank, on each side. They are adjustable and the handling to adjust the air inlets is convenient.
The association between the tray, airflow and room in the room, favors sub-hom assemblies for power vaping while keeping a reasonable heating of the atomizer that dissipates the heat. However, single coil assemblies are also possible, obstructing the same side of the air hole, unused by the resistor.
On the tray, we have a substantial double tank since it is almost 5mm deep for a 20mm diameter tray which can receive a little more than 1ml of reserve liquid.
At the level of the 510 connection, the pin is adjustable by a screw which also ensures a good contact.
Drip-Tip Features
- Type of drip-tip attachment: Owner but passage to 510 through a supplied adapter
- Presence of a Drip-Tip? Yes, the vaper can immediately use the product
- Length and type of drip-tip present: Short
- Quality of the drip-tip present: Very good
Reviewer's comments on the Drip-Tip
Squid Industries provides you with a straight drip-top and an adapter to change to a 510 connection drip-tip. The drip-top will be more suitable for the double coil while the adapter allows you to modify the inlet diameter, for a more moderate suction with a simple mounted resistance. This offers a new appearance to this Peace Maker, thanks to a drip-tip chosen by you.
Both are in Delrin and dissipate the heat correctly, the material of the drip-top is comfortable in the mouth.
They fit perfectly on the top-cap with excellent support and the look of the drip-tip gives a nice finish to this atomizer.
Evaluation of the packaging
- Presence of a box accompanying the product: Yes
- Would you say that the packaging is up to the price of the product? Yes
- Presence of a user manual? No
- Is the manual understandable for a non-English speaker? No
- Does the manual explain ALL features? No
Vapelier's note on packaging: 2 / 5 
Reviewer's comments on conditioning
In the packaging we immediately notice the absence of instructions, which is a shame.
The square cardboard box contains, lying in a black foam, the atomizer is all its accessories, properly wedged for good protection. You have :
- An Adapter for Drip-Tip 510
- An Allen key
- 4 replacement BTR screws
- 4 replacement silicone gaskets
Appreciations in use
- Transport facilities with the mod of the test configuration: Ok for a side pocket of Jean (no discomfort)
- Disassembly and cleaning facilities: Easy, even standing in the street, with a simple tissue paper
- Filling facilities: Super simple, even blind in the dark!
- Easy to change resistors: Easy but requires a workspace to lose nothing
- Is it possible to use this product throughout the day with several vials of EJuice? Yes perfectly
- Was there leak after one day of use? No
- In the event of leaks during the tests, descriptions of the situations in which they occur:
Vapelier's note on ease of use: 4.4 / 5 
Reviewer's comments on the use of the product
In use, this dripper is really pleasant. For those looking for originality in their assemblies, they will be able to give it to their heart.
The spacing and the height of the studs offer the possibility of placing the resistors straight and high enough without the need to twist the legs, they will be correctly centered.
For tightening the BTR type grub screws, do not worry, they do not break the resistive, however if you only use one side for your assembly, you will have to remember to screw the one that is not used to avoid a short circuit with the top-cap.
The size of the tank associated with the large airflows, for the cloud in double coil, not only provides a large amount of vapor, but also very present flavors. They are not exceptional, but suitably restored. When used in a single coil, the flavors are correct but too dissipated in a space that cannot be reduced and it is felt a little.
Recommendations for use
- With which type of mod is it advisable to use this product? Electronics AND Mechanics
- With which mod model is it advisable to use this product? all mods with a width of 24mm mini
- With which type of EJuice is it advisable to use this product? All liquids without problem
- Description of the test configuration used: on electro box in double coil at 71W
- Description of the ideal configuration with this product: There are none in particular
was the product liked by the reviewer: Yes
Overall average of the Vapelier for this product: 4.7 / 5 
Link to a video review or blog maintained by the reviewer author of the review
The mood ticket of the reviewer
Although a simple assembly can be achieved, the Peace Maker is not too suitable for this type of vape, under penalty of obtaining flavors a little tight at low power and especially too diluted in the evaporation chamber. On the other hand, it is quite capable of associating large achievements with a correct restitution of flavors for very high powers, performances not always possible to obtain with more dedicated flavor drippers.
The position of the studs is ideal for varied and original montages that will fill the followers of the cloud chasing.
Squid Industries offers us a very air atomizer, in a simple but unusual look in the shape of revolver barrel. Not enough to kill, but the possibility of dissipating hot weather, for a reasonable price / quality ratio.
Sylvie.I
(c) Copyright Le Vapelier SAS 2014 - Only full reproduction of this article is authorized - Any modification of any kind is totally prohibited and infringes the rights of this copyright.
