Commercial characteristics
- Sponsor having loaned the product for the magazine: Vapoclope
- Price of the tested product: 31.90 Euros
- Product category according to its selling price: Entry level (from 1 to 35 euros)
- Atomizer Type: Single Bowl Dripper
- Number of authorized resistances: 4
- Resistance Type: Classic Reconstructible, Rebuildable Micro Coil, Reconstructible Classic Temperature Controlled, Rebuildable Micro Coil with Temperature Control
- Supported Bit Type: Cotton, Fiber Freaks Density 1, Fiber Freaks Density 2, Fiber Freaks Yarn 2 mms, Fiber Freaks Cotton Blend
- Quantity in milliliters announced by the manufacturer: 0.5
Reviewer comments on business characteristics
Another RDA (Rebuildable Dry Atomizer) and yet another originality! Definitely these atos have not finished evolving, let's hope it will come out one day, with all the cool options that have appeared so far, but on as many different atos….
At Blitz Ets we do in the design seen and reviewed and in the evil decoration, it is a choice that should not be discussed but, what about the frightened of the genre? should they plan to repaint their ato or will they have to do without? Personally, I will do without it and not only for this graphic detail.
Yet I must admit that it is not expensive, it is rather pleasant to ride and that it offers a wide range of ways to vaper, thanks to its AFC (Air Flow Control), its place of work on the tray, and its consequent resistive wire lights. We will see below that it also presents some failures which were right of my will to obtain it for me.
Physical characteristics and felt quality
- Width or Diameter of the product in mms: 22
- Length or height of the product in mms as it is sold, but without its drip tip if it is present, and regardless of the length of the connection: 37
- Weight in grams of the product as sold, with its drip tip if it is present: 35
- Material composing the product: Stainless steel, Copper, Delrin
- Form Factor type: Cylindrical, grooved top cap, Ø 12mm drip top
- Number of component parts without screws and washers: 4
- Number of threads: 1
- Quality of the threads: Good
- Number of O-rings, Dript-Tip excluded: 2
- Quality of O-rings present: Sufficient
- O-ring positions: Drip-Top Connection, Top Cap - Top Cap, Body - Body Bottom Cap
- Capacity in milliliters actually usable: 0.5
- Overall, do you appreciate the quality of manufacture of this product with regard to its price? Yes
Rating of the vapelier as to feelings quality: 3.9 / 5 
Reviewer's comments on physical characteristics and perceived quality
First you will need to clean it, even before any other manipulation, it is in your interest. This will give you the opportunity to disassemble it entirely, and to note the numerous traces of machining left in the tank of the plate.
Stainless steel constitutes the major part of this atomizer, the top cap is grooved in order to present cooling fins. The drip top (in Delrin) fits together by friction of an O-ring quite effectively. The platter has an 510 connection and an adjustable positive copper pin, a material that provides good connectivity but that you will need to periodically deoxidize. Another peculiarity of this plate, it does not have the usual fixing pads for the legs of the resistive wires, these are arranged in a cross from the bottom of the mini tank, with a double part insulated by a Peek "bowl". Access to the clamps is on the edge of the bottom cap, we operate on grub screws, hollow hexagon.
The AFC allows 1 to 4 coils mounting and has settings on all possible vent surfaces, some of which are simultaneous, we will come back to this.
Overall the components are well assembled, the 510 screw pitch does not float once tight, the joints are few but do their job of fixing and sealing.
For the asking price, it is perfectly correct, without more.
Functional features
- Connection type: 510
- Adjustable positive stud? Yes, through an adjustment by thread, the assembly will be flush in all cases
- Presence of air flow regulation? Yes, and variable
- Diameter in mms maximum of the air regulation possible: 14 x Ø 2mm
- Minimum diameter in mms of the air regulation possible: 0.1 or totally closed.
- Positioning of the air regulation: Lateral positioning and benefiting the resistances
- Spray chamber type: Conventional / Wide
- Heat dissipation of the product: Excellent
Reviewer's comments on functional features
A rather large atomization chamber depending on whether you will mount your resistors more or less close to the plate, and you have the choice. For a minimum distance of 2mm, your legs will have to protrude vertically 6,5mm from the base of the coils, but you can opt for a larger gap up to 4, or even 5mm and lengthen the legs accordingly.
The 14 air intake vents divided into 2 times seven, (flower-shaped), facing the resistors, will be adjustable by rotating the top cap, holding the body so that it remains in position, nothing is in fact intended to prevent the air flows from being far from the resistors during adjustment. Maximum useful diameter in double / quad coil: 28mm, for 14 in single coil. The arrangement of the holes as well as that of the adjustment, will make it necessary to simultaneously close / open 4 of them in 2 separate passages, the fineness of said adjustment is somewhat reduced, due to this established design.
The tray has 2 rows of 2 resistive fixation lights, one of them is insulated and corresponds to the positive, the other is in the mass of the tank. The lights are 2,3mm in diameter which suggests beefy fixtures. Tightening is carried out by means of the allen wrench provided, laterally to the assembly and allows an easy adjustment of position, as well as a tightening without obstacle, you will just have to prepare your coils before the assembly because any cut of overtaking of wire is excluded .
The tank is minimal: 2mm deep, its reserve of juice is therefore just as much, your cotton capillaries will take over this glaring lack of reserve, especially if you are considering a low assembly and a power vaping type vape. The available reserve juice surface allows just 0,5ml at this depth.
The top cap is designed to dissipate heat, it has fins in contact with the ambient air, supposed to act as a cooling radiator, and this was the case for my assembly at 0,2ohm (stainless steel thickness: 0,6mm ) and 80W, the heating was moderate.
Drip-Tip Features
- Type of attachment of the drip-tip: Owner only
- Presence of a Drip-Tip? Yes, the vaper can immediately use the product
- Length and type of drip-tip present: Short
- Quality of the present drip-tip: Good
Reviewer's comments on the Drip-Tip
In fact drip tip we have a proprietary drip top, connected (nested) on the top cap. Its interior opening is 12mm, it is dotted with 22 holes allowing a very good aerial suction and the frame of Delrin that receives them, effectively prevents the hot splashes to reach your lips. Conical in shape (nuclear plant cooler), it is pleasant in the mouth and does not heat up.
Do not try to adjust the flow of air by this drip top, you must operate by the finned ring, holding the body of the ato.
Evaluation of the packaging
- Presence of a box accompanying the product: Yes
- Would you say that the packaging is up to the price of the product? Can do better
- Presence of a user manual? No
- Is the manual understandable for a non-English speaker? No
- Does the manual explain ALL features? No
Vapelier's note on packaging: 1.5 / 5 
Reviewer's comments on conditioning
There, it will spoil…. The rating also suffers seriously. If the PLEXIGLAS® box is quite appropriate, with its magnetic lid and its semi-rigid foam inside, this is not the case for what is most lacking in this packaging: the instructions.
This small detail will prove to be a big obstacle to import in a few weeks now, because it is obvious that the administrative authorities will use all the cables at their disposal, to hinder the vape phenomenon, as ordered by them tobacco companies, which act as legislators in the field of public health, everyone will soon be able to see it.
The European regulations are thus made, they provide for any object in contact with an electrical source, a user manual, it is a measure of the most beneficial and useful. A failure to provide an explanatory notice may therefore be the subject of a marketing withdrawal order for the product concerned, bye bye Hannya.
Our package without notice includes, besides the atomizer, a bag containing two O-rings, and two spare screws, as well as an Allen key for your assemblies.
Appreciations in use
- Transport facilities with mod of test configuration: Ok for an inside jacket pocket (no deformations)
- Disassembly and cleaning facilities: Easy but requires a workspace
- Filling facilities: Easy, even standing in the street
- Easy to change resistors: Easy but requires a workspace to lose nothing
- Is it possible to use this product throughout the day with several vials of EJuice? It will take a little juggling, but it is doable
- Was there leak after one day of use? No
- In the event of leaks during the tests, descriptions of the situations in which they occurred:
Vapelier's note on ease of use: 3.5 / 5 
Reviewer's comments on the use of the product
To fill your ato, you will remove the top cap, this will allow you to position the air holes correctly and you have access to the cotton while maintaining a sealed compartment up to the vents: the body of the ato.
Little reserve we have seen, it is all the more regrettable that this steam engine is greedy with low mounts. Your cotton will serve as a reservoir, to perhaps allow you a capacity of one ml.
Of course this Hannya remains a good dripper, because of his ability to vape cloud chaser, and that holds the road question restitution of flavors, thanks to the air flow settings. No noticeable leaks, if you are not mistaken in the filling, but it will be necessary, to full, to avoid him the leaning stations prolonged, it is a dripper all that is more classic.
Do not over-tighten mountings either, to preserve 6 fingerprints on screws, you should also make a habit of not loosening them more than necessary, so you do not lose them too frequently.
Nothing special so for this atomizer, it is worth its price, its way of being mounted does not justify that we are ecstatic, and for the rest, you found that it also has disadvantages, say that it is nice and sold at its fair price (the original of course).
Recommendations for use
- With which type of mod is it advisable to use this product? Electronics AND Mechanics
- With which mod model is it advisable to use this product? Open bar, with an 510 connection, a diameter of 22mm and good batteries
- With which type of EJuice is it advisable to use this product? All liquids without problem
- Description of the test configuration used: Hannya 0,20 ohm, Japanese cotton, mecha (Nemesis) battery 35A - Lavabox 80W
- Description of the ideal configuration with this product: In sub ohm on mechanic or electro, with good batteries
was the product liked by the reviewer: Yes
Overall average of the Vapelier for this product: 4.1 / 5 
Link to a video review or blog maintained by the reviewer author of the review
The mood ticket of the reviewer
What's more, there are adaptable parts that you can pick apart, such as a Pyrex body, an 510 adapter, but that's in addition to the original price. I will conclude this column by thanking you for your attentive reading.
I want to join those of you who already have it, to share their experience here or to offer a flash test. Your expertise over time is always a plus for our community.
Good vape
See you soon
(c) Copyright Le Vapelier SAS 2014 - Only full reproduction of this article is authorized - Any modification of any kind is totally prohibited and infringes the rights of this copyright.
