Commercial characteristics
- Sponsor having loaned the product for the magazine: Evaps
- Price of the tested product: 29.9 Euros
- Product category according to its selling price: Entry level (from 1 to 35 euros)
- Atomizer Type: Single Bowl Dripper
- Number of resistances allowed: 2
- Resistance Type: Classic Reconstructible, Rebuildable Micro Coil, Reconstructible Classic Temperature Controlled, Rebuildable Micro Coil with Temperature Control
- Supported Bit Type: Cotton, Fiber Freaks Density 1, Fiber Freaks Density 2, Fiber Freaks Yarn 2 mms, Fiber Freaks Cotton Blend
- Quantity in milliliters announced by the manufacturer: 1
Reviewer comments on business characteristics
The Monkey King is a small, compact and aesthetically successful dripper that not only makes your assemblies visible but above all highlights your wicks to see when they start to dry up, since the top of the tank is made of pyrex.
The two pads of this dripper allow mounting up to two resistors while leaving in the chamber, a large space under the resistance. This associated with the airholes which are particularly well placed, this dripper has an unequaled rendering of flavors while allowing a high power vape.
Physical characteristics and felt quality
- Width or Diameter of the product in mms: 22
- Length or height of the product in mms as it is sold, but without its drip tip if it is present, and regardless of the length of the connection: 23.5
- Weight in grams of the product as sold, with its drip tip if it is present: 65
- Material composing the product: Stainless steel, Gold, Pyrex
- Form Factor Type: Kayfun / Russian
- Number of component parts without screws and washers: 2
- Number of threads: 1
- Quality of the threads: Very good
- Number of O-rings, Dript-Tip excluded: 1
- Quality of O-rings present: Good
- O-Ring Positions: Bottom Cap - Tank
- Capacity in milliliters actually usable: 1
- Overall, do you appreciate the quality of manufacture of this product with regard to its price? Yes
Rating of the vapelier as to feelings quality: 4.9 / 5 
Reviewer's comments on physical characteristics and perceived quality
Relatively compact, this dripper consists of only two parts. On the one hand, the base composed of the tray, notches for the airflow and the studs and on the other the tank in the form of a bell in two inseparable parts, on one of which we distinguish the large openings for the passage of the air.
All metal parts are made of stainless steel, with a pin and a positive gold-plated pin to maintain good conductivity for a long time by limiting oxidation.
The screw of the 510 connection is adjustable, allowing a flush connection with the mod. The studs are provided with two holes each to insert the legs of your resistances in shifted in order to have a perfectly horizontal coil. In these holes, small Allen screws come to maintain your resistive son without breaking because this wire is folded by tightening and not crushed.
The tray is sufficiently dug so that a little more than a milliliter can be contained. Under the plate, you can clearly see the engravings that give the name of the dripper, the material used and the serial number.
As for the tank, it is in one part, the bottom of which is in stainless steel and the top, bell-shaped, in Pyrex. This last part looks solid and is rather thick. We note on the front, the head of a monkey and the logo of the engraved Ω. The material is judicious since the heat is particularly well dissipated.
A feeling quality that seems more than correct for the price.
Functional features
- Connection type: 510
- Adjustable positive stud? Yes, through an adjustment by thread, the assembly will be flush in all cases
- Presence of air flow regulation? Yes, and variable
- Diameter in mms maximum of the air regulation possible: 8
- Minimum diameter in mms of the air regulation possible: 0.1
- Air regulation positioning: Lateral positioning and benefiting resistors
- Atomization chamber type: Bell type
- Heat dissipation of the product: Excellent
Reviewer's comments on functional features
The tray is large enough to have two coils well ventilated in the room, thanks to these two studs with double holes. Thus, the resistors are well in the middle of the chamber to obtain excellent air flow under the coil.
The screw of the 510 connection and the positive pin are gold-plated. This material preserves oxidation for a long time to maintain a very good contact and serene conductivity. In addition, the pin screw is adjustable so that the Monkey can be associated with all mods.
The plateau is sufficiently dug for a mini reserve of liquid. In addition, with a transparent tank, it's easy to see when the wick dries.
The airflow is easily adjustable to adapt a ventilation to the fair compared to your assembly. As for the heat, it is very little propagated in the atomizer thanks to pyrex.
Drip-Tip Features
- Type of attachment of the drip-tip: Owner only
- Presence of a Drip-Tip? Yes, the vaper can immediately use the product
- Length and type of drip-tip present: Short
- Quality of the present drip-tip: Good
Reviewer's comments on the Drip-Tip
The drip-tip is in two parts, one in stainless steel and the other in delrin.
The steel part has openings on the side for the passage of steam. In this way, it is impossible to have juice rising in the mouth since the nozzle which enters the top-cap is closed and it is therefore through the openings that the steam rises. A top drip tip!
On the mouth side, it is possible to choose between the two rings provided, red or black, in order to perfect your set-up. On these rings, the monkey logo is also present to match the tank. Overall a short drip tip which is pleasant on the palate. The size of the opening is quite common, but the side steam inlets really help prevent liquid splashing.
Evaluation of the packaging
- Presence of a box accompanying the product: Yes
- Would you say that the packaging is up to the price of the product? Yes
- Presence of a user manual? No
- Is the manual understandable for a non-English speaker? No
- Does the manual explain ALL features? No
Vapelier's note on packaging: 2 / 5 
Reviewer's comments on conditioning
No instructions for use for this packaging, which unfortunately plumb a little note because this dripper is so simple, with a minimum of parts, that we go easily. In a rigid cardboard box, we find the dripper lying and wedged in a foam, next to a bag of accessories including:
• 1 Allen Key
• 3 Replacement seals for drip-tip
• 2 Replacement seals for the base
• 4 Replacement Allen Screw for Plots
• 1 Black Delrin tip for drip-tip
Appreciations in use
- Transport facilities with mod of test configuration: Ok for an inside jacket pocket (no deformations)
- Disassembly and cleaning facilities: Easy, even standing in the street, with a simple tissue paper
- Filling facilities: Super simple, even blind in the dark!
- Easy to change resistors: Easy but requires a workspace to lose nothing
- Is it possible to use this product throughout the day with several vials of EJuice? Yes perfectly
- Was there leak after one day of use? No
- In the event of leaks during the tests, descriptions of the situations in which they occurred:
Vapelier's note on ease of use: 4.4 / 5 
Reviewer's comments on the use of the product
Simple, practical and effective use:
Simple by the number of pieces that make up this dripper. A base, a top cap, no screwing, no particular editing, everything is childish.
Practice with the two holes on each stud to place your resistance well centered without the need to rework the legs. Maintaining these tabs is done by screwing the Allen screws that twist the wire and lock it without crushing it, so your wire can not break.
Efficient, since the space obtained in the chamber allows optimal air circulation under the coil which is released, with airholes that face the assembly and amplify the cooling while the flavor of your juices remains royal.
Similarly, the small size of this dripper makes the flavors optimal. Therefore, whether sub-ohm or not, the ratio steam / flavor is perfect, with excellent heat dissipation.
As for the drip-tip, its design is fabulous and prevents the rise of liquid in the mouth. A particularly efficient system.
Recommendations for use
- With which type of mod is it advisable to use this product? Electronics AND Mechanics
- With which mod model is it advisable to use this product? All in diameter 22mm
- With which type of EJuice is it advisable to use this product? All liquids without problem
- Description of the test configuration used: on electro box with a 0.24 ohm double coil and a power up to 50 Watts
- Description of the ideal configuration with this product: there is none in particular
was the product liked by the reviewer: Yes
Overall average of the Vapelier for this product: 4.8 / 5 
Link to a video review or blog maintained by the reviewer author of the review
The mood ticket of the reviewer
I am delighted with this tiny Monkey King who, beyond showing off your rigs through a pyrex tank, allows you to vape on powers from the most modest to the craziest.
The dissipation of heat is ideal and the flavors are precise and rigorous.
For the assembly, it is simple to make and the contacts via the selected materials, are perfect. Pine and airflows are adjustable. In short, what can I say more, I'm a fan of this Monkey !!!
Sylvie.I
(c) Copyright Le Vapelier SAS 2014 - Only full reproduction of this article is authorized - Any modification of any kind is totally prohibited and infringes the rights of this copyright.
