Header
IN SHORT:
Noxus by Blitz Enterprises
Noxus by Blitz Enterprises

Noxus by Blitz Enterprises

Commercial characteristics

  • Sponsor having loaned the product for the magazine: Evaps
  • Price of the tested product: 37.9 Euros
  • Product category according to its selling price: Mid-range (from 36 to 70 euros)
  • Atomizer Type: Single Bowl Dripper
  • Number of resistances allowed: 2
  • Resistance Type: Classic Reconstructible, Rebuildable Micro Coil, Reconstructible Classic Temperature Controlled, Rebuildable Micro Coil with Temperature Control
  • Supported Bit Type: Cotton, Fiber Freaks Density 1, Fiber Freaks Density 2, Fiber Freaks Yarn 2 mms, Fiber Freaks Cotton Blend
  • Quantity in milliliters announced by the manufacturer: 1.2

Reviewer comments on business characteristics

Of course the square-based atomizers already exist and that's good for the aesthetics of the set with our boxes. Too bad for the tubes, this Noxus does not really fit. The shape of this dripper is not its only originality, its top cap pivots horizontally from one of the corners of the body and facilitates the manipulation of filling, more risk of letting go of part of the ato in a good old puddle mud or see his top cap disappear through a manhole.

For a reasonable price, you can also use to mist a good volume with your favorite 100% VG, this dripper is made for that. The ancestor of the atomizers is constantly renewed, so it is the turn of the Noxus parading on your box, let's see it in detail.

logo Blitz ents

Physical characteristics and felt quality

  • Width or Diameter of the product in mms: 22
  • Length or height of the product in mms as it is sold, but without its drip tip if it is present, and regardless of the length of the connection: 39
  • Weight in grams of the product as sold, with its drip tip if it is present: 57
  • Material constituting the product: Stainless steel, Copper
  • Form Factor Type: Hatty
  • Number of component parts without screws and washers: 3
  • Number of threads: 4
  • Quality of the threads: Good
  • Number of O-rings, Dript-Tip excluded: 2
  • Quality of O-rings present: Medium
  • O-ring positions: Drip-Tip connection, body base
  • Capacity in milliliters actually usable: 1.2
  • Overall, do you appreciate the quality of manufacture of this product with regard to its price? Yes

Rating of the vapelier as to feelings quality: 3.6 / 5 3.6 5 out of stars

Reviewer's comments on physical characteristics and perceived quality

Stainless steel is the major part of this dripper's materials. It is a square section of 22mm, to adapt to the standards of the moment. Its height with the drip-top is 49mm (excluding 510 connector), which makes it a rectangular parallelepiped atomizer (without the drip-top the height is 39mm).

Noxus fb

The body provides the function of connection between the base and the top cap, it serves as a heating chamber. 4 air inlet windows are used at its base and provide power, regardless of the configuration of the top-cap of your mod.

Noxus Blitz Ents open 2t

The 4mm thick top-cap rotates 360 ° around an axis positioned on one of the angles of the ato body. The vape position (closed) is maintained by three magnets, arranged at the three free corners, corresponding to the three magnets of the body located similarly. It receives either the proprietary drip-top or the adapter for 510 drip-tip supplied.

The cylindrical drip-top in Peek is equipped with 22 holes boring its base (each of them measuring 1,5mm of diameter, to allow a suction surface of approximately 9 cm²). This peculiarity offers an advantage of which I will speak again later.

The 3-pole plate is in stainless steel, of classic design (2 side negatives, 1 positive in the center) with Phillips head clamping screws, closing 2,5mm diameter lights for the insertion of thick resistors, multi type strands. The not very spacious tank is rather deep, on average 5,5mm (because of machining imperfections in the mass) and contains approximately 1,2ml of juice.

Noxus Blitz Ents tray 2

Noxus Blitz Ents airholes

 

 

 

 

 

 

 

 

 

The air supply (2 x 9 x 1,5 mm) is underneath without adjustment, we will come back to it. The 510 stainless steel connection contains a positive central pin in adjustable copper, it seems. The non-equipped atomizer weighs 57g.

That of the test is matte black, NOXUS is engraved vertically on one of the faces of the body, it is the only remarkable and visible graphic particularity, whereas on the base of the plate are more discreetly laser engraved the name of the manufacturer and a Serial No.

Without being designed as an object of high precision, the Noxus is properly machined and well finished, the joints ensuring the connections of the retractable parts are thin and silicone. The stainless steel tightening screws of the resistors are of good size and do not shear the wire. The design of the top cap is effective, its closed maintenance is satisfactory (as long as the magnets have not been demagnetized by heat ....).

 

Functional features

  • Connection type: 510
  • Adjustable positive stud? Yes, through an adjustment by thread, the assembly will be flush in all cases
  • Presence of air flow regulation? Yes, but fixed only
  • Diameter in mms maximum of the air regulation possible: 10
  • Minimum diameter in mms of the air regulation possible: 10
  • Positioning of the air regulation: From below and benefiting the resistances
  • Atomization chamber type: Conventional / reduced
  • Heat dissipation of the product: Excellent

Reviewer's comments on functional features

 The feature that is the originality of this dripper is, of course, at the top cap. This concept of pivot, which makes it possible not to remove a part of the ato to fill it, is an asset ergonomic, practical, perfectly adapted to this kind of material. I must admit, the idea is bright.

Only my fussy mind notices that this system could have worked with one or more balls providing the closing function instead of the magnets. They will not support the numerous sequences of intense heat (sub-ohm obliges), likely in the long run, to alter their primary function: magnetism.

I concede that the ball system involves a reminder of the top cap towards the body to ensure proper sealing and the thing is technically more difficult to achieve than it seems. Only a long-term experience can demonstrate a misleading vision on my part, on the long-term viability of this magnetic option.

In the meantime, it's super convenient and I enjoy a maximum.

Two particular points, not really positive, appeared with the use of the Noxus. The joints connecting to the plate are too thin, they do not provide enough pressure to prevent the rotation of the body on itself, which often cancels the line drawn together by the box and the ato. This defect is felt especially when opening the top cap, we find ourselves readjusting the set quite frequently.

Another defect inherent in the design of the air supply system under the resistors, well known to owners of Magma: juice leaks when filling. I grant you that the assembly and the arrangement of the capillaries play a lot in this mishap, but the positioning under the plate of the airholes does not help matters either. You are therefore warned, the filling, as easy as it is, must be done sparingly, otherwise you will have to carry around a roll of paper towels and waste your juice.

The assembly does not present any particular difficulty although the design 3 studs and screwing over it is impractical, and that the studs vis-à-vis are better suited to my sense, for bigleux with big fingers in my genre. On the other hand, you have 2,5mm of lights to insert your favorite porn-coils and this Noxus will accept them without flinching.

Noxus Blitz Ents tray

I, for my part, wisely mounted in Kanthal of 5 / 10th for a diameter of 2,5mm and 4 turns which allowed me to make a double coil of 0,25 ohm, Fiber freaks density 1 for the draining. The eVic mini did the rest, 65W and onwards Guingamp!

Noxus Blitz Ents set

“Here in London, the fog has arrived, I repeat… .. the fog has arrived”. And not just a little! The Noxus is a very good cloud producer, it is indisputable and it only heats moderately, (which makes me now doubt my pessimistic mention of a probable overheating of the magnets). Regarding the drip top, no problem either, no projections and no overheating, the total foot.

In terms of taste this dripper is of a good level, the heating chamber (the body of the ato), largely occupied by the base and the assembly has a small volume favoring the concentration of flavors, despite a supply of air generous that we can only manage by our own inspiration.

The airholes located under the resistors have always been part of the quality of the restitution of flavors and the density present in the air / vapor mixture produced. The designers played the safety card by opting for a proven, classic system.

Drip-Tip Features

  • Type of drip-tip attachment: Owner but passage to 510 through a supplied adapter
  • Presence of a Drip-Tip? Yes, the vaper can immediately use the product
  • Length and type of drip-tip present: Short with heat evacuation function
  • Quality of the drip-tip present: Very good

Reviewer's comments on the Drip-Tip

Another performing actor for this Noxus is his drip top. The peek which constitutes it is a high performance composite thermoplastic, stable in a range of temperatures between -60 and + 250 ° C and which, moreover, conducts heat very poorly. No wonder the choice of this material has become widespread among manufacturers of atomizers, modders and manufacturers of drip-tips. The useful mouthpiece in the mouth protrudes from the top-cap by 10mm, it is a cylinder of 19mm outside diameter for 15mm inside. The mesh of 22 holes drilled at the base makes it possible to effectively block the route of hot projections of juice even when the suction is sustained. A single O-ring effectively maintains it in its housing.

Noxus Blitz Ents open now

A peek ring is provided to allow you to change drip tip and switch to a normal 510.

Evaluation of the packaging

  • Presence of a box accompanying the product: Yes
  • Would you say that the packaging is up to the price of the product? Can do better
  • Presence of a user manual? No
  • Is the manual understandable for a non-English speaker? No
  • Does the manual explain ALL features? No

Vapelier's note on packaging: 1.5 / 5 1.5 5 out of stars

Reviewer's comments on conditioning

Conditioning is a little poor relative of the kit. A transparent cubic plastic box with rounded corners, contains a rigid foam that keeps the ato upright by the 510 connector, the same foam pierced to the diameter of the drip-top ensures both the position of the ato and the closure of the lid . A bag containing 2 replacement screws, 2 silicone gaskets and the 510 adapter is also part of the lot.

Noxus Blitz Ents package

No instructions, except a simple warning in English warning that this object is intended for an experienced user, that its use requires knowledge of Ohm's law and batteries and that only the purchaser is responsible to learn about these subjects before buying this product (and also that batteries are not included ...), well let's see ...

We will therefore say that it is better to hurry to buy it before it is banned for sale in Europe, because of a breach of regulatory obligations, as regards the presence of a user manual. an appliance likely to come into contact with an electrical source. So this is a conditioning that plummets the overall rating of this product, yet very interesting.

Appreciations in use

  • Transport facilities with mod of test configuration: Ok for an inside jacket pocket (no deformations)
  • Disassembly and cleaning facilities: Easy, even standing in the street, with a simple tissue paper
  • Filling facilities: Easy, even standing in the street
  • Easy to change resistors: Easy but requires a workspace to lose nothing
  • Is it possible to use this product throughout the day with several vials of EJuice? It will take a little juggling, but it is doable
  • Have there been any leaks after a day of use? Yes
  • In the event of leaks during the tests, descriptions of the situations in which they occur:
  • Hazardous filling + airholes from below = leaks

Vapelier's note on ease of use: 3.1 / 5 3.1 5 out of stars

Reviewer's comments on the use of the product

In use, apart from possible leaks when filling a little too copious, the Noxus is a good steam machine, it only heats moderately at 65w for 0,25 ohm, and correctly restores the tastes of the juices. Its cleaning is very simple. If you can, consider changing the O-rings to: diam. ext. 16 x 1,25mm thick or 17 x 1mm available here 

The juice consumption in ULR (ultra low resistance) at 65W is quite high, but everyone knows that this is normal, so I skip over the details (and I drink a drink, after this really hard hit which means, “t 's dry my boy, stock up ”)    

Recommendations for use

  • With which type of mod is it advisable to use this product? Electronics AND Mechanics
  • Which mod model is it recommended to use this product with? A box in 22
  • With which type of EJuice is it advisable to use this product? All liquids without problem
  • Description of the test configuration used: Double coil Kanthal 0,50 - 0,25 ohm diam 2,5 mm - FF1 - eVic VTC mini 65W
  • Description of the ideal configuration with this product: Sub ohm up to 0,1 ohm to make big clouds.

was the product liked by the reviewer: Yes

Overall average of the Vapelier for this product: 3.9 / 5 3.9 5 out of stars

Link to a video review or blog maintained by the reviewer author of the review

 

The mood ticket of the reviewer

Here we are finally at the end of this test, thank you for your patient reading, a little effort and it will be finished.

The Noxus is an atomizer that combines aesthetics, practice and some originality of design. Clearly intended for the big production of steam, it is not left for you to appreciate your favorite liquids. It must demonstrate in time its mechanical qualities, but for peaceful use, no doubt it is up to the performance of its first few weeks of use.

Its price is correct, its packaging much less. Nevertheless, I allow myself here to advise you that you are novice or experienced, you do not risk being more disappointed than I have been using a whole day, faults are easily corrected and we are adapts easily to those who can not. Also be aware that the passable general score obtained by the product here, is the reflection of a set of elements, that the atomizer alone probably does not deserve, but the protocol is well done and we must take into account all aspects to allow you a comparison as objective as possible.

noxus comoris

Let us know your experience of Noxus in flash testing, it is by listening / reading your many comments that manufacturers are considering changing their products, make them more attractive and often, thanks to you, more efficient and adapted.

Do not hesitate.

See you soon.   

(c) Copyright Le Vapelier SAS 2014 - Only full reproduction of this article is authorized - Any modification of any kind is totally prohibited and infringes the rights of this copyright.

Print Friendly, PDF & Email
Com Inside Bottom
Com Inside Bottom
Com Inside Bottom
Com Inside Bottom

About the Author

58 years old, carpenter, 35 years old of tobacco stopped dead on my first day of vaping, December 26, 2013, on an e-Vod. I vape most of the time in mecha / dripper and make my juices ... thanks to the preparations of the pros.