Commercial characteristics
- Sponsor having loaned the product for the magazine: Evaps
- Price of the tested product: 37.9 Euros
- Product category according to its selling price: Mid-range (from 36 to 70 euros)
- Atomizer Type: Single Bowl Dripper
- Number of resistances allowed: 2
- Resistor Type: Rebuildable Micro coil with temperature control
- Supported Bit Type: Cotton, Fiber Freaks Density 1, Fiber Freaks Density 2, Fiber Freaks Yarn 2 mms, Fiber Freaks Cotton Blend
- Quantity in milliliters announced by the manufacturer: 1
Reviewer comments on business characteristics
Hatty is a dripper made mainly for a large production of steam, but that does not prevent it from also correctly rendering good flavors.
Equipped with two times two airflows on the tank and on the base, it also has on its plate, two studs with two holes each allowing constructions with all the existing “super” wires. In addition, its tank can contain a small reserve of liquid, which is appreciable for such a product.
Its pin is adjustable so that this atomizer can fit on all your mods, gold plated, it also ensures a very good conductivity.
An atomizer made for basic daily use as well as for much more advanced use for power vaping. This Hatty dripper is available in two colors: black or steel.
Physical characteristics and felt quality
- Width or Diameter of the product in mms: 22
- Length or height of the product in mms as it is sold, but without its drip tip if it is present, and regardless of the length of the connection: 32
- Weight in grams of the product as sold, with its drip tip if it is present: 44
- Product Components: Stainless Steel, Gold Plated, Delrin
- Form Factor Type: Kayfun / Russian
- Number of component parts without screws and washers: 4
- Number of threads: 3
- Quality of the threads: Good
- Number of O-rings, Dript-Tip excluded: 3
- Quality of O-rings present: Medium
- O-Ring Positions: Drip-Tip Connection, Top Cap - Tank, Bottom Cap - Tank
- Capacity in milliliters actually usable: 1
- Overall, do you appreciate the quality of manufacture of this product with regard to its price? Yes
Rating of the vapelier as to feelings quality: 3.6 / 5 
Reviewer's comments on physical characteristics and perceived quality
This Hatty is made of stainless steel with a smooth matte black finish that is pleasant to the touch. The pin is adjustable in copper and covered with a gold plating which makes the contact excellent with good resistance to oxidation.
This atomizer is supplied with a drip top and in addition, an adapter to place a more personal drip tip. these two parts are in Delrin and screw correctly on the top cap which fits into the tank.
There are four airflows, two on the tank and two under the board. This gives this atomizer an immense circulation of air, on the sides and under the resistors, which makes it possible to make subohm assemblies quite specific to allow it to collect very high powers. In addition, the size and interior space of the tank are ideal for all types of rigs.
On the lower part of the tank, inside, two notches are provided to fit on one side of the base in the lug, in order to systematically have "H" openings at the level of the resistors built. A simple and intelligent positioning system, which prevents the tank body from rotating during adjustments.
The tray is functional despite some machining traces left by the tools. Thanks to two studs with two holes each, you can easily fix the legs of the resistors. The difference of 12mm is consistent between the center of the two holes, compared to a conventional dripper. In addition, their diameter is 2.5mm, sufficient for large wires, or multi-strand assemblies.
The tray forms a single tank, the depth of which can contain 1ml of liquid.
The tank is held on the base by two joints. Although their function is effective, I regret that they are so fine. The bottom seal is a little loose and tends to get pinched when fitting together, creating the risk of cutting it.
The only engravings on this Hatty, are under the atomizer, bearing the name of the dripper and the one who designed it. The engravings are crisp and simple.
Overall, it is a medium quality dripper in relation to its price, materials and machining work are good but the joints are too thin and will need to be changed often.
Functional features
- Connection type: 510
- Adjustable positive stud? Yes, through an adjustment by thread, the assembly will be flush in all cases
- Presence of air flow regulation? Yes, and variable
- Diameter in mms maximum of the air regulation possible: 10
- Minimum diameter in mms of the air regulation possible: 5
- Positioning of the air regulation: From below and benefiting the resistances
- Atomization chamber type: Bell type
- Heat dissipation of the product: Excellent
Reviewer's comments on functional features
The main function of this atomizer is its ability to produce a large amount of steam.
Thanks to the large holes on the studs, it is possible to use large diameter wires to build double (or quadruple for the more patient / skilful) resistances. The spacing of the studs gives access to perfectly centered assemblies, without having to rework the position of the legs of your resistors.
This atomizer supports large powers well beyond 60W, with these two large airflows located at the level of the tank, on each side. They are adjustable, "H" shaped, handling to adjust the air inlets, is very flexible and practical. Although the shape is original, it is difficult to estimate at first glance a comparison with a cyclops-type opening, however, in practice, it remains comparable to those with a width of 3mm X 7mm. Those which are on the base, also have an "H" shape but are fixed and slightly smaller.
The association between the tray, the airflow and the space in the room, favors subhom assemblies for power vaping while keeping a reasonable heating of the atomizer which dissipates heat well. Simple coil assemblies are obviously also possible.
On the plateau, we have a large single tank since it is close to 6mm depth to put a little more 1ml liquid.
At the level of the 510 connection, the pin is adjustable by a gold-plated screw which also ensures a good contact lasting over time.
What is a little less common on a dripper is to find a kind of stopper (lug) on the base of the tank which prevents it from turning when you rotate the top cap to open / close the airflow.
Drip-Tip Features
- Type of drip-tip attachment: Owner but passage to 510 through a supplied adapter
- Presence of a Drip-Tip? Yes, the vaper can immediately use the product
- Length and type of drip-tip present: Short
- Quality of the present drip-tip: Good
Reviewer's comments on the Drip-Tip
With the Hatty, Blitz provides you with a flared drip top and an adapter to adapt a drip tip that matches a 510 connection
Both are Delrin and effectively dissipate heat, the material is correct in the mouth but the shape of the drip-top tends to slip on the lips.
These two elements are screwed perfectly on the top cap and the look of the drip top gives a nice finish to this atomizer.
Evaluation of the packaging
- Presence of a box accompanying the product: Yes
- Would you say that the packaging is up to the price of the product? Yes
- Presence of a user manual? No
- Is the manual understandable for a non-English speaker? No
- Does the manual explain ALL features? No
Vapelier's note on packaging: 2 / 5 
Reviewer's comments on conditioning
Despite a well-studied conditioning, we notice immediately the absence of instructions, which is a pity. In a thin box we discover a totally transparent box with a magnetic lid that pivots from one of the corners.
Lying in a black foam the atomizer and all these accessories are perfectly wedged for excellent protection. With the Hatty you will find:
- An Adapter for Drip Tip 510
- A large Drip Tip in Delrin
- 2 Replacement Phillips screws
- 3 replacement silicone gaskets
Appreciations in use
- Transport facilities with mod of test configuration: Ok for an inside jacket pocket (no deformations)
- Disassembly and cleaning facilities: Easy, even standing in the street, with a simple tissue paper
- Filling facilities: Easy, even standing in the street
- Easy to change resistors: Easy but requires a workspace to lose nothing
- Is it possible to use this product throughout the day with several vials of EJuice? Yes perfectly
- Was there leak after one day of use? No
- In the event of leaks during the tests, descriptions of the situations in which they occurred:
Vapelier's note on ease of use: 4.4 / 5 
Reviewer's comments on the use of the product
In use, this dripper is really nice. For those who are looking for originality in their montages, they will be able to give their heart to joy.
The spacing and the height of the studs offer the possibility of placing the resistors straight and high enough without the need to twist the legs, they will be correctly centered.
For tightening, grub screws are very small and require a Phillips screwdriver well suited for proper leg hold.
The size of the tank associated with the large airflow, not only provides a large volume of vapor but also a restitution of flavors which remains satisfactory. They are not exceptional but suitably restored.
What I really appreciated in use is the blocking of the tank to prevent it from rotating when turning the top cap when adjusting the airflow. It is a relatively simple and very efficient system, because we always have the "H" opening placed in front of the resistance.
On the other hand, several times, when I closed the atomizer after having soaked my wick, the bottom seal tended to relax and get stuck. Be careful not to cut it by this regular manipulation, or prefer filling with the drip top.
Recommendations for use
- With which type of mod is it advisable to use this product? Electronics AND Mechanics
- Which mod model is it recommended to use this product with? for special assemblies in subhom, it is preferable to use an electronic box
- With which type of EJuice is it advisable to use this product? All liquids without problem
- Description of the test configuration used: Box electro up to 75W on various assemblies (see photos in use)
- Description of the ideal configuration with this product: the ideal configuration is on 0.3Ω assemblies with power around 50W to reconcile steam and flavor
was the product liked by the reviewer: Yes
Overall average of the Vapelier for this product: 4.3 / 5 
Link to a video review or blog maintained by the reviewer author of the review
The mood ticket of the reviewer
Although a simple assembly can be achieved, this Hatty is not too suitable for this type of vape at the risk of obtaining slightly fair flavors at low power. On the other hand, it is quite capable of associating large achievements with a correct restitution of flavors for very high potencies. Performance generally difficult to obtain.
The position of the studs is ideal for varied and original montages that will meet the needs of power vaping.
Blitz offers us a little gem extremely aerial, in a simple look, able to dispel strong heat, for a reasonable price / quality ratio.
Sylvie.I
(c) Copyright Le Vapelier SAS 2014 - Only full reproduction of this article is authorized - Any modification of any kind is totally prohibited and infringes the rights of this copyright.
