Header
IN SHORT:
Storm A by Orieco
Storm A by Orieco

Storm A by Orieco

Commercial characteristics

  • [/ if] Price of the tested product: 21.90 Euros
  • Product category according to its selling price: Entry level (from 1 to 35 euros)
  • Atomizer type: Multi-tank dripper
  • Number of resistances allowed: 2
  • Resistor Type: Rebuildable Micro coil
  • Type of wicks supported: Cotton
  • Quantity in milliliters announced by the manufacturer: 1

Reviewer comments on business characteristics

A classic offer, at a classic price.

Physical characteristics and felt quality

  • Width or Diameter of the product in mms: 22
  • Length or height of the product in mms as it is sold, but without its drip tip if it is present, and regardless of the length of the connection: 25
  • Weight in grams of the product as sold, with its drip tip if it is present: 40
  • Material composing the product: Steel
  • Form Factor Type: Igo L / W
  • Number of component parts without screws and washers: 3
  • Number of threads: 1
  • Quality of the threads: Good
  • Number of O-rings, Dript-Tip excluded: 5
  • Quality of O-rings present: Sufficient
  • O-ring positions: Top Cap - Tank, Bottom Cap - Tank, Other
  • Capacity in milliliters actually usable: 1
  • Overall, do you appreciate the quality of manufacture of this product with regard to its price? Yes

Rating of the vapelier as to feelings quality: 3.9 / 5 3.9 5 out of stars

Reviewer's comments on physical characteristics and perceived quality

A dripper of very good quality at the machining level.
The joints are a bit less in quality
Two large tanks are placed under the resistances to contain liquid in reserve

Functional features

  • Connection type: 510
  • Adjustable positive plot? No, a flush mount can only be guaranteed through an adjustment of the positive pad of the battery or the mod on which it will be installed
  • Presence of air flow regulation? Yes, and variable
  • Diameter in mms maximum of the air regulation possible: 9
  • Minimum diameter in mms of the air regulation possible: 2
  • Air regulation positioning: Lateral positioning and benefiting resistors
  • Atomization chamber type: Bell type
  • {Heat dissipation of the product: Insufficient

Reviewer's comments on functional features

We regret the fact that there is no adjustable positive stud, hoping that your mecha mod is equipped for flush mounting.
For the air regulation settings, you have 6 holes of 1.5 mm (double resistance) and 1 hole of 2 mm (single resistance)
Disassembly is easy, and will allow you to clean all the parts

Drip-Tip Features

  • Drip tip type: 510 Only
  • Presence of a Drip-Tip? No, the vapoteur will have to acquire a compatible drip-tip, in order to be able to use the product
  • Length and type of drip-tip present: No drip tip present
  • Quality of the present drip-tip: No present drip tip

Reviewer's comments on the Drip-Tip

No compatibility concerns with the drip-tips that I tested.
A Teflon model will be necessary so as not to “burn” you

Evaluation of the packaging

  • Presence of a box accompanying the product: Yes
  • Would you say that the packaging is up to the price of the product? Yes
  • Presence of a user manual? No
  • Is the manual understandable for a non-English speaker? No
  • Does the manual explain ALL features? No

Vapelier's note on packaging: 2 / 5 2 5 out of stars

Reviewer's comments on conditioning

A simple package, with a few spare parts (screws, gaskets)

Appreciations in use

  • Transport facilities with the mod of the test configuration: Ok for a side pocket of Jean (no discomfort)
  • Disassembly and cleaning facilities: Easy but requires a workspace
  • Filling facilities: Easy but requires a workspace
  • Easy to change resistances: Difficult, requires various manipulations
  • Is it possible to use this product throughout the day with several vials of EJuice? Yes perfectly
  • Was there leak after one day of use? No
  • In the event of leaks during tests, descriptions of the situations in which they occurred

Vapelier's note on ease of use: 3.3 / 5 3.3 5 out of stars

Reviewer's comments on the use of the product

It is a dripper all that is most normal, in (re) assembly of the coil the central pad with knurled screw as well as its screws will require a work surface to perform the operation, because by tightening, the coils tend to move.

Recommendations for use

  • What type of mod is it advisable to use this product with? Mechanical
  • With which mod model is it advisable to use this product? 22mm mecha mod
  • With which type of EJuice is it advisable to use this product? All liquids without problem
  • Description of the test configuration used: LAB mechanic mod from Atmizoo, an MNKE 18650 battery, dual coil assembly at 0.7Ohms, cotton bacon
  • Description of the ideal configuration with this product: A 22mm mecha mod with an IMR, a total resistance (single or double) not too low, cotton (carded, bacon ...)

was the product liked by the reviewer: Yes

Overall average of the Vapelier for this product: 3.6 / 5 3.6 5 out of stars

Link to a video review or blog maintained by the reviewer author of the review

The mood ticket of the reviewer

A good dripper to start, or to render flavors!
And yes, this dripper really surprised me with its rendering of flavors.
On the other hand it is better not to lower the values ​​of the resistors too much because it tends to heat up!
This model takes some ideas of the Origen, putting its personal touch

Note that a v2 model is available, it takes the design but instead of having 2 × 3 holes, there is a slot for the airflow adjustment.
Do not forget to place your air flows and therefore your coils so that they are aligned!

(c) Copyright Le Vapelier SAS 2014 - Only full reproduction of this article is authorized - Any modification of any kind is totally prohibited and infringes the rights of this copyright.

Print Friendly, PDF & Email
Com Inside Bottom
Com Inside Bottom
Com Inside Bottom
Com Inside Bottom

About the Author

36 years, happy vaper since July 2013, addicted to new technologies and find the palate of flavors thanks to the vape! Notice to the amateurs !! Oh yes I like the ponies of the woods too.