Commercial characteristics
- Sponsor having loaned the product for the magazine: Heaven gifts
- Price of the tested product: 32.9 Euros
- Product category according to its selling price: Entry level (from 1 to 35 euros)
- Atomizer Type: Single Bowl Dripper
- Number of resistances allowed: 2
- Resistance Type: Classic Reconstructible, Rebuildable Micro Coil, Reconstructible Classic Temperature Controlled, Rebuildable Micro Coil with Temperature Control
- Type of wicks supported: Silica, Cotton, Fiber Freaks Density 1, Fiber Freaks Density 2, Fiber Freaks Yarn 2 mms, Fiber Freaks Cotton Blend
- Quantity in milliliters announced by the manufacturer: 2
Reviewer comments on business characteristics
The Digiflavor Lynx is quite a beast. Its appearance is simple and very refined, it leaves nothing to be seen, neither logo, nor even the airflow. In its black version, it is a two-tone coating which is similar to a very dark “gun metal” type black color, a little more intense than the famous Magma Reborn, however the comparison stops there. A stainless steel version is also available for this product.
Its diameter is large since like many drippers it is a fashion to have a diameter of 25mm. The manufacturers have understood it well, this offers a much more important place for all assemblies up to the most exotic, and allows to have a suitable liquid reserve for the Cloud. This Lynx in no way derogates from these advantages and its reserve is appreciable with almost 2ml of capacity for its tank, but it has another particularity, this dripper can be put in the pocket without fear of staining you because it closes completely so that the airflow is no longer apparent which hermetically seals this atomizer.
This Lynx RDA does not leave too much choice, it will be a compulsory double coil for the assembly since the airflow although adjustable is done simultaneously on two sides at the same time and is extremely airy, so to combine flavor and vapor, this compromise will be essential.
Physical characteristics and felt quality
- Width or Diameter of the product in mms: 25
- Length or height of the product in mms as sold, but without its drip-tip if it is present, and regardless of the length of the connection: 26
- Weight in grams of the product as sold, with its drip-tip if it is present: 50
- Material constituting the product: Stainless steel, Delrin
- Form Factor Type: Kayfun / Russian
- Number of component parts without screws and washers: 4
- Number of threads: 2
- Quality of the threads: Very good
- Number of O-rings, Drip-Tip excluded: 1
- Quality of O-rings present: Very good
- O-Ring Positions: Bottom Cap - Tank
- Capacity in milliliters actually usable: 2
- Overall, do you appreciate the quality of manufacture of this product with regard to its price? Yes
Rating of the vapelier as to feelings quality: 5 / 5 
Reviewer's comments on physical characteristics and perceived quality
Digiflavor offers us a beautiful quality product. The machining is perfect and the thickness of the material of each part is comfortable.
This dripper is made up of 4 parts (drip-tip included) with a cap that adjusts the airflow located on the central ring by screwing or unscrewing it. The thread squeaks a little at the start but this slight noise does not interfere with the operation which is done without difficulty. Subsequently, the noise disappears.
The central ring and with two large openings that will be more or less obstructed by the cap, or totally for transport in a pocket. This ring is equipped with an effective seal that leaves nothing to filter. It fits into the base of the atomizer with its two pins, and this is perhaps the weakness of this dripper, because this piece is so well molded / adjusted that it is really difficult to get out or to put it back in place. I hope that with time, the operation will be less difficult and therefore less restrictive.
The 25mm diameter base really offers a good place, both for its deep tank which can store a quantity of liquid close to 2ml but also for the place of the assembly with coils of large diameter or extravagant assemblies. The plate has two rectangular and wide studs which clamp the resistive in the manner of a jaw. These two studs not only have a large space which allows to perfectly wedge the resistive (from 0.4mm) but very pleasant thing is that their loosening is helped by a small spring around the screw which is quite long .
For my test product, I have the black version with a slight color shift between the upper part and the lower part which is not visible to the naked eye but under the flash of a camera it differs a little (definitely a different bath). Under the base we have the inscriptions that are affixed on this atomizer and we find the name of the dripper, its serial number and some other inscriptions. On the top-cap is engraved the name of the manufacturer, Digiflavor. The pin is an adjustable brass screw that allows adjustment if necessary, it can also be replaced by a pin pierced for the BF (bottom feeder) if you have the right length since its end is distinguished on the board.
It is a dripper of a good quality, made for cloud double coil and transportable, even already mounted, with soaked wicks. However in use, I see some constraints that are not nasty but present.
Functional features
- Connection type: 510
- Adjustable positive stud? Yes, through an adjustment by thread, the assembly will be flush in all cases
- Presence of air flow regulation? Yes, and variable
- Diameter in mms maximum of the air regulation possible: 10
- Minimum diameter in mms of the air regulation possible: 0.1
- Positioning of the air regulation: From below and taking advantage of the resistances and lateral in the same perspective
- Spray chamber type: Conventional / Wide
- Heat dissipation of the product: Excellent
Reviewer's comments on functional features
The functional characteristics of Lynx are obvious. Just take a look at the studs with a large square on each side of the central screw and the length of the same screw that allows easy passage of son.
It is therefore specially designed so that you can have fun to make simple assemblies in minimum double coil, with big threads, like exotic montages worked with Clapton, fused or other compositions of your choice.
Obviously everything is linked, so the tank also has a good capacity of almost 2ml so as not to dry out your wick in a single suction and the air-holes which are positioned on each side of the ring, offer a monstrous opening that you can feel to aspiration. Because in reality, there is a double airflow. The first, very visible by the two air-holes visible on the ring and the second, which ensures a taste quality by passing under the plate, then circulates in the walls of the base to finish under the air-holes by the hollowed openings.
The pin is adjustable by a screw that requires a small flat screwdriver and the airflow is variable by turning the cap on the base. But it can also close completely which gives us the opportunity to transport without risk of leakage, in case the wicks are still soaked with liquid.
This lynx is made for big clouds and cloud hunters will love it ...
Drip-Tip Features
- Type of drip-tip attachment: Owner but passage to 510 through a supplied adapter
- Presence of a Drip-Tip? Yes, the vaper can immediately use the product
- Length and type of drip-tip present: Medium
- Quality of the present drip-tip: Good
Reviewer's comments on the Drip-Tip
The Lynx comes with a medium size Delrin drip-tip whose drip is between the tip and the top with an internal diameter of 10mm. The material is pleasant on the palate and despite the monstrous assemblies that can be made, it does not burn the lips and offers a substantial passage of the vapor which coincides as it should with the airflow.
So that you can use your favorite drip-tips, an extra cap is provided. It remains more basic and also agrees with the dripper, it lacks more than the accessory of your choice.
Evaluation of the packaging
- Presence of a box accompanying the product: Yes
- Would you say that the packaging is up to the price of the product? Yes
- Presence of a user manual? No
- Is the manual understandable for a non-English speaker? No
- Does the manual explain ALL features? No
Vapelier's note on packaging: 2 / 5 
Reviewer's comments on conditioning
In a red and white cardboard box, on two floors, we find in the foreground, the atomizer completely closed, wearing its drip-tip. The atomizer being comfortably wedged in a white foam, it is properly protected.
Below, we discover a small bag containing a "T" screwdriver, two spare screws and additional seals.
Unfortunately no instructions are provided, you will have to be satisfied with the few explanations given on the back of the box which are too brief for my taste and moreover, are written in English.
Appreciations in use
- Transport facilities with the mod of the test configuration: Ok for a side pocket of Jean (no discomfort)
- Disassembly and cleaning facilities: Easy but requires a workspace
- Filling facilities: Easy, even standing in the street
- Easy to change resistors: Easy but requires a workspace to lose nothing
- Is it possible to use this product throughout the day with several vials of e-Juice? Yes perfectly
- Was there leak after one day of use? No
- In the event of leaks during the tests, descriptions of the situations in which they occur:
Vapelier's note on ease of use: 4 / 5 
Reviewer's comments on the use of the product
The use is very simple since it is a dripper, not enough to write a novel, however to build your assembly, it will be necessary to remove the cap and the ring, and this is where the first concern comes to complicate the 'operation, since the ring is so adjusted that I had to unscrew the cap, then carefully use a screwdriver to greyhound to remove this ring. I reassure you, this is done without leaving a trace.
It is imperative to build two identical resistors since the two airflows are reduced at the same time and as there are only two pads, the two resistors must be placed at the same time and fixed simultaneously. This is perhaps the only big constraint that there can be during the assembly, especially if one is used to the Velocity type chainrings, which offer an individual fixation for each leg. Despite this, the two studs have in the center of the fixing screw, a spring which allows the jaws to be opened without difficulty, this is an appreciable detail which facilitates handling when passing the wires, but be careful not to lose it. if you completely remove the screw.
The next operation may be more difficult, you have to put that sacred ring back on, but you will get there (although I wondered). I hope that it is not the same on all models, however, after a few uses the fitting becomes a little less recalcitrant. Because when you have to add a few drops of liquids to the capillary, unscrewing the cap becomes tedious, or else go through the drip-top which is only 10mm in diameter.
On the vape side, it is a dripper that provides a huge vapor depending on the assembly made, but the compromise with the flavors remains quite suitable, provided you choose an appropriate liquid, supporting for high powers. The heat dissipation is well dimensioned by largely aerial arrivals.
The big advantage of this dripper is to be able to close completely by screwing the cap to obstruct the airholes. Thus, this ato will be transportable in a pocket without risk of leakage, the seal located on the ring ensuring the seal.
Recommendations for use
- What type of mod is it advisable to use this product with? Electronic
- Which mod model is it recommended to use this product with? a box with a power of at least 50W
- With which type of EJuice is it advisable to use this product? All liquids without problem
- Description of the test configuration used: double coil assembly of 0,3 ohm with the Therion at 58W
- Description of the ideal configuration with this product: There are none in particular
was the product liked by the reviewer: Yes
Overall average of the Vapelier for this product: 4.7 / 5 
Link to a video review or blog maintained by the reviewer author of the review
The mood ticket of the reviewer
This Lynx is a great success, despite its very sober, almost austere appearance, it offers appreciable discretion. The machining is very well done, the finishes have been seriously worked and it very precisely offers a beautiful vapor which combines with honorably restored flavors for a power vaping type dripper.
The tank and the airflow are well proportioned to this kind of atomizer which accepts to go up easily in the watts. The only big problem with this lynx remains the ring which fits and dislodges with difficulty, even if after several manipulations the system is less restrictive, it still remains too narrow, only time will tell us if the things will improve even more.
The assembly is not as simple as a Velocity plate, by requiring the simultaneous fixing of the two coils, but the studs provided with a spring on the screw are very judicious and practical.
The quality / price ratio, both in terms of material and that of the vape, defines this dripper as a very good compromise.
Sylvie.I
(c) Copyright Le Vapelier SAS 2014 - Only full reproduction of this article is authorized - Any modification of any kind is totally prohibited and infringes the rights of this copyright.
