IN SHORT:
Noisy cricket by wismec [Flash Test]
Noisy cricket by wismec [Flash Test]

Noisy cricket by wismec [Flash Test]

A. Commercial specifications

  • Price of the tested product: 39.90 Euros
  • Type of mod: Hybrid mechanics
  • Shape type: Box mini - IStick type

B. Data sheet

  • Maximum power: Not applicable
  • Maximum voltage: 8
  • Minimum value of resistance for a start; 0.1 Ohms
  • Length or height of the product: 79 mms
  • Product Width or Height: 40 mms
  • Weight without accumulator: 78 grams
  • Dominant material: Stainless steel

C. Packaging

  • Packaging quality: Very good
  • Presence of a notice: No

D. Qualities and use

  • Overall quality: Very good
  • Quality of rendering: Very good
  • Stability of the rendering: Exceptional
  • Ease of implementation: Very easy

E. Conclusions and comments of the Internet user author of the review

Small return after a month of daily use. Super small box which nevertheless requires good knowledge with mechanical mods, batteries and resistance assemblies compatible with this model (batteries in series, hybrid connection, i.e. the 510 of the ato is in direct contact with battery).

Clearly, it is absolutely not a box for beginners, and no need to think about it, if you do not have, or if you do not plan to acquire very very good accumulators (type VTC5 for example).

Box made for the use of a dripper, which made me appreciate this type of vape again.

Below 0,5 ohms the vape is not pleasant, too hot, but above a real pleasure, hyper reactive even with clapton style assemblies.

Very well designed, there are 6 degassing holes on the underside of the box, a small drawing on the back of the packaging box serves as an instruction manual.

Small flat, the switch is not lockable, which means that you have to loosen it for transport, in order to avoid inadvertent bad handling.

Considered dangerous by some (it has NO PROTECTION), I do not have to deplore any particular incident after a month of use, proof that if we take all the precautions that go well, all is well (tany everyday object can be dangerous if not used under suitable conditions, but this is even more true for vaping products…).

In terms of rendering: My personal advice, make an assembly equal to or greater than 0,5 ohms to have an ideal vape 🙂

Make sure you have the necessary knowledge before using this box as well as having a compatible dripper, do not forget to always take a set of batteries with the same discharge having a good amperage and remember to check that the pin of the ato exceeds the screw thread.

Note from the user author of the review: 4.5/5 4.5 5 out of stars

(c) Copyright Le Vapelier SAS 2014 - Only full reproduction of this article is authorized - Any modification of any kind is totally prohibited and infringes the rights of this copyright.

Print Friendly, PDF & Email
Com Inside Bottom
Com Inside Bottom
Com Inside Bottom
Com Inside Bottom

About the Author