Commercial characteristics
- Sponsor who has loaned the product for the magazine: Do not wish to be named.
- Price of the tested product: 35.90 Euros
- Product category according to its selling price: Mid-range (from 36 to 70 euros)
- Atomizer Type: Single Bowl Dripper
- Number of resistances allowed: 2
- Resistor Type: Rebuildable Micro coil
- Supported Bit Type: Cotton, Fiber Freaks Density 1, Fiber Freaks Density 2, Fiber Freaks Yarn 2 mms, Fiber Freaks Cotton Blend
- Quantity in milliliters announced by the manufacturer: 1
Reviewer comments on business characteristics
Among all the vaping products, Wismec is widely established as one of the market leaders, always innovative, always more powerful and that's not bad either, with a lot of originality. The brand often offers material accessible in the mid-range, for a very good design quality. We all know Reuleaux, Noisy Cricket, Presa or even Theorem, we don't know IndiaDuo or IndiaReserve ...
Today it is the RDA Neutron, a massive dripper, able to cash large powers, it can metamorphose to provide a plateau with two resistances seemingly parallel, but which in reality are in series. An innovation that only Wismec offers for the moment.
Its diameter is substantial with 25mm and an adjustable airflow. Inside the atomizer, the walls of the top-cap are equipped with a kind of “banne” which is positioned above the air-holes in order to direct the vapor.
The pin is adjustable via a screw but limited under penalty of unscrewing the positive pin.
Physical characteristics and felt quality
- Width or Diameter of the product in mms: 25
- Length or height of the product in mms as it is sold, but without its drip tip if it is present, and regardless of the length of the connection: 26
- Weight in grams of the product as sold, with its drip tip if it is present: 58
- Material constituting the product: Stainless steel
- Form Factor Type: Kayfun / Russian
- Number of component parts without screws and washers: 4
- Number of threads: 1
- Quality of the threads: Good
- Number of O-rings, Drip-Tip excluded: 3
- Quality of O-rings present: Good
- O-ring positions: Drip-Tip Connection, Top-Cap - Tank, Bottom-Cap - Tank
- Capacity in milliliters actually usable: 1
- Overall, do you appreciate the quality of manufacture of this product with regard to its price? Yes
Rating of the vapelier as to feelings quality: 4 / 5 
Reviewer's comments on physical characteristics and perceived quality
The RDA Neutron is made of stainless steel with a glossy finish that does not mark the traces. The pin is adjustable, well insulated it is also clear enough not to need to adjust and good, because the margin is thin on pain of unscrewing the positive pin.
The engravings on the atomizer are as usual the name of the designer JayBo in an apparent circle on the tank and, more discreet, the other engravings under the atomizer. Beautiful sharp and deep, they are successful.
This atomizer is supplied with a drip-top all stainless steel. It is fixed correctly on the top-cap which fits properly, thanks to the seal that ensures proper maintenance.
At the level of the airflow, on the tank we find three large circular holes of 3mm of diameter each. Thus, they ensure good air circulation and properly dissipate the heat associated with a significant material thickness that is felt in the weight of the atomizer.
The top-cap that fits over it, allows to seal if necessary, one or two holes to reduce the airflow by rotating the top-cap on the tank. It is equipped with an awning that covers the air holes like an awning, which helps direct the flow of steam.
The plate is functional thanks to the four studs each equipped with a hole to put the legs of the resistors, the gap is 8mm between the center of the two holes, which is not huge for a dripper of this type since this gap limits a bit too exotic assemblies. This tray has only one tank which is not very large, but the diameter of the tray compensates to allow a capacity of 1ml of liquid. The base is completely removable and is exposed to change the configuration of the atomizer and offers the possibility of making a double coil series without difficulty with 3 studs, we will detail this in the use section.
The tank is held on the base thanks to two joints, their function is effectively ensured.
All in all it is a good quality dripper in relation to its price, materials and machining work are good but nothing exceptional.
Functional features
- Connection type: 510
- Adjustable positive stud? Yes, through an adjustment by thread, the assembly will be flush in all cases
- Presence of air flow regulation? Yes, and variable
- Diameter in mms maximum of the air regulation possible: 18
- Minimum diameter in mms of the air regulation possible: 1
- Air regulation positioning: Lateral positioning and benefiting resistors
- Spray chamber type: Conventional / Wide
- Heat dissipation of the product: Normal
Reviewer's comments on functional features
The main function of this atomizer is its ability to produce a large amount of vapor. He is also a real chameleon who transforms his board to allow the realization, either of a parallel double coil, or a double coil in series. Personally, it is the first atomizer that I meet, which offers this.
Thanks to the large holes on the studs, it is possible to use large diameter wires to build double resistors. But the spacing of the studs somewhat limits the excessive exotic assemblies, however, the large diameter resistives such as 0,6mm, or clapton (which seems to be ideal), will be the most appropriate.
This atomizer supports large powers well beyond 80 watts with its two series of large airflows located at the level of the tank, on each side. They are adjustable and the handling to manage the air inlets is practical.
The sub-hom assemblies for power vaping generate a reasonable heating of the atomizer which dissipates heat well. However, single coil assemblies will not be possible (desirable) since the air-holes work simultaneously.
At the level of the 510 connection, the pin is adjustable by a screw which also ensures a good contact.
Drip-Tip Features
- Type of attachment of the drip-tip: Owner only
- Presence of a Drip-Tip? Yes, the vaper can immediately use the product
- Length and type of drip-tip present: Short
- Quality of the present drip-tip: Good
Reviewer's comments on the Drip-Tip
The drip-top is proprietary, all in stainless steel with a large thickness, it remains sober with a corolla at its base which fits into the top-cap. Its internal diameter of 11mm ensures a rather substantial direct inhalation.
Its base fits perfectly on the top-cap with excellent support provided by a single seal and the allure of the drip gives a nice finish to this atomizer. It is practical, beautiful, well-made and comfortable… no need to change it (we can't anyway!).
Evaluation of the packaging
- Presence of a box accompanying the product: Yes
- Would you say that the packaging is up to the price of the product? Yes
- Presence of a user manual? Yes
- Is the manual understandable for a non-English speaker? Yes
- Does the manual explain ALL features? Yes
Vapelier's note on packaging: 5 / 5 
Reviewer's comments on conditioning
What about such packaging for this mid-range product? just that it is perfect and that some manufacturers should be inspired.
It is a dripper you will say to me, there is not much to say, and despite this, Wismec provides a manual if well illustrated that it does not even need to be translated to be understood in all languages.
Not only that, but the included accessories are so complete that there is more than the liquid to put. This atomizer is delivered "ready to vape" (remember to assemble it anyway).
The accessories provided are:
- Instructions for use
- A capillary pad
- An Allen key
- A Phillips screwdriver
- A set of seals
- Two sets of two additional screws
- Two clapton type resistors
- A PEEK insulation and two pads to change configuration
Appreciations in use
- Transport facilities with the mod of the test configuration: Ok for an external jacket pocket (no deformations)
- Disassembly and cleaning facilities: Easy, even standing in the street, with a simple tissue paper
- Filling facilities: Super simple, even blind in the dark!
- Easy to change resistors: Easy but requires a workspace to lose nothing
- Is it possible to use this product throughout the day with several vials of EJuice? Yes perfectly
- Was there leak after one day of use? No
- In the event of leaks during the tests, descriptions of the situations in which they occurred:
Vapelier's note on ease of use: 4 / 5
Reviewer's comments on the use of the product
The base is demountable complement and is bare to change the configuration of the atomizer. The one that is originally provided allows parallel double coil, but Wismec innovates with interchangeable pads that propose to make identical fixtures except that this plate is found with 3 plots: a positive, a negative and a neutral. The neutral pin being completely isolated from the other parts of the atomizer, it allows to make the joint between the two resistors and thus have a series connection. The disassembly of the base is childish and easily preached to the exercise, it's like a game of Lego. Thus it is very easy to make very low value resistances to thus add their resistivity instead of dividing it.
Whatever the configuration, the editing is the same, simplicity has taken place in this Neutron and sub-ohm montages are welcome.
With a twisted double coil Clapton, the value of my resistance is 0.3Ω, with a power of 100W I have a very large production of steam, not to say huge. The atomizer is warm but easily withstands heat as well as the steam that emerges. The heat dissipation is very good.
In terms of flavor, do not expect miracles, nothing specific in the taste, we are on an acceptable limit, with liquids flavored with tobacco, vanilla, nuts or caramel, in this type of flavor you will appreciate .
On the series assembly, with a 0.5mm kanthal, I get a resistance of 0,9Ω. The steam is there and the flavor a little better, but not enough to whip a cat. However the configuration for series assemblies is to be explored, because I found the option rather not bad and interesting, it is enough to find the assembly which is perfectly suitable for this atomizer. I don't have enough time to undertake a serious comparison, with all the coils possible and imaginable, your feedback will be welcome in the comments of this review.
Recommendations for use
- With which type of mod is it advisable to use this product? Electronics AND Mechanics
- Which mod model is it recommended to use this product with? Anyone who can accept a 25mm diameter
- With which type of EJuice is it advisable to use this product? All liquids without problem
- Description of the test configuration used: Description in use
- Description of the ideal configuration with this product: There is none in particular, the 22 tubes will be a little light ...
was the product liked by the reviewer: Yes
Overall average of the Vapelier for this product: 4.3 / 5 
Link to a video review or blog maintained by the reviewer author of the review
The mood ticket of the reviewer
This Neutron amused me, I found the idea of the interchangeable plate for the double parallel coil in double coil series, quite interesting, but I think it is necessary to dig even more to test a good number of series assemblies that so far we have not exploited. Wismec offers an opportunity that is simple to implement with a fully moldable tray and I enjoyed "tinkering", it looked like a game of Lego.
Side vape, it's a real locomotive, the clouds of steam are huge with a very good heat dissipation, but beware, side flavor is not in excellence, it remains acceptable anyway choosing a flavor adequate e-liquid.
The quality is very good for the price, a good performance that is fun, with a very complete packaging and finally a beautiful and massive look.
Sylvie.I
(c) Copyright Le Vapelier SAS 2014 - Only full reproduction of this article is authorized - Any modification of any kind is totally prohibited and infringes the rights of this copyright.
