Commercial characteristics
- Sponsor having loaned the product for the magazine: MyFree-Cig
- Price of the tested product: 39.9 Euros
- Product category according to its selling price: Mid-range (from 36 to 70 euros)
- Atomizer Type: Single Bowl Dripper
- Number of resistances allowed: 4
- Resistor Type: Rebuildable Micro coil
- Supported Bit Type: Cotton, Fiber Freaks Density 1, Fiber Freaks Density 2, Fiber Freaks Yarn 2 mms, Fiber Freaks Cotton Blend
- Quantity in milliliters announced by the manufacturer: 0.8
Reviewer comments on business characteristics
If its appearance is somewhat common, don't be overly reliant on it. Nothing looks as much like a dripper as another dripper and that is not the issue. The Indestructible by Wismen is the dripper's “fighter plane”, with features that make all the difference.
Moderator Jay Bo has designed the Indestructible to accommodate mountings that support very high power with thick wires through open negative terminals.
The design of this atomizer offers great heat dissipation by airflows on the tank AND on the top cap following an innovative system of air flow passing through fins.
So be careful because this Indestructible is intended for a category of confirmed vapers and more particularly Cloud followers (big clouds). Let's see why ...
Physical characteristics and felt quality
- Width or Diameter of the product in mms: 22
- Length or height of the product in mms as it is sold, but without its drip tip if it is present, and regardless of the length of the connection: 23
- Weight in grams of the product as sold, with its drip tip if it is present: 34
- Material composing the product: Stainless steel 303 and PEEK
- Form Factor Type: Igo L / W
- Number of component parts without screws and washers: 5
- Number of threads: 3
- Quality of the threads: Good
- Number of O-rings, Dript-Tip excluded: 3
- Quality of O-rings present: Good
- O-Ring Positions: Drip-Tip Connection, Top Cap - Tank, Bottom Cap - Tank
- Capacity in milliliters actually usable: 0.8
- Overall, do you appreciate the quality of manufacture of this product with regard to its price? Yes
Rating of the vapelier as to feelings quality: 4 / 5 
Reviewer's comments on physical characteristics and perceived quality
The Indestructible is made of medium quality material. No welding has been done on this product and for good reason, the steel used is a stainless steel 303 that does not support weldability. The negative terminals have been machined in the mass, while the positive pin is an assembly. I regret the choice of this steel which is not the best for this type of product and which could, in the long term, have premature wear. A steel type "PX" (eg stainless steel 316L surgical or 304L stainless food) would have been preferable to a steel 303 type "Z" (standard AFNOR).
On the other hand for insulation it is polyetheretherketone (PEEK), a very good choice, for a remarkable thermomechanical quality reinforced by fiberglass and temperature resistance up to 400 ° without risk of deformation.
The pin is made of brass and, although it is a screw, it is not adjustable as it is essentially intended for the maintenance of the positive stud. This implies that by unscrewing it, the stability of the stud is lost.
The machining is very well done, the assembly is done perfectly and the engravings on the tank as well as under the tray, are really beautiful. The joints are a little thin but doubled at the plateau.
So a set of correct quality but which does not completely satisfy me because of the choice of this steel.
Functional features
- Connection type: 510
- Adjustable positive plot? No, a flush mount can only be guaranteed through an adjustment of the positive pad of the battery or the mod on which it will be installed
- Presence of air flow regulation? Yes, and variable
- Diameter in mms maximum of the air regulation possible: 10
- Minimum diameter in mms of the air regulation possible: 5
- Air regulation positioning: Lateral positioning and benefiting resistors
- Spray chamber type: Conventional / Wide
- Heat dissipation of the product: Excellent
Reviewer's comments on functional features
The main function of this Indestructible is to be able to dissipate a large amount of heat. Its design can accommodate very large diameter wires: at least 0.5mm. The types of assembly can be varied in double coil or quad-coil, the space on the board allowing it for the most skilful.
The negative pads have large open slots facilitating the passage of a thick wire without any manual maintenance. The positive pad has a large rectangular opening of 6mm x 2mm, leaving the housing with a thick kantal that will be held by two screws.
You'll understand, it is made to vaper mainly on powers of more than 100 Watts. For those who doubt and would like to use a finer Kanthal, in 0.3mm for example, everything is possible but I will explain the difficulty in "use".
Drip-Tip Features
- Type of attachment of the drip-tip: Owner only
- Presence of a Drip-Tip? Yes, the vaper can immediately use the product
- Length and type of drip-tip present: Short with heat evacuation function
- Quality of the present drip-tip: Good
Reviewer's comments on the Drip-Tip
Not the choice for the drip tip since it is an integral part of the top cap made of 3 different but indissociable elements.
Its opening is 10mm and its size is short with a nice design and oblique curves, which change from straight drip-tips. Its base forms a corolla, then a second, to make a fin around the interior of which there are 16 holes, to allow air to circulate when the washer or it rests, is open.
A drip tip very particular, but which remains nonetheless aesthetic.
Evaluation of the packaging
- Presence of a box accompanying the product: Yes
- Would you say that the packaging is up to the price of the product? Yes
- Presence of a user manual? No
- Is the manual understandable for a non-English speaker? No
- Does the manual explain ALL features? No
Vapelier's note on packaging: 3 / 5 
Reviewer's comments on conditioning
In a transparent plastic box of cubic shape, the Indestructible is placed in a compact foam for its protection. Light but correct packaging. In this box we also find: 4 spare screws and additional gaskets.
I regret, however, the absence of allen key diameter 1.5mm or even a small cruciform for studs screws. There is also no user manual.
Appreciations in use
- Transport facilities with mod of test configuration: Ok for an inside jacket pocket (no deformations)
- Disassembly and cleaning facilities: Easy, even standing in the street, with a simple tissue paper
- Filling facilities: Super simple, even blind in the dark!
- Easy to change resistances: Difficult, requires various manipulations
- Is it possible to use this product throughout the day with several vials of EJuice? Yes perfectly
- Was there leak after one day of use? No
- In the event of leaks during the tests, descriptions of the situations in which they occurred:
Vapelier's note on ease of use: 4.2 / 5 
Reviewer's comments on the use of the product
Like all drippers, it remains easy to use, the most delicate is the editing that you will achieve. Depending on the thickness of the wire used, these manipulations will be a real pleasure or a real ordeal.
Prefer a thick kanthal, whether it's single, double or quadruple coils, because when you insert your resistors in the space provided to maintain them, it is so wide, it becomes dangerous to block your threads. he is too thin. In addition, the large slots of the negative pads are open and do not allow to hold the end of kanthal to block in its housing.
On the other hand if you use a kanthal type clapton, no worries, manipulations will be facilitated by these large openings and the maintenance of your wire will be easier. Similarly for the quad-coil, it is possible to make only two double resistances without cutting the wire, since the housing is free to access (see photo below)
I do not know why Wismec chose two different types of fasteners for the studs, but going from an allen key on the positive terminals to a cruciform on the negative terminals is really not practical.
For the airflow, the Indestructible is a magnificent object that dissipates heat well. Even if, at 150 Watts, it heats a little on the lips, I did not feel the disturbing temperature that I could have had on others.
At the base on the tank, you have three openings in series of three 2mm holes. Thus, you can use two series on either side of the tank for the double or the quadruple coils, or a single series with an oval central hole a little larger than the others.
The top cap is very special and also allows to circulate the air by adjustable fins making the atomizer even more aerial. This top cap consists of three elements with a base of eight holes over which is placed a washer that also has eight holes that are superimposed. By rotation, the washer can block some openings or leave them completely open. Once your choice is made, it is necessary to maintain this washer and screw over the last element which is the drip tip to block all and thus form a top cap with fins more or less air.
Simple use for editing that can be complicated. This atomizer is not made to restore perfect flavors but you will have an exceptional steam and fabulous.
Recommendations for use
- With which type of mod is it advisable to use this product? Electronics AND Mechanics
- What mod model is it recommended to use this product with? a mod that can provide high power (above 60 Watts)
- With which type of EJuice is it advisable to use this product? All liquids without problem
- Description of the test configuration used: Box electro and box meca double battery in series for a dual coil 0.55Ω to 105W (kanthal 0.5mm) and for a quadricoil to 0.25Ω to 150W (Clapton)
- Description of the ideal configuration with this product: No rules, as long as you use a very thick Kanthal
was the product liked by the reviewer: Bof, it's not the craze
Overall average of the Vapelier for this product: 3.6 / 5 
Link to a video review or blog maintained by the reviewer author of the review
The mood ticket of the reviewer
The Indestructible is a marvel for those who love very big vapors. It is intended for phenomenal vape powers and strong resistive. With a fine wire, it can be nightmarish at the level of the realization of the assembly.
As for the flavors, I did not find them great. They remain average, but let's be frank, with such powers, the liquid loses its appeal taste, to make room for exceptionally dense vapors.
Its quality is average but the insulation remains an essential asset, it is in a range of correct prices but provide a key Allen 1.5 because it is not provided.
Note: this product is perfectly suitable for the Noisy Cricket mechanical box, with two batteries in series for optimal power, also manufactured by Wismec.
Sylvie.I
(c) Copyright Le Vapelier SAS 2014 - Only full reproduction of this article is authorized - Any modification of any kind is totally prohibited and infringes the rights of this copyright.
