Commercial characteristics
- Sponsor who lent the product for the review: Le Petit Vapoteur
- Price of the tested product: 36.90 Euros
- Product category according to its selling price: Mid-range (from 36 to 70 euros)
- Atomizer type: Classic rebuildable
- Number of resistances allowed: 2
- Resistor Type: Classic Reconstructible, Rebuildable Micro Coil
- Type of wicks supported: Silica, Cotton, Ekowool
- Quantity in milliliters announced by the manufacturer: 4.5
Reviewer comments on business characteristics
An atomizer of very good quality offering double coil, an easy assembly to achieve by dedicating an individual fixation for each end of the resistors.
Physical characteristics and felt quality
- Width or Diameter of the product in mms: 22
- Length or height of the product in mms as it is sold, but without its drip tip if it is present, and regardless of the length of the connection: 51
- Weight in grams of the product as sold, with its drip tip if it is present: 74
- Material composing the product: Stainless steel, Pyrex
- Form Factor Type: Kayfun / Russian
- Number of component parts without screws and washers: 8
- Number of threads: 10
- Quality of the threads: Excellent
- Number of O-rings, Dript-Tip excluded: 5
- Quality of O-rings present: Good
- O-Ring Positions: Drip-Tip Connection, Top Cap - Tank, Bottom Cap - Tank
- Capacity in milliliters actually usable: 4.2
- Overall, do you appreciate the quality of manufacture of this product with regard to its price? Yes
Rating of the vapelier as to feelings quality: 4.9 / 5 
Reviewer's comments on physical characteristics and perceived quality
A look open, airy, a beautiful silhouette.
The air flow ring is well maintained and a system of notches allows it to be fixed when the choice of the opening diameter is made.
Functional features
- Connection type: 510
- Adjustable positive stud? Yes, through an adjustment by thread, the assembly will be flush in all cases
- Presence of air flow regulation? Yes, and variable
- Diameter in mms maximum of the air regulation possible: 4
- Minimum diameter in mms of the air regulation possible: 1
- Positioning of the air regulation: From below and benefiting the resistances
- Atomization chamber type: Bell type
- Heat dissipation of the product: Normal
Reviewer's comments on functional features
A good restitution of flavors, a rather dense vape in subohm and an air regulation, which even limited to 4mm, remains sufficiently airy for an atomizer of this type.
Drip-Tip Features
- Drip tip type: 510 Only
- Presence of a Drip-Tip? Yes, the vaper can immediately use the product
- Length and type of drip-tip present: Long
- Quality of the present drip-tip: Good
Reviewer's comments on the Drip-Tip
A very nice drip tip with a metal base and a pyrex body, the set measures 25mm without the attachment, with an outside diameter of 12mm and an inside of 4mm on the base.
A great effort has been made to provide such a nice drip tip, it should be noted.
Evaluation of the packaging
- Presence of a box accompanying the product: Yes
- Would you say that the packaging is up to the price of the product? Yes
- Presence of a user manual? No
- Is the manual understandable for a non-English speaker? No
- Does the manual explain ALL features? No
Vapelier's note on packaging: 3 / 5 
Reviewer's comments on conditioning
The cardboard box that comes with the product is strong enough to protect it and remains suitable for this range.
A notice with some precaution such as “shut off the air flow before filling”, would not be superfluous (try to find out what happens if not… but stand above a sink, I warned you).
Appreciations in use
- Transport facilities with the mod of the test configuration: Nothing helps, requires a shoulder bag
- Disassembly and cleaning facilities: Easy but requires a workspace
- Filling facilities: Easy, even standing in the street
- Easy to change resistors: Easy but requires a workspace to lose nothing
- Is it possible to use this product throughout the day with several vials of EJuice? Yes perfectly
- Was there leak after one day of use? No
- In the event of leaks during tests, descriptions of the situations in which they occur
Vapelier's note on ease of use: 3.1 / 5 
Reviewer's comments on the use of the product
A whole day to vape with this atomizer, it stands relatively well.
For filling, the seal serving as a stopper is a bit of a nuisance to lift.
The four studs dedicated to fixing the resistors are appreciable.
Although I did not notice any leakage during its use, 2-3 drops in the air flow, always bead after filling.
The ignition is done very quickly from the first aspirations, then nothing ... the atomizer becomes as waterproof as a war submarine.
Recommendations for use
- With which type of mod is it advisable to use this product? Electronics AND Mechanics
- Which mod model is it recommended to use this product with? Any electronic or mechanical mod
- With which type of EJuice is it advisable to use this product? All liquids without problem
- Description of the test configuration used: Fogger V6 with a box DNA30 and Fogger V6 with the mech Némesis
- Description of the ideal configuration with this product: A box configuration or a mod in SS (electro or mechanic) would marry well with this atomizer
was the product liked by the reviewer: Yes
Overall average of the Vapelier for this product: 4.3 / 5 
Link to a video review or blog maintained by the reviewer author of the review
The mood ticket of the reviewer
This atomizer with a good restitution of flavors, offers a more suitable vape as well as a more airy look than its predecessors.
I regret the absence of instructions which do not indicate where one should place the end of its wicks once inserted into the resistance.
Indeed the 4 cavities are wide and suggest that the cottons can easily be lodged there without being compressed and therefore without risk of dry hit in the event of sub-ohming.
So I tested this configuration with a resistance of 0.3 ohm.
I then gradually increased my power to 30 watts, which was the limit reached with a very light dry hit.
On the other hand by placing the ends of the wick on the plate, in front of the cavities and with an eiquide in 50 / 50, even with 30 watts it was perfect!
Conversely, on a resistance of 1.5 ohm at 30 watts, I did not feel anything particular when the wicks are in the cavities, but if they rest on the plate, I feel a slight clogging, but without leakage.
For filling it is imperative to close the airflow and despite this I noticed a very small leak (3 drops) inevitable. However after two / three aspirations the priming is done.
The Fogger V6 remains a beautiful atomizer, very effective, in a price range quite correct.
The rendering is pleasant without feeling excessive heat to 0.3 ohm!
This atomizer was maintained all day without gurgling, without leakage, and without Dry hit on resistance values between 0.5 and 1.1 ohms whatever the configuration of the wicks (on the plate or in the cavities), with a 22 watts of power.
Pretty good not?
Looking forward to reading you.
Sylvie.i
(c) Copyright Le Vapelier SAS 2014 - Only full reproduction of this article is authorized - Any modification of any kind is totally prohibited and infringes the rights of this copyright.
