Commercial characteristics
- Sponsor who lent the product for the review: Le Petit Vapoteur (http://www.lepetitvapoteur.com/)
- Price of the tested product: 51.90 Euros
- Product category according to its selling price: Mid-range (from 36 to 70 euros)
- Atomizer type: Classic rebuildable
- Number of resistances allowed: 1
- Resistor Type: Classic Reconstructible, Rebuildable Micro Coil
- Type of wicks supported: Silica, Cotton, Ekowool
- Quantity in milliliters announced by the manufacturer: 4.5
Reviewer comments on business characteristics
Very elegant and with a clean design, The Expromizer is an imposing atomizer with its 23mms which looks like Taifun from the outside but which above all matches the Kayfun from the inside.
An original mix that is based on sure values.
Physical characteristics and felt quality
- Width or Diameter of the product in mms: 23
- Length or height of the product in mms as it is sold, but without its drip tip if it is present, and regardless of the length of the connection: 57
- Weight in grams of the product as sold, with its drip tip if it is present: 70
- Material constituting the product: Stainless steel, PMMA
- Form Factor Type: Kayfun / Russian
- Number of component parts without screws and washers: 10
- Number of threads: 3
- Quality of the threads: Very good
- Number of O-rings, Dript-Tip excluded: 3
- Quality of O-rings present: Good
- O-ring positions: Drip-Tip Connection, Top Cap - Tank, Bottom Cap - Tank, Other
- Capacity in milliliters actually usable: 4.2
- Overall, do you appreciate the quality of manufacture of this product with regard to its price? Yes
Rating of the vapelier as to feelings quality: 3.8 / 5 
Reviewer's comments on physical characteristics and perceived quality
I did not count the drip tip in the number of parts. However, I added the pine and its copper spring.
The quality of each piece seems irreproachable, with a real pleasure with its threads that slide smoothly. Bravo!
The whole seems robust and well designed.
The announced capacity of 4,5 ml is hardly optimistic compared to the 4,2 ml that I was able to put in it
Functional features
- Connection type: 510
- Adjustable positive stud? Yes, through a spring, the assembly will be flush in all cases
- Presence of air flow regulation? Yes, and variable
- Diameter in mms maximum of the air regulation possible: 2
- Minimum diameter in mms of the air regulation possible: 1
- Positioning of the air regulation: From below and benefiting the resistances
- Spray chamber type: Chimney type
- Heat dissipation of the product: Normal
Reviewer's comments on functional features
The realization of editing is extremely simple.
A simple coil on a ventilated base with an opening in its center to have an airflow under the resistance allows you to restore good flavors. The heat dissipation is done relatively well to allow yourself to make a resistance of 0,7 ohm without having any feeling of too hot vape. Nevertheless, it is necessary to avoid executing too low resistances because the insulator which is under the pad of the positive pole would not support it and could melt.
The spring loaded pin allows flush mounting on any support. In addition, it is housed in a kind of tank under the base which allows you to recover the excess liquid and thus avoid clogging when you vape. So this is a place that should not be overlooked for regular cleaning.
In short, the Expromizer is a very functional, simple and practical atomizer.
Drip-Tip Features
- Drip tip type: 510 Only
- Presence of a Drip-Tip? Yes, the vaper can immediately use the product
- Length and type of drip-tip present: Medium
- Quality of the present drip-tip: Good
Reviewer's comments on the Drip-Tip
Nothing special to say about the drip tip, which is pleasant in the mouth and has a shape that perfectly matches the look of the atomizer.
Evaluation of the packaging
- Presence of a box accompanying the product: Yes
- Would you say that the packaging is up to the price of the product? Yes
- Presence of a user manual? Yes
- Is the manual understandable for a non-English speaker? No
- Does the manual explain ALL features? Yes
Vapelier's note on packaging: 4 / 5 
Reviewer's comments on conditioning
In this price range, the packaging is quite correct.
The box is solid, the contents include screws and spare gaskets with a small screwdriver.
Finally an atomizer with a nice explanatory note, but here it is…. it is only in English.
Appreciations in use
- Transport facilities with mod of test configuration: Ok for an inside jacket pocket (no deformations)
- Disassembly and cleaning facilities: Easy but requires a workspace
- Filling facilities: Easy, even standing in the street
- Easy to change resistors: Easy but requires a workspace to lose nothing
- Is it possible to use this product throughout the day with several vials of EJuice? Yes perfectly
- Was there leak after one day of use? No
- In the event of leaks during tests, descriptions of the situations in which they occurred
Vapelier's note on ease of use: 4 / 5
Reviewer's comments on the use of the product
For daily use, the Expromizer remains a comfortable companion with very suitable flavors that remains in normal temperatures with resistances of values greater than the ohm.
Its airflow suits me for a normal inhalation but for those who vapor very aerial, it remains a bit fair.
The spring-mounted copper pin is a good success, which will match the atomizer with all mods while maintaining perfect grip contact.
The filling is so practical that I happened to fill the tank with the bottle…. It's cool, is not it!
Recommendations for use
- What type of mod is it advisable to use this product with? Electronic AND Mechanical
- With which mod model is it advisable to use this product? a mechanical or electronic mod 23mm in diameter
- With which type of EJuice is it advisable to use this product? All liquids without problem
- Description of the test configuration used: 5 turns on an 3mm support with a Kanthal 28 gauges, for a resistance of 0,8 ohm
- Description of the ideal configuration with this product: There is not really an ideal configuration, but on a 23mm diameter mod
was the product liked by the reviewer: Yes
Overall average of the Vapelier for this product: 4.3 / 5 
Link to a video review or blog maintained by the reviewer author of the review
The mood ticket of the reviewer
The Expromizer is a very good atomizer that correctly restores the flavors and that without any gurgling.
It works perfectly well for a comfort vape between 1 and 1,8 ohms. The more daring can go down to 0,7 ohm but not below because the insulator of the positive pad would not support it. Moreover, at this value, the airflow will turn out to be too narrow and the air necessary for a resistance below the ohm will be insufficient.
The spring loaded pin is very effective on all mods (or boxes), no other adjustment will be necessary for this. A wise system that other designers should learn from. In these prices, it is rare to find such a good product, I am delighted.
Looking forward to reading you.
Sylvie.i
(c) Copyright Le Vapelier SAS 2014 - Only full reproduction of this article is authorized - Any modification of any kind is totally prohibited and infringes the rights of this copyright.
