Commercial characteristics
- [/ if] Price of the tested product: 49.90 Euros
- Product category according to its selling price: Mid-range (from 36 to 70 euros)
- Atomizer type: Classic rebuildable
- Number of resistances allowed: 1
- Resistor Type: Classic Reconstructible, Rebuildable Micro Coil
- Type of wicks supported: Silica, Cotton, Ekowool
- Quantity in milliliters announced by the manufacturer: 4.5
Reviewer comments on business characteristics
Here is an ato cheap and powerful! the price is below the actual performance of the proposed equipment.
Which is not a bad thing, quite the contrary.
Physical characteristics and felt quality
- Width or Diameter of the product in mms: 23
- Length or height of the product in mms as it is sold, but without its drip tip if it is present, and regardless of the length of the connection: 54
- Weight in grams of the product as sold, with its drip tip if it is present: 76.9
- Material composing the product: Stanless Steel grade 304
- Form Factor Type: Kayfun / Russian
- Number of component parts without screws and washers: 11
- Number of threads: 6
- Quality of the threads: Excellent
- Number of O-rings, Dript-Tip excluded: 2
- Quality of O-rings present: Good
- O-Ring Positions: Drip-Tip Connection, Top Cap - Tank, Bottom Cap - Tank
- Capacity in milliliters actually usable: 4.5
- Overall, do you appreciate the quality of manufacture of this product with regard to its price? Yes
Rating of the vapelier as to feelings quality: 5 / 5 
Reviewer's comments on physical characteristics and perceived quality
The EXpromizer is a well designed and super well machined ato.
No worries about recalcitrant threads or which “scrunch”, everything is smooth and screwed correctly.
Despite the number of important parts that compose it, it is easy to disassemble and reassemble.
A number of spares are provided (gaskets, screws etc ...), which is practical in case of damage with those originally fitted on the ato
Functional features
- Connection type: 510
- Adjustable positive stud? Yes, through a spring, the assembly will be flush in all cases
- Presence of air flow regulation? Yes, and variable
- Diameter in mms maximum of the air regulation possible: 2
- Minimum diameter in mms of the air regulation possible: 0.9
- Positioning of the air regulation: From below and benefiting the resistances
- Atomization chamber type: Bell type
- {Heat dissipation of the product: Excellent
Reviewer's comments on functional features
The spring system of the 510 pin is a real treat! This ato is flush in connection with any mod, just that it is a real pleasure and a real satisfaction!
The air flow adjustable via the ring with notch can be quite practical but in fact it is rather well to adjust and it especially avoids a deregulation of the airflow.
The air-holes, 4 in number, are of course of different diameters, which allows you to find the vape that suits you according to the liquid and the assembly used.
Drip-Tip Features
- Drip tip type: 510 Only
- Presence of a Drip-Tip? Yes, the vaper can immediately use the product
- Length and type of drip-tip present: Medium
- Quality of the drip-tip present: Very good
Reviewer's comments on the Drip-Tip
The drip-tip has a worked shape below the part that is taken in the mouth.
the design is rather classic, but does its job in terms of functionality.
The main hole of 5mm at the top and 4mm at the bottom ensures good airflow.
Evaluation of the packaging
- Presence of a box accompanying the product: Yes
- Would you say that the packaging is up to the price of the product? Yes
- Presence of a user manual? Yes
- Is the manual understandable for a non-English speaker? Yes
- Does the manual explain ALL features? Yes
Vapelier's note on packaging: 5 / 5
Reviewer's comments on conditioning
A packaging containing a mod of employment for una to, it is rare! So when it's done well, it must be emphasized!
Available only in English and German, the illustrations are sufficient to explain the assembly as well as the settings and filling.
An exploded view of the ato is also present to indicate the direction of the parts during reassembly if necessary.
The box is well made and the ato is well protected by a preformed foam.
Appreciations in use
- Transport facilities with the mod of the test configuration: Ok for a side pocket of Jean (no discomfort)
- Disassembly and cleaning facilities: Easy, even standing in the street, with a simple tissue paper
- Filling facilities: Easy, even standing in the street
- Easy to change resistors: Easy but requires a workspace to lose nothing
- Is it possible to use this product throughout the day with several vials of EJuice? Yes perfectly
- Was there leak after one day of use? No
- In the event of leaks during tests, descriptions of the situations in which they occurred
Vapelier's note on ease of use: 4.4 / 5 
Reviewer's comments on the use of the product
Really the EXpromizer is a super simple everyday ato and has the merit of combining two technologies… Kayfun type assembly, and taifun GT type liquid filling.
What more!
The maintenance is easier and therefore does not require any emptying of the ato for the replacement of the wick or the coil!
two known technology mixers to have this result! Thank you EXvape!
Recommendations for use
- With which type of mod is it advisable to use this product? Electronics AND Mechanics
- Which mod model is it recommended to use this product with? Meca or electro, it will depend on your preference and your coil.
- With which type of EJuice is it advisable to use this product? All liquids without problem
- Description of the test configuration used: coil 1.7 ohm with kanthal 0.25 wrap on 2mm in diameter, boxmod IPV2 13 watts
- Description of the ideal configuration with this product: all 23mm mod will necessarily be flush in diameter, a provari or a mod from Taifun will be the best choice.
was the product liked by the reviewer: Yes
Overall average of the Vapelier for this product: 4.9 / 5 
Link to a video review or blog maintained by the reviewer author of the review
The mood ticket of the reviewer
In terms of price you have an ato that has very high performance!
The EXpromizer is an ato easy to assemble, to fill and which will satisfy most beginners in reconstructable but also those initiated to this kind of vape!
Tested with liquids mainly in VPG50, I also vaper and made conclusive tests with liquids in VG80 / PG20.
It will however be necessary to take care to put a sufficient quantity of cotton to avoid any “gurgling”. In fact, the “irrigation channels” leading the liquid to the wick are quite brushed and require a good dose of cotton or fiber.
This, there we can say that the price argument of an ato no longer holds up to have a big vape and of good quality in RBA.
(c) Copyright Le Vapelier SAS 2014 - Only full reproduction of this article is authorized - Any modification of any kind is totally prohibited and infringes the rights of this copyright.
