Zephyrus by Youde [Flash Test]

A. Commercial specifications

• PRODUCT NAME: Zephyrus
• BRAND: Youde
• PRICE: 37.9
• CATEGORY: Fiber atomizer
• RESISTANCE: Double coil rebuildable

B. Data sheet

• WIDTH OR DIAMETER OF THE PRODUCT: 22
• ATOMIZER HEIGHT: 45
• WEIGHT: 53
• DOMINANT MATERIAL: Stanless Steel Grade 304
• CONNECTION TYPE: 510
• AIRFLOW: Variable from tight to overhead
• SETTING THE CONNECTION: Fixed

C. Packaging

• Packaging quality: Correct
• Presence of a notice: Yes

D. Qualities and use

• Overall quality: Very good
• Quality of rendering: Very good
• Stability of the rendering: Exceptional
• Ease of implementation: Medium

E. Conclusions and comments of the Internet user author of the review

First of all, the packaging: the minimum. A plastic box with a description of the parts on the back of the box.
The content is already better: the clero, a resistance at 0.3 ohm, an RBA dual coil plate, a spare pirex, the drip tip, two sets of colored seals for the ato sound tuner (red and blue, the transparencies are mounted), an additional seal for the airflow ring and one for the filling part and the drip tip enhancer which we will talk about later.
The threads are well machined, it does not stuck, it does not squeak, at all good. By cons, no khantal, cotton or even screwdriver blue (WFT ??? No blue screwdriver?)
I remove the resistance to put the rba plate and I start my assembly. So dual coil requires. Well that has never been my strong point, I always have one resistance that heats up more than the other. There no worries, everything reddened as it should. So assembly a little more complicated than a single but simple anyway (Be careful that your resistance does not touch the bell, avoid the khantal in 0.5 or the resistors in 2.5mm). I put on my puff, put the bell back on and put the cotton in the back near the juice inlet. I imbibe all these little people and install the pyrex. Let's go for the filling. You have to remove the small seal that blocks the two holes and you fill it (needle bottle, pipette, classic bottle no filling worries). I pour in 5ml of the juice chosen for the test (a DIY in case of a leak, I don't want to pour my Gran Reserve on the table). I put the seal back on the holes, I open the airflow wide (previously closed for prevention) and let's go.
So already it does not leak, a good point.
Vap level, with resistance of equal value, I would say that it is like the subtank: a beautiful white vapor in more than sufficient quantity.
Flavor level, a bit higher than the subtank although I could not explain it: the dual coil, the drip tip striated inside, I do not know. Still, I find the flavors better than on the subtank.
The airflow, those who did not like the subtank because it is too airy for them can go their way. Compare to the Zephyrus, the airflow of the Subtank would almost pass for a tight draw… The airflow is so open that we can see through the holes. The ring is adjustable for a more or less tight rendering but still remains airy.
The Drip Tip is very successful, unlike that of Kanger's competitor. It does not heat up even if you push the watts. The riser allows to cool the vap and in addition adds a good little more to the general design.
You will understand that I am delighted by the Zephyrus.

Most :
Relatively simple editing despite the dual coil
Airflow worthy of a dripper
Restitution of flavors
Abundant steam

The least:
The dual coil implies a consumption worthy of uncle Roger at family celebrations.
No access to editing if the ato is full.

Note from the user author of the review: 4.88/5

(c) Copyright Le Vapelier SAS 2014 - Only full reproduction of this article is authorized - Any modification of any kind is totally prohibited and infringes the rights of this copyright.