Subtank Mini

By kangerTech

This product was loaned by our sponsor Vap Experience

(http://www.vapexperience.com/)

Its price is 34, 90 Euros.

When you receive this product, this is what you will find:

An atomizer that has nothing mini, both in the size without drip tip, of 48 mm, as in its capacity with a sublime vape thanks to its resistance of 0.5Ω.

Yes it's Subohm!

Only its handling is mini. Whether it is for filling, for changing the resistive head or even the simplicity of making the resistance on the mini RBA basis.

First of all, I wanted to measure the resistance mounted on the RBA base and the resistive heads supplied.

Perfectly ! The values announced are identical to those I measure.

To change the head, simply unscrew the base of the atomizer and lift the tank.

We notice the diameter of the chimney which is rather large: 5mm

The RBA head is motto of the base, very easily to change by an OCC head

The pitch is the same, no superfluous manipulations.

I tested the OCC head with a resistance of 0.5 Ω:

At 12watts I already have a nice flavor and a dense vapor. Only downside is that I vape with a very tight airflow, so my steam is rather warm with a minimum airflow adjustment.

I increase the watts, I put on 20 watts, a slightly warmer and thicker steam.

At 30 Watts, I found my e-liquid a little hot but by opening the airflow, the temperature went down, the vapor became even thicker and the flavors are much better with a wide open ventilation.

For those who like the sub-ohm, it is therefore necessary to open the ventilation in large.

The result was a little the same in a lesser proportion with OCC resistance of 1.2 Ω

For those who prefer the reasonable with a beautiful vape, depending on preference, vape-tight / vape-aerated, between 8 and 23 watts, you will find your happiness without bothering to redo your coil.

aeration

A very wide choice is offered with three possible positions, however, we can also ride a hole if we want to adjust more closely to his desire.

This change is made by a ring which slides very easily and is fixed by a small "click" that is heard with each movement. So no risk for this ring to move on its own.

Our RBA base

To change the resistance simply unscrew the cap of the head RBA, then unscrew the retaining ring to access the tray with the poles.

It is very easy to work on this atomizer, because even if the diameter remains almost common, the space under the resistance is important.

So I built my resistance, with a 0.3mm stainless wire on a diameter of 0.2mm.

I made 6 turns to get a resistance of 0.7 ohm.

At 10 watts I already have a fabulous result!

I would have thought that the feeling would be identical to that of the OCC in 0.5 Ω.

But I was pleasantly surprised to have a vape less hot than the OCC and so much more pleasant in flavor.

Filling

Just turn the tank over and pour the 4ml of liquid into the tank up to the level of the chimney. Then screw the base of your atomizer upside down. The filling is done!

So you will understand, no need to empty the liquid from your atomizer to change your coils. Convenient !

This atomizer is a marvel, very successful, we find “ready-made”, reconstructable, aerial, tight vape, flavors and dense vapor.

A good capacity up to 4.5ml and a standard diameter for the atomizer of 22mm.

Yes ! A minimum of handling for a maximum of capacity.