I-Kraken yi-Vicous Ant

 Le mveliso yayibolekwe ngu: MyFreecig (http://www.myfree-cig.com/modeurs/by-vicious-ant/kraken-atomiseur-brass.html)

I-Kraken yi-atomizer ephezulu enexabiso le-euro eyi-139,90. Luhlobo lwe-atomizer "yeGenesis" evumela ukuba iindibano zenziwe nge-resistors enye okanye ezimbini. Sifumana inombolo yayo yothotho kwi-axis esembindini yeatomizer.

I-Kraken inobubanzi be-22mm, ubude bayo bu-44mm ngaphandle kwe-drip tip kwaye ngaphandle koxhumano lwe-510. Ngakolunye uhlangothi, lenza ubunzima bayo, ekubeni isikali sam sibonisa i-72 gr.

Yenziwe nge-304 yensimbi engenasici kwaye itanki yayo yenziwe nge-Quartz enomthamo osebenzayo we-2.5 ml.

Ngokubanzi ndiyifumene iqinile kwaye isemgangathweni olungileyo, nangona kunjalo ngexabiso layo, ndiyazisola ngokuba akukho ngcebiso yokuthontsiza enikiweyo.

I-Pin ayilungiseki

Kwelinye icala, sinokuhamba komoya okusebenzayo ngaphezulu kwe-atomizer ehambelana negumbi elincitshisiweyo.

Oku kuhamba komoya kulungelelaniswa ngokujikeleza ikepusi ephezulu kwitanki.

Itanki ixhotyiswe ngee-cyclops ezimbini ezithe tye kwicala ngalinye letanki, zilungisiwe kwaye zilinganisa i-3mm ubude nge-1.5mm ububanzi. Uhlengahlengiso lwenziwa ngokujikeleza kwe-cap top efakwe kule tanki kwaye inokuvulwa kwe-triangular. Xa izivulo ezimbini zibekwe phezulu, zivumela umoya ongaphezulu okanye ongaphantsi (jonga umzobo ongentla).

Eyokupakishwa:

Sifumana imveliso kwibhokisi yekhadibhodi encinci, ilula kakhulu malunga nexabiso layo.

 Iza ne:

• 2 Iintambo zentsimbi zendibano yentsimbi yeGenesis + sheath
• Iqhekeza eli-1 leMesh lendibano yeGenesis Mesh
• 1 Isitshixo seAllen sezikrufu (izikrufu ezi-2 zifakwe kwiatomizer) ezivala umngxuma ongasetyenziswanga wendibano yekhoyili enye.

Kodwa akukho ncwadana yomsebenzisi.

Nangona kunjalo le atomizer inamathuba amaninzi ngendibano enye okanye kabini yekhoyili, kunye neendibano. 

KwiCable,

Kwi-cotton wick, i-silica, okanye enye

Umnatha

Ndivavanye iindibano ezintathu ngocingo oluchasayo kwiKanthal yobukhulu obuyi-0.3mm (0.25mm yendibano yeMesh)

Ukuqonda, ndasebenzisa intambo ye-2mm, i-silica sheath ye-2mm kunye ne-Kanthal A1 enobubanzi be-0.3mm. Ndenze ukujika kwe-5,5 kwixabiso elipheleleyo lokumelana ne-1.2ohms.

A- Siqala ukulinganisa ubude bentambo esiyifunayo

B- Siyinqumle ikhebula ngokusebenzisa iipliers ezifanelekileyo, ukungaphumeleli oko, ndisebenzisa i-vice pliers (ukuthintela ikhebula ukuba lingabikho) kunye nokusika iipliers.

Emva koko ndijonge ukuba isiphelo esisikiweyo sibukhulu obufanelekileyo

C- (1) Ndifake isiqingatha sentambo, i-silica sheath ngaphandle kokuyisika.

     (2) Ndiyakwenza ukuxhathisa kwam

     (3) Ndisike isingxobo sam ndishiya umda olungileyo

     4

D- Ndibeka intambo yam kumngxuma weatomizer

     Ndisike isheath yam ngentambo

     Ndiqala ukulungisa imilenze yokuchasana kwam kwiipads ezintle kunye nezingalunganga ngokwenza "S", kwaye ndiqinisa izikhonkwane zam.

     Ekugqibeleni, ndayisika iKanthal engaphezulu kwimilenze yokuxhathisa kwam.

E- Kancinci ndiqala "ukubetha" ukulungisa ukuxhathisa kwam, ukususa iindawo ezishushu kunye nokulinganisa iikhoyili.

Ndiplaga umngxuma ongasetyenziswanga, ngokukrukra usebenzisa isitshixo sam sika-Allen, isikrufu sinikiwe

Ndithambisa isingxobo sam nge-e-liquid yam

Ndivavanya isakhiwo sam...

F-Yonke into iyasebenza, ndigcwalisa itanki yam kwaye iatomizer yam ilungele ukusebenza

Indibano yekhoyili enye kunye nentambo yomqhaphu

Nge-Kanthal A1 yobubanzi be-0.3, kwi-3mm inkxaso, ndenze i-7,5 ijika.

Ukusebenzisa iipliers, ndiqinisa iikhoyili kwaye nditshisa i-Kanthal yam nge-blowtorch ukuze ndiqinise kwaye ndisuse i-elasticity. Ngaloo ndlela ukuxhathisa kugcina i-homogeneous enhle kunye ne-compact shape.

Ukugcina inkxaso yam (i-screwdriver diameter 3mm) ndibeka ukuchasana kwam kwi-plate kwaye ndilungisa imilenze yayo.

Ndinqumle i-surplus ye-Kanthal kwaye ndisusa i-screwdriver eyayisetyenziswa njengenkxaso.

Ndibetha kwaye ndisebenzisa iipliers, ndihlengahlengisa indibano yam.

Ndibeka intambo yam yomqhaphu

Ndithambisa intambo yam kwaye ndibeke iTanki yam.

Ukuzalisa itanki kulula kakhulu

Ndivavanya ngokutshintshela ukuseta kwam, ndifumana ixabiso lokumelana ne-1.4 ohm kunye nomphunga ogqwesileyo!

Umnatha indibano yekhoyili ezimbini

Kwindibano yam yeMesh, ndisebenzise iziqwenga ezibini zeMesh yobungakanani be325, kunye neKantal yobukhulu be-0.25.

Ukuqengqeleka le mesh kwimilo ye "cigar", ndasebenzisa iinaliti ezimbini ze-1.2mm ububanzi.

Khangela ukuba isakhelo seMesh yakho sikwicala elithe nkqo le-capillarity.

Ngaphambi kokuqengqeleka iMesh yam, ndiyigqithisa ngokupheleleyo ngeblowtorch, ukwenzela i-oxidation, kodwa nokubamba ngcono xa ndiyiqengqeleka.

Ndiqengqa iqhekeza lam lokuqala kwinaliti kwicala le-weft.

Ndenza okufanayo nakwiqhekeza lesibini kwaye ke ndifumana "iiciga" ezimbini ezingenanto.

Ndenza ukuxhathisa kwam kwiMesh ukugcina inaliti yam yenkxaso kunye nokunqanda ukuqinisa iMesh yam.

Kukho ezinye iindlela zokusebenza kuba ngokucacileyo, ezi zinokuxhonywa ngokuthe ngqo kwipleyiti yeatomizer.

Ngaphambi kokuba ndiyifake kwi-atomizer, ndidlula yonke into nge-blowtorch kwaye ndihlengahlengisa ngokulinganayo ukujika kwam.

Ndibeka ukuchasana kwam kwipleyiti ngokwenza "S" phambi kokulungisa imilenze yam.

Ndibetha (Tshintsha) amaxesha amaninzi ukulinganisa yonke kwaye ndisuse iindawo ezishushu.

Ke, ndifumana ukuxhathisa kwe-0.6 ohm.

Amagqabantshintshi malunga neKraken kwiintaba ezahlukeneyo

I-Kraken yi-atomizer ene-conductivity egqwesileyo kwaye yenzelwe i-subohm. Ngokuhamba komoya wayo ovulekileyo, iyakuvuyisa abalandeli bamafu amakhulu.

kunjalo, indibano yeKanthal/umqhaphu, ifuna i-capillarity enhle kakhulu ye-wick ekungafuneki, ngaphezu kwayo yonke into, ipakishwe. Ngenxa yokuba ubude be-wick kunye ne-conductivity yale atomizer yenza ukuba ibe ngumthengi omkhulu wejusi kunye nomphunga obunzima kunye nokubetha okulungileyo.

Ngaloo ndlela, iphunyezwe kakubi, le ndibano izibonakalisa kuninzi lwee-Dry hits, malunga neencasa, ziyi-avareji.

 galela iindibano zentambo kunye ne-mesh, ayinakuphikiswa, yiyo loo nto le atomizer yenziwe, ngokubetha okulungileyo, umphunga ogqwesileyo kunye neencasa ezingcono kakhulu kunentambo.

Ukutshatyalaliswa kobushushu kwenziwa ngokuchanekileyo kwaye ukuhamba komoya kuvuleke ngokubanzi, kuya kukuvumela ukuba uvape kwi-subohm.

Khange ndifumane mahluko uphawuleka phakathi kwezi ndibano zimbini, kodwa leyo inentambo iba mdaka ngokukhawuleza kunaleyo ineMesh, oya kuyigcina ixesha elide.

USylvie.i