Ukuguqulwa kwe-MT-RTA yi-Unicig

Iimpawu zorhwebo

• Umxhasi oboleke imveliso ukuze ihlolwe: Kumulus vape, (imveliso efikelelekayo Ici)
• Ixabiso lemveliso evavanyiweyo: 35.9 Euros
• Udidi lwemveliso ngokwexabiso layo lokuthengisa: Inqanaba lokungena (ukusuka kwi-1 ukuya kwi-35 euros)
• Uhlobo lweAtomizer: Ukwakhiwa kwakhona kweClassic
• Inani lezinto ezixhathisayo ezivumelekileyo: 2
• Uhlobo lwezinto ezixhathisayo: I-classic eyakhiwe ngokutsha, i-Microcoil ephinda yakhiwe, ulawulo lobushushu olunokwakhiwa ngokutsha, i-Microcoil yokulawula ubushushu.
• Uhlobo lwee-wicks ezixhasiweyo: Umqhaphu, uxinano lweFiber Freaks 1,IFiber Freaks density 2, iFiber Freaks 2 mm umsonto, iFiber Freaks Cotton Blend
• Umthamo kwiimililitha ezichazwe ngumenzi: 5

Amagqabantshintshi avela kumhlalutyi kwiimpawu zorhwebo

Umenzi waseTshayina u-Unicig ube ngumvelisi obalaseleyo wesixhobo sevape esaziwayo kunye nentsha ukusukela ngo-2012 kunye nekhithi ye-eSmart Starter, kodwa ngokungathandabuzekiyo yi-Mutation X dripper yayo (iinguqulelo ezingaphezu kwezine ezikhutshiweyo) kunye ne-meca mod ezinikeleyo eqhubele phambili uphawu inqanaba lamagama amakhulu akhoyo.

Namhlanje sivavanya i-atomizer yetanki enokuphinda yakhiwe kwisizukulwana samva nje (RTA), onokuthi ngayo uthathele ingqalelo i-sub-ohm vape kwaye uya kuyigcwalisa ngokulula. Kukho abantu abaninzi kule niche kwaye i-Indulgence MT-RTA ayifumaneki ngenkqubo yokumelana nobunikazi, kuphela ipleyiti yendibano eya kufuna ulwazi oluthile lo mkhuba othile.

Ixabiso layo liyibeka kwinqanaba eliphezulu le-atomizers yokungena, iyathandeka kakhulu kuba into yenziwe kakuhle kwaye ikiti igcinwe kakuhle ngokubhekiselele kumacandelo angasese (izixhobo kunye neendawo zokuphumla).

Iimpawu zomzimba kunye neemvakalelo zomgangatho

• Ububanzi okanye Ububanzi bemveliso kwii-mms: 22
• Ubude okanye Ubude bemveliso kwi-mms njengoko kuthengiswa, kodwa ngaphandle kwencam yokuthontsiza ukuba le yokugqibela ikhona, kwaye ngaphandle kokuthathela ingqalelo ubude boqhagamshelo: 33
• Ubunzima beegram zemveliso njengoko ithengisiwe, kunye nencam yokuthontsiza ukuba ikhona: 61.2
• Izinto eziqulunqa imveliso: 304 insimbi engenasici, iPyrex
• Uhlobo lweFactor Factor: Kayfun / Russian
• Inani lamalungu aqulunqa imveliso, ngaphandle kwezikrufu kunye neewasha: 7
• Inani leentambo: i-6 ibandakanya i-4 resistor fixing studs
• Umgangatho woMsonto: Ulungile
• Inani le-O-rings, i-Dript-Tip ayibandakanywanga:6
• Umgangatho we-O-rings ekhoyo: Ilungile
• Izikhundla ze-O-Ring: uQhakamshelwano lwe-Drip-Tip, i-Top Cap-Tanki, i-Bottom Cap-Tanki, enye
• Umthamo kwiimililitha ezisebenzisekayo ngokwenene: 5
• Lilonke, uyawuxabisa umgangatho wokwenziwa kwale mveliso ngokunxulumene nexabiso layo? Ewe

Qaphela umenzi wevape malunga neemvakalelo zomgangatho: 4 / 5

Izimvo zomhloli kwiimpawu zomzimba kunye neemvakalelo zomgangatho

I-atomizer yenziwe ngamacandelo ensimbi angenasici angama-304. Itanki yenziwe nge-pyrex ebuthathaka (ubukhulu be-1,75 mm). Iphini elilungileyo elingaguquguqukiyo lenziwe ngobhedu olucwecwe ngesilivere ukwenzela ukhuseleko olungcono lokutya kwaye, ngokutsho komenzi, ukuhanjiswa kombane okungcono…. ubude bubonke ngaphandle kokudibanisa: 46,5mm.

I-plate kunye ne-screws yokulungisa nayo i-"stainless steel 304". Umphezulu we-cap unamacandelo amabini, i-ring nottched, screwed, apho sazisa khona i-drip-tip, esiyisusayo ukufikelela kwi-2.^eME umngxuma wokuzalisa waphumela kwitshimini ephezu kwegumbi lokufudumeza.

Iringi yokulungelelaniswa kokuhamba komoya isebenza ngokujikeleza kwisiseko somphantsi we-atomizer. Ikhupha okanye ivale imingxuma yomoya emibini esecaleni eyi-5,3 x 3,2 mm. Ndiza kuthetha ngeempawu ze-drip-tip engezantsi, yazi apha ukuba ivula kuphela i-6 mm ububanzi xa ifunxa.

.

I-indulgence yenziwe kakuhle, i-O-rings ene-triple lips iqinisekisa itywina eligqibeleleyo kwaye igcine iindawo ezahlukahlukeneyo kakuhle kunye. Imisonto iphinde yenziwe kakuhle, ngokubanzi sijongana nento entle.

Iimpawu zokusebenza

• Uhlobo loqhagamshelo: 510
• Ukulungiswa kwe-positive stud? Hayi, indawo yokugungxula inokuqinisekiswa kuphela ngohlengahlengiso lweterminal eqinisekileyo yebhetri okanye imod apho iya kufakwa khona.
• Ubukho bolawulo lokuhamba komoya? Ewe, kwaye iyatshintsha
• Idayamitha kwi-mms ubuninzi bolawulo lomoya olunokwenzeka: 17 x 2
• Ubuncinci bedayamitha kwiimm zolawulo lomoya olunokwenzeka: 0.1
• Ukuma kommiselo womoya: Ukusuka ngaphantsi kunye nokuthatha inzuzo yokuchasana
• Uhlobo lwegumbi le-Atomization: Uhlobo lweBell + itshimini
• Ukutshatyalaliswa kobushushu beMveliso: Ngokuqhelekileyo

Izimvo zomhloli kwiimpawu zokusebenza

Iimpawu eziphawulekayo zokusebenza zikwi-2 iingongoma eziphambili, ukulungiswa kwe-airflow kunye nokuzaliswa phezulu.

Umsesane wohlengahlengiso ujikeleza ngokukhululekileyo kwisiseko sekepusi esezantsi, ukuchasana kwayo nokulungiswa okungafanelekanga kuphakathi, kwicala lam ndiyifumana ayanelanga. Ubonelelo lomoya oluphezulu, 2 x 17mm², lufanelene ngokugqibeleleyo nokusetyenziswa kwe-atomizer engaphantsi kwe-ohm.

Ukuzaliswa, kudlulela emva kokukhulula i-ring ye-notched ye-cap ephezulu. Uya kukhathalela ukufaka incam yakho ngaphakathi kwesibane esi-oblong* esivela emazantsi obunzima kwicala. Musa nje ukugalela nayiphi na ijusi ngaphakathi kwitshimini, kwaye i-5ml yakho iya kusebenza ixesha elide ngokuxhomekeke kulungiselelo lwakho.

Ngexesha lokuqalisa kokuqala, xa ikhoyili yakho inyusiwe, ngexesha lokuvuza (ukufumisa ii-capillaries), kunqande kangangoko kunokwenzeka ukugalela ijusi kwiinlets zomoya phantsi kokuchasana, le mpazamo iya kubangela ukuvuza, ngokukhawuleza xa uvula. imingxuma yomoya. Vala ii-inlets zomoya ukuze ugcwalise i-atomizer, ngenxa yesizathu esifanayo nangaphambili, kodwa ngeli xesha ngenxa yokuvula okuphezulu kukhuthaza ukuhamba kwejusi nakwi-capillaries, ngoko ke enye kuphela indlela yokuphuma kuye: i-airholes.

Ukucoca kulula ngenxa yokuba unokuqhawula ngokupheleleyo i-Indulgence yakho, ii-studs ezixhomayo kunye nepini elungileyo ibandakanyiwe.   

Iimpawu zeDrip-Tip

• Uhlobo lwe-drip-tip attachment: 510 ene-"thermal evacuation" inkqubo. 
• Ubukho be-Drip-Tip? Ewe, i-vaper inokusebenzisa kwangoko imveliso
• Ubude kunye nodidi lwe-drip-tip ekhoyo: Mfutshane
• Umgangatho we-drip-tip yangoku: Ilungile

Izimvo zomhlalutyi malunga ne-Drip-Tip

Ngamakhonkco ayo amabini e-O, i-drip-tip ifakwe ngokugqibeleleyo kwi-cap ephezulu. Ifutshane (i-9 mm ingabandakanyi isiseko se-510) kwaye ilinganisa i-11,75 mm ububanzi bangaphandle, i-6 mm kuphela yokuvula kwangaphakathi. Yenziwe ngezinto ezimbini: isinyithi kunye nedelrin. Enyanisweni, le yokugqibela ifakwe kwikholamu yesinyithi kwaye idlulele ukwenza indawo edibeneyo ye-drip tip kunye namalungu ayo. I-insulation efanelekileyo ye-thermal (okanye i-conductivity engafanelekanga) ye-delrin ivumela i-tip ye-drip ukuba ingashushu xa ukhetha ukusebenzisa i-ato kumandla aphezulu.

Ukuqinisekisa uphononongo

• Ubukho bebhokisi ehamba nemveliso: Ewe
• Ngaba ungatsho ukuba ukupakishwa kufikelele kwixabiso lemveliso? Ewe
• Ubukho bencwadana yomsebenzisi? Ewe
• Ngaba le ncwadana iyaqondakala kumntu ongathethi ngesiNgesi? Hayi
• Ngaba le ncwadana ichaza ZONKE iimpawu? Ewe

Inqaku leVapelier malunga nokulungiswa: 4 / 5

Izimvo zomhloli malunga nokupakishwa

Iatomizer yakho ifika kwibhokisi yeplastiki ecacileyo esongelwe ngefilimu evalwe ngobushushu. Ngaphakathi, igwebu elimnyama elithambileyo elinomphezulu othambileyo, lihlala kwi-ato, itanki esecaleni, kunye nebhegi yezixhobo kunye neendawo ezisecaleni. Nazi iinkcukacha zezinto ezikhoyo engxoweni: 1 Phillips screwdriver, 3 izikrufu kunye 5 replacement seals, kwakunye shutter ukumisa ukufika incindi kwicala lonke, ngaloo ndlela ivumela ukufezekiswa indibano ikhoyili eyodwa .

Uya kufumana isaziso ngesiNgesi, ngesisa sinikezelwe ngemifanekiso echazayo ekufuneka yanele ukuqonda yonke into kwaye ke ngoko ukunqanda iiFrancophiles ezimsulwa ekuthatheni uguqulelo oluthambileyo lwamabinzana obuchule abhekiselele kwivape kwaye amagama amaninzi aphantse angaziwa. IsiFrentshi/isiNgesi (kunye nolunye uhlobo). Kukwakho nekhadi elincinane apho laziswa khona indlela esebenzayo yeatomizer yakho kulo lonke ulawulo lomgangatho, ngaphandle kokwazi ngenene ukuba imalunga nantoni kuba akukho nto ivelayo phambi kwesihloko ngasinye esikhankanyiweyo.

Iphakheji iyonke ngokwaneleyo kwaye ihambelana nenqanaba loluhlu lwento ecetywayo.

Amanqaku asetyenziswayo

• Izibonelelo zothutho ezinemod yoqwalaselo lovavanyo: Kulungile kwipokotho yebhatyi yangaphandle (akukho deformation)
• Ukuqhawula ngokulula kunye nokucoca: Kulula kodwa kufuna indawo yokusebenza
• Izixhobo zokugcwalisa: Kulula, nokuba ume esitratweni
• Ukulula kokutshintsha izixhasi: Kulula kodwa kufuna indawo yokusebenza ukuze ungaphulukani nantoni na
• Ngaba kunokwenzeka ukusebenzisa le mveliso imini yonke ngokukhapha kunye neebhotile ezininzi ze-EJuice? Hayi
• Ngaba iye yavuza emva kosuku lokusetyenziswa? Hayi
• Kwimeko yokuvuza ngexesha lovavanyo, iinkcazo zeemeko ezenzeka kuzo:

Qaphela iVapelier malunga nokulula ukusetyenziswa: 2.7 / 5

Izimvo zomhlalutyi malunga nokusetyenziswa kwemveliso

Ngaphambi kokusebenzisa iatomizer kuya kufuneka unyuse ikhoyili yakho! Nangona ndingenakwenza okuninzi kuwe kulo mbono, ndisaya kuzama ukunika izikhokelo ezithile ukuze ndingabonakali ndingenambulelo, kwaye ndiya kunityhilela amava am amancinci eentsuku ezi-3 kunye ne-2 montages.

I-sub-ohm ilinge ku-0,5 ohm kunye ne-FF1 ukuqalisa. Ukusuka eKanthal ngo-5/10^eME kwi-diameter yangaphakathi ye-3mm, i-5 ijika kunye nekhoyili enye, kunye ne-shutter. I-Fiber Freaks density 1 inokuba yi-capillary kunye nokujikeleza kakuhle kwejusi kwaye inikezela umgangatho ophantsi wokugcinwa kunobuninzi 2. Kumxholo wetanki ye-ato, esi sizathu esabangela ukuba ndiyisebenzise, ​​ngakumbi ekubeni ngeli xabiso lokumelana. kuyimfuneko ukuba ukwazi ukubala unikezelo olunesisa lolwelo. Ngomlinganiselo wefayibha ndikhetha ubuncinci, oko kukuthi gcwalisa iziteshi kwaye unganyanzeli ikhoyili. Kwi-30 W, umthamo we-vape uxinene, i-airflows ivule isiqingatha. Incasa ayiyodwanga kodwa ayikho nayo.

Kwi-40 W, iqala ukuthumela ngokumalunga nomthamo womphunga kwaye imile ukubuyisela, ihlala ivulekile isiqingatha.

Kwi-50 W, kungcono ukuvula ngakumbi kwincasa yam, kwaye ungandisi ixesha lokufunxa ngaphaya kwe-6/8 imizuzwana, icandelo lencasa lihlala libekiwe, umthamo wevape mkhulu kakhulu kwaye ukusetyenziswa kukwenza uzive. (kukho ikhoyili enye kuphela, nangona kunjalo, kufuneka impompe kakhulu kwikhoyili ephindwe kabini kweli xabiso). Isigwebo emva kwetanki, kunye neeyure ezi-4 zomphunga: ukuveliswa komphunga olungileyo kodwa udanile ngokubuya kweencasa. I-ato ishushu ngokuphakathi, isanyamezeleka, nakwi-50 W.  

Enye inketho yayikukufaka i-coil ephindwe kabini kwi-stainless steel 0,30 ubukhulu, i-2,5 mm ububanzi, i-6 ijika, ixabiso elipheleleyo le-0,8 ohm. Isacinywa yi-FF 1, amava ayaqinisekisa ngakumbi. Okokuqala, itya ijusi ngokukhawuleza kancinci (nge-25W, ndikhuphe i-5 ml kwiiyure ezi-6 ngaphandle kokuyeka imod ngaphezulu kwemizuzu eli-10 ixesha ngalinye (yithi amaxesha ama-4). tastier (isiqingatha sokuhamba komoya) kunye nomthamo ochanekileyo womphunga, ndikwacinga ukuba lolona lungelelwaniso lulungelelanisayo ndifikelele kweli xabiso lokumelana. malunga uthelekiso kunye dripper uphawu efanayo! Inqaku elungileyo ilele kwinto yokuba vape akukho shushu kwaye drip-tip uhlala ebandayo, abathandi fruity baya kubona inzuzo eqinisekileyo.

Ngokuqinisekileyo kunokwenzeka ukuphumeza iziphumo eziqinisekisa ngakumbi, kodwa ngenxa yokunqongophala kwexesha, andizange ndiqhubele phambili kwiinketho zendibano, ukuthetha inyani bendilangazelela ukuphinda ndiqalise i-dripper yam yomzuzu.  

Iingcebiso zokusetyenziswa

• Ngoluphi uhlobo lwe-mod ekucetyiswa ukuba usebenzise le mveliso? Ezobuchwephesha kunye noomatshini
• Yeyiphi imodeli yemodeli ekucetyiswa ukuba usebenzise le mveliso? Naluphi na uhlobo lwe-mod kwi-22mm, i-mechanical okanye i-electro.
• Ngoluphi uhlobo lwe-EJuice ekucetyiswa ukuba usebenzise le mveliso? Zonke ulwelo akukho ngxaki
• Inkcazo yoqwalaselo lovavanyo olusetyenzisiweyo: Insimbi engenasici kabini icoil 0,80 ohm diam 2,5 mm – Fiber Freaks density 1 – eVic VTC mini
• Inkcazo yoqwalaselo olufanelekileyo kunye nale mveliso: I-Sub ohm ukuya kuthi ga kwi-0,5 ohm kunye ne-2 ohm max.

Ngaba imveliso yayithandwa ngumhlalutyi: Ewe

I-avareji iyonke yeVapelier yale mveliso: 3.9 / 5

Ikhonkco lokuphononongwa kwevidiyo okanye ibhlog egcinwe ngumhloli ogunyazise uphononongo

Iposti yemo yomhlalutyi

Ukuqukumbela le kholamu, ndingathanda ukuphawula ukuba ndingumlandeli osele ekhulile weedrippers kwaye izimvo zam ezigxekayo malunga nokubuyiselwa kweencasa nge-Indulgence zinokuchaphazeleka kwaye zisenokungabonakalisi olwakho uluvo ngalo mbandela. Kukuwe ngoku ukuba uvavanye le ato kwaye uyinyuse ngokokuthanda kwakho, mhlawumbi uya kuphumelela ngakumbi kwaye wamkele le RTA engaswelekiyo iinketho ezinomdla.

Ngenxa yexabiso layo, awukho mngciphekweni kakhulu kwaye indibano yakho ihlala iyeyona ndawo ibalulekileyo yokufumana ivape ekufanelekela kakhulu. Le atomizer inoyilo lwayo, zonke iinkqubela phambili zangoku kunye nokuzimela okulungileyo. Kukuwe, sigcine usazi!

Ibhayiloji

*Inqaku loMhleli: Ukukhanya = Ukugqobhoza ukuvulwa

(c) ICopyright Le Vapelier SAS 2014 – Kuphela kukushicilelwa okupheleleyo kweli nqaku okugunyazisiweyo – Naluphi na uhlengahlengiso lwalo naluphi na uhlobo aluvumelekanga ngokupheleleyo kwaye lunyhasha amalungelo eli lungelo.