Ndijonge ulwazi oluninzi, kwiiadaptha ukwenzela ukuba ezinye zeeseti zam "zigungxule".

Ngelishwa andizange ndifumane okuninzi, kwaye ulwazi oluncinci endilufumeneyo lwalungalunganga ngamanye amaxesha.

Ngoko ke ndiza kunikela kuni le nto, ukuze nani ningabi nakwezi zinto zimkhathazayo zimangalisayo.

Ngokubhekiselele kuthi, ndifumene iindidi ezi-4 zeeadaptha zezona ziqhelekileyo:

• M21x1
• 5
• 5 × 0.5
• M20x1

 

"M" ithetha ukuba yi-ISO metric thread, luhlobo lomatshini oluchanekileyo ngokweenqobo zokuthunga.

Inombolo elandelayo yidayamitha yeadaptha.

Okokugqibela, bubunzulu bomsonto.

 iM21x1:

Andifumananga iadaptha, kodwa kukho iminqwazi ephezulu ehambelana nale milinganiselo.

Ndiyavuma ukuba andizange ndiphendle kakhulu le modeli kuba ilungelelanisa ngokukodwa kwiimodyuli ezinobubanzi be-23mm njengeChi You, iCaravela (kwi-23), iKumkani Mod ...

 iM20x0.5:

Yimodeli efumaneka ngokulula, engabizi kakhulu kwaye ilungelelanisa ngokukodwa kwi-Stingray.

Kukho ukuhla okumbalwa kule modeli.

Ithengiswa ngaphandle kwe-insulation kwaye umngcipheko wesiphaluka esifutshane ubalulekile.

Ngaphandle kwe-insulation kunye nentloko ye-screw, kwipali echanekileyo, ngokukhawuleza ngaphandle (xa iphuma), kunyanzelekile ukuba kusetyenziswe i-accumulators ene-studded ukuze ube noqhagamshelwano.

Akukho seto lunokwenzeka kumqhagamshelwa we-pin. Nangona kunjalo, "i-tweak" ekhuselekileyo inokwenzeka (ndiyakuxelela ngayo ekupheleni kwesifundo).

I-Brass yinto enhle kakhulu, kodwa iyinto ethambileyo kunentsimbi, ngokunxitywa, imisonto yecandelo ayisabambeki, kwaye iadaptha yakho ayinakusetyenziswa.

Iziphumo zomfanekiso:

 

I-M20.5×0.5:

Lo bubungakanani obungaqhelekanga kwiimod, kwaye busetyenziswa kakhulu kwi-Nemesis.

Ngokolwazi lwam, zithathu iindidi zeeadaptha kule milinganiso:

Eyokuqala yenzelwe ngokukodwa umbutho kunye neNemesis kunye ne-kayfun V3.1

Okwesibini kubonakala kufana nemodeli ye-M20x0.5 echazwe ngasentla. Ngeenzuzo ezifanayo kunye nokungalunganga. Nangona kunjalo, ifumaneka kwizinto ezintathu (intsimbi, ubhedu okanye ubhedu)

Ewe sifumana uhlobo lwesithathu lwe-adapter, ngokombono wam eyona nto inomdla kwaye ngaphezu kwayo yonke into ekhuselekileyo. Iza kumacandelo ama-4 amancinci: i-adapter, i-insulator kunye nepleyiti encinci ebhorwe kwiziko layo ukufaka isikrufu soqhagamshelwano.

Isiqwenga ngasinye sinentsingiselo.

I-adaptha, njengoko ikwisithombe sokuqala, ikrwelwe kwi-atomizer ngokucinezela eli cala libonakalayo (kuba kukho ukuhla okuncinci, embindini, kwi-machining yale nxalenye), ngokubhekiselele kwisiseko se-atomizer.

Emva koko siya kwongeza nge-screwdriver kwindawo ephezulu ye-insulation, i-plate encinci ihlatywe phakathi kwayo. Emva koko songeza i-screw.

Iadaptha kunye ne-insulator, zingekho kakhulu, iziqwenga ezibini ezifunyenweyo, ziya kuba yinto enye xa ibekwe kuqhagamshelo lwe-510 yeatomizer yakho.

Inzuzo yale nkqubo kukuba ikhuseleke ngokupheleleyo ngokubhekiselele kwiisekethe ezimfutshane, i-accumulator esetyenzisiweyo ayifuni ukuba ifakwe kwaye i-conductivity iqinisekiswe kakuhle.

Iseti ingafakwa ekugqibeleni kwimod.

Iziphumo zomfanekiso:

I-drawback encinci kuphela kule adaptha kukungabikho komngxuma kwinxalenye yobhedu, okunzima ukuyisusa xa ihleli kwimod ngokususa i-atomizer. Kodwa kulula ukwenza umngxuma omncinci nge-drill ukunqoba le ngxaki.

iM20x1:

Isetyenziselwa iiMod ezininzi, ngokufutshane phantse zonke: iGus, iGP paps, iCaravela kwi21mm kunye ne22mm, JM22, Bagua, Surfrider, Petit Gros, GP Heron kunye nezinye ezininzi...

Ndibone iimodeli ezininzi kulo mlinganiso, ezinye zine-insulation okanye zingenayo, kodwa eyona ixhaphakileyo yile:

Umsebenzi wayo uhlala ufana nowezinye iiadaptha, kodwa le inento engaqhelekanga. Obunye ubuso bayo abukho sicaba ngokupheleleyo. Kukho i-rim evumela ukuba, xa ifakwe kwi-mod, ixhomekeke kwinxalenye ye-insulating ye-accumulator, ngoko ke i-stud 510 ye-atomizer, ayibonakali kancinci kumngcipheko wesiphaluka esifutshane. Oku kuvumela ukusetyenziswa kwee-accumulators ngepali emhlophe ethe tyaba ukuba isikrufu se-atomizers siphuma ngokwaneleyo. Ngaphandle koko, nalapha, kuya kufuneka usebenzise i-accumulator yengono.

Iziphumo zomfanekiso:

Siza kuqaphela kulo mfanekiso, intambo ye-mod, emfutshane, kuba i-adapter, iyanciphisa ubungakanani bemod.

Phawula :

Iiadaptha azihambelani nazo zonke iimodyuli, nangona zihambelana nobungakanani be "M".

Ngokuqinisekileyo ziyakwazi ukufakwa, kodwa ukunciphisa ubungakanani bento ngamanye amaxesha kukhulu kakhulu ukuba ibhetri ikwazi ukuchukumisa zombini iSwitch kunye ne-510 pole ye-ato.

Ke ndinengcebiso elula kuwe: ukwenziwa kwesixhobo sokukhusela.

Thatha i-insulating material ekulula ukuyisika, njengekhadi levenkile endala.

Ngekhampasi, landelela isangqa se-18 mm ububanzi, kunye ne-chisel elungileyo usike le washer, kwaye usebenzisa i-gimlet, ubhoboze iziko (isikhonkwane kunye nesando siya kwenza iqhinga).

Fumana isikrufu esincinci (ngaphezulu okanye ngaphantsi esifutshane / ubude) ngokweemfuno zokubamba ubukhulu.

Voila, i-insulation yakho ikulungele ukusetyenziswa. Icala elisezantsi kukuba iya kudada kwimod, kodwa iya kuhlala kunye nendibano, ke jonga phambi kokuba uvale ukuseta, ukuba intloko yesijija ibheke kwibhetri, kunye nencam ibheke kwipali evumayo kwiatomizer.

Yiba ngqongqo kubungakanani bewasha (18mm) kunye nakwimingxuma esembindini ukuze ingashukumi.

USylvie.i

 Apha ngezantsi yividiyo ehambelanayo enazo zonke iinkcukacha malunga nesi siqwenga sokhuselo senziwe ndim: