Kyakkyawan atomizer, Sauƙi, inganci kuma mai amfani.
Mai daukar nauyinmu VapExperience ne ya aro wannan samfurin (http://www.vapexperience.com/)
Farashin sa shine Yuro 36.
1- Siffofin kasuwanci:
HC Plus shine atomizer na fiber wanda ke kan farashi mai araha na Yuro 38.90. Juriya na mono-mai sake ginawa tare da tanki 3.5ml
2- Halayen jiki, inganci da marufi:
Yana da wuyar gaske tare da diamita na 23 mm, jimlar tsayin 77 mm tare da tip drip (an kawo) da nauyin 90 grs.
Yana da matukar kyau atomizer, duka a cikin sharuddan kayan da machining na sassa.
Tankuna biyu suna zuwa tare da HC Plus. Daya a cikin PPMA da sauran a karfe. Hakanan zaku sami ƙarin zoben O-ring guda huɗu na diamita daban-daban, gyare-gyare guda biyu don resistor, ƙaramin Phillips screwdriver, resistors biyu masu shirye-shiryen amfani, auduga da wick silica.
Zoben hawan iska shine kawai ƙasa a cikin waɗannan halayen saboda yana ƙoƙarin juyawa cikin sauƙi. Mummunan abin da ba a yi tunanin tsarin toshewa ba.
Littafin mai amfani zai kasance da amfani, musamman don shigar da wick da gargadi don cikawa.
3- Siffofin drip tip:
Kyakkyawan tukwici na drip na asali ta siffarsa, dadi a cikin baki kuma yana da inganci mai kyau.
4- Halayen aiki:
- muna da ingarma 510 daidaitacce ta dunƙule.
- Ana sarrafa motsin iska ta hanyar zobe a gindin atomizer ta rami a kowane gefe. Yana yiwuwa a sami buɗewa ɗaya ko biyu.
- Ƙararrawar tana cikin sassa biyu, na ƙasa shine zobe don kula da taron wanda ya dace tare da hatiminsa. Yana da ramuka guda biyu (ɗaya a kowane gefe), waɗanda sau ɗaya a wuri, ba da damar ruwa ya shiga don jiƙa wick.
- saman kararrawa yana da nau'in bututun "misali" tare da madaidaicin diamita na budewa.
A saman, ana ba da wurin injina don saka hatimi. Don haka babu hatsarin cewa wannan hatimin zai motsa...komai yakan kasance a cikin iska.
5- Rating da ake amfani:
Na fara yin resistor dina, amma lokacin da nake gyara shi a cikin ingarma, sai na ga cewa ramukan da ke wurin ba su da amfani. Bayan 'yan ɓangarorin, na yi nasara. Abin da ake so zai kasance a sami wasu ramuka a gaban gaba, saboda iskar da ke zagawa ta ratsa tsakiyar tushe (don haka juriya dole ne a tsakiyar).
Don sanya shi a sauƙaƙe, ya fi dacewa don gyara ƙafafu a kusa da sukurori na studs kuma don ƙarfafawa.
Sai na sa auduga na.
Na yi jinkirin sanin yadda zan sanya wick na gaba. Amma lura da cewa iskar da ke ƙarƙashin juriyata ba ta kasance tare da faranti ba, amma a maimakon haka, tana nunawa.
Don haka kawai sai na sanya wick ɗin da aka jika da naɗewa akan tire.
Sa'an nan kuma na sanya zobe (kasa na bututun hayaki) kulawa don daidaita ramukan zobe tare da tashoshi na tushe na farantin.
Sa'an nan, na buɗe ƙarshen wicks don isa gefuna na tashoshi don kada a sami kwararar ruwa mai yawa yayin tsotsa.
Na rufe atomizer dina sannan na cika tanki.
Domin cika, shi ne ya zama wajibi don rufe kwararar iska ta hanyar zamewa da zobe. In ba haka ba, kuna haɗarin ɗigogi mai tsanani daga ramukan shan iska.
Sa'an nan kuma mu cire karamin karfen da ke ƙarƙashin hular saman, kuma mu cika.
Abin da ya rage shi ne a rufe gaba daya atomizer, bude mashigar iska da vape...
Kammalawa:
Wannan atomizer da gaske ne mai sauqi qwarai don gane taron sa. Ma'anar abubuwan dandano yana nan babu shakka babu, tururinsa matsakaita ne kuma buɗewar iskar yana iyakance a diamita amma mai daraja sosai (ni kaina ba na son ƙari). Saitin wannan zoben kawai ya rasa tallafi don hana shi kunna da kansa.
Atomizer ne da aka bayar don 23mm wanda na ɗora akan 22.6mm na zamani. Saitin ya haɗu da kyau kuma ratar ba a gani ba saboda madaidaicin diamita na wannan atomizer shine 22.8mm. Dangane da karfin ruwan sa, ya dan yi kasa da 4ml da aka sanar.
To, kun san komai.
Ina sa ran karanta ku.
Sylvie.i
