VaporFlask Classic by Wismec
VaporFlask Classic by Wismec

VaporFlask Classic by Wismec

Commercial characteristics

  • Sponsor having loaned the product for the magazine: MyFree-Cig
  • Price of the tested product: 99.9 Euros
  • Product category according to its selling price: High end (from 81 to 120 euros)
  • Mod type: Variable power electronics and temperature control
  • Is the mod telescopic? No
  • Maximum power: 150 watts
  • Maximum voltage: 5
  • Minimum value in ohms resistance for a start: 0.1 (in VW) and 0,05 (in TC)

Reviewer comments on business characteristics

The Vaporflask Classic is part of one of the three Vaporflask models (Classic, Lite, Stout) from Wismec. This electronic box in "classic" version, has a particular shape that takes as a model that of a flange.

Equipped with 2 accumulators, its power can reach 150W and allows you to vape in two different modes, on powers (with a minimum resistance of 0.1Ω) or on temperatures (with a minimum resistance of 0.05Ω).

This box is provided with a micro USB cable for an update of its chipset, if necessary, or a recharging of the accumulators.

Although the design is attractive, it is a significant weight but its curve rounded in the palm of the hand quickly makes you forget this detail. The beautiful is attractive with a reliable chipset pushing the watts especially as it is easy to use, it also knew how to keep a correct size.

It comes in three different colors: black, steel or white.



Physical characteristics and felt quality

  • Product Width or Diameter in mms: 22 x 61
  • Product Length or Height in mms: 91
  • Product weight in grams: 213 vacuum and 302 with 2 batteries
  • Material composing the product: Aluminum
  • Form Factor Type: Classic Box - VaporShark Type
  • Decorative style: Classic
  • Quality of decoration: Good
  • Is the coating of the mod sensitive to fingerprints? Yes
  • All components of this mod seem well assembled? Yes
  • Fire button position: Lateral near the top cap
  • Fire button type: Mechanical metal on contact rubber
  • Number of buttons in the interface, including touch areas if they are present: 2
  • Type of User Interface Buttons: Metal Mechanics on Contact Rubber
  • Quality of the interface button (s): Very good, the button is responsive and does not make any noise
  • Number of parts in the product: 2
  • Number of threads: 1
  • Quality of the threads: Very good
  • Overall, do you appreciate the quality of manufacture of this product with regard to its price? Yes

Rating of the vapelier as to feelings quality: 3.7 / 5 3.7 5 out of stars

Reviewer's comments on physical characteristics and perceived quality

Although the thickness of the box is only 22mm, the template including the curvature of 5mm gives you a total thickness of 27mm for a width of 60mm. The weight is 213g empty and 302 grams (mini) with the 2 batteries. The body is in matt black anodized aluminum (for my test product) and contrasts with the brushed aluminum buttons. This coating is particularly soft to the touch but significantly marks all fingerprints.

On the top cap, the connection is stainless steel with a spring-loaded pin. On this top, we also distinguish a discrete engraving noted VF for VaporFlask.

On all the outer curved side, is the hood fixed by 4 magnets for the insertion of the batteries. Under the box, a slight slot allows to insert a nail to lift it. The polarity of the batteries being indicated inside, the location is done simply.

Below, at each end, at the level of the batteries we notice 2 series of 4 holes for the possible degassing of the batteries. In the middle, we find some discreet inscriptions with roughly the name of the box.

The screen with the buttons and the micro USB connector are placed on the cutting edge of the VaporFlask opposite the 510 connection, which makes its use convenient. This OLED screen is curved and remains classic with just the useful information constantly: battery charge, resistance value, voltage and power.

The buttons are round with a conical surface for a better feeling to the touch. They are perfectly integrated and react well without any hesitation. On the bottom we have the micro USB connector to connect the cable, to perform a chipset update or reloading.





Functional features

  • Type of chipset used: Owner
  • Connection type: 510
  • Adjustable positive plot? Yes, through a spring.
  • Lock system ? Electronic
  • Quality of the locking system: Excellent, the chosen approach is very practical
  • Features offered by mod: Battery charge display, Resistance value display, Short circuit protection from atomizer, Reverse battery polarity protection, Display of current vape voltage , Display of the power of the current vape, Fixed protection against overheating of the resistors of the atomizer, Temperature control of the resistors of the atomizer, Supports the update of its firmware
  • Accusability: 18650
  • Does the mod support stacking? No
  • Number of batteries supported: 2
  • Does the mod retain its configuration without batteries? Yes
  • Does the mod offer a recharge feature? Charging function possible via Micro-USB
  • Is the recharge function pass-through? Yes
  • Does the mode offer a Power Bank function? No power bank function offered by the mod
  • Does the mode offer other functions? No other function offered by the mod
  • Presence of a regulation of the flow of air? Yes
  • Maximum diameter in mms of compatibility with an atomizer: 22
  • Accuracy of the output power at full charge of the battery: Excellent, there is no difference between the requested power and the actual power
  • Accuracy the output voltage at full charge of the battery: Excellent, there is no difference between the requested voltage and the actual voltage

Vapelier's note regarding functional characteristics: 5 / 5 5 5 out of stars

Reviewer's comments on functional features

The functional features are quite simple and common in the face of different models of boxes equipped with more chipset elaborated in features, but the most important is there, with:

- 2 18650 format rechargeable battery.
- An output power from 1 to 150 W with a discharge current that requires more than 25 amps so be careful to take the same two rechargeable batteries with the required characteristics. - two working modes in power or temperature.
- The wires that can be used are Nickel, Titanium or 316 stainless steel for temperature mode.
- The resistance range is from 0.1Ω to 3.5Ω for the power mode.
- The resistance range is 0.05Ω to 1Ω for the temperature mode.
- Lock function of the settings.
- Economic mode with the extinction of the screen during the vape.
- Resistance lock function to keep in memory the same initial value of the resistance at room temperature in temperature mode.
- Choice of display in ° C or ° F with a range of 100 to 315 ° C or 200 to 600 ° F.
- Ability to rotate the display to the right or left.
- In temperature control the accepted wires are: Nickel, Titanium or Stainless 316.
- Possibility of recharging the box via the micro USB cable.
- Update the chipset via the USB cable.

The securities are also present with:

- Detection of the presence of the atomizer.
- The box matts safely when the resistance is not within the accepted value range.
- Protection against short circuits.
- Temperature warning when the internal circuit of the device exceeds 70 ° C "Device too hot".
- Temperature protection in CT mode when the resistance heats up above the given value.
- Deep discharge warning when the battery is too weak.
- Unbalance alert when voltage difference between your batteries is greater than 0.3 V.
- USB alert when charger voltage is equal to or greater than 5.8 V.
- Load error alert, if there is no current detected when charging.
- Reverse polarity protection on at least one of the accumulators.

vaporFlask class_capot-accuvaporFlask-class_ecran

Evaluation of the packaging

  • Presence of a box accompanying the product: Yes
  • Would you say that the packaging is up to the price of the product? Yes
  • Presence of a user manual? Yes
  • Is the manual understandable for a non-English speaker? Yes
  • Does the manual explain ALL features? Yes

Vapelier's note on packaging: 5 / 5 5 5 out of stars

Reviewer's comments on conditioning

Finally here is a packaging as I like!

With this VaporFlask Classic, nothing is missing. You receive it in a large rigid cardboard box, in which your box will be wedged in a black foam. In this box, a second floor, conceals a warranty with a user manual and a micro USB cable for reloading or updating the chipset.

I particularly appreciated the presence of the instructions for use provided in many languages ​​and the effort to have a correct translation. Thus, all information is given to us and in French.

Perfect packaging that honors this product.


Appreciations in use

  • Easy transportation with the test atomizer: Ok for an inside jacket pocket (no deformations)
  • Disassembly and cleaning facilities: Super simple, even blind in the dark!
  • Easy to change the batteries: Easy, even standing in the street
  • Did the mod heat up? No
  • Has there been erratic behavior after one day of use? No
  • Description of situations in which the product has experienced erratic behavior

Vapelier's note in terms of usability: 5 / 5 5 5 out of stars

Reviewer's comments on the use of the product

In use this VaporFlask Classic has a wonderful handling. Comfortably installed in the palm, it makes us quickly forget its weight. The support on the switch is instinctive and the button is sufficiently salient to make the handling pleasant.

The information on the screen looks a bit small and the curvature reduces the brightness a bit. Even if everything is clearly visible, there was enough room for a larger OLED screen, it might have been more appreciable.

For the insertion of the batteries, the hood is well designed, it is correctly maintained with 4 magnets and no game hinders the fixation. The polarity of the batteries is clearly indicated so that no error is made.

Regarding the settings, it is useless for me to describe the operating mode since it is given in the manual and in French, however for those who are interested, know that it is relatively simple and that the approach of each step is judiciously chosen.

It is very important that you choose the same two batteries dedicated to this box, each having a CDM of at least 25 A.

The module allows to restore a good regulated vape and thanks to dual batteries, both in V / W mode and temperature control, you will not only have great power but also a perfect autonomy.

The connection of the charging module by micro USB is located on the bottom side of the box, this will allow you to leave the VaporFlask standing during reloading.

The small defect I could do to this product is that it was not designed with a millimeter more to accept 23mm diameter atomizers.


Recommendations for use

  • Type of batteries used during the tests: 18650
  • Number of batteries used during testing: 2
  • With which type of atomizer is it advisable to use this product? Dripper, A Classical Fiber, In Sub-ohm Mount, Genesis Rebuildable
  • With which model of atomizer is it advisable to use this product? All atomizers having a maximum diameter of 22mm
  • Description of the test configuration used: The Aromamizer in double coil has 0.3Ω and on the Target in CT to 0.2Ω
  • Description of the ideal configuration with this product: There is not really, everything suits him provided the atomizer does not exceed the 22mm diameter

was the product liked by the reviewer: Yes

Overall average of the Vapelier for this product: 4.7 / 5 4.7 5 out of stars

Link to a video review or blog maintained by the reviewer author of the review


The mood ticket of the reviewer

A box has almost 100 euros which is a bit more expensive compared to some box of the market that offer the same opportunities (even some others). But its sober and ergonomic appearance with a coating of "velvet", make it a classy object.

In addition, this form Bean is really ideal for us to forget the weight of this VaporFlask Classic. Ergonomics that gives excellent support in the palm of the hand, with a manipulation on the switch that is just obvious.

With these two batteries and its proprietary chipset, it has a consistent autonomy and a vape regulated very pleasant. Moreover, its use is easy to exploit.

I regret the display of the screen that remains a fair bit, and the size of the thickness of the box that does not allow to place an atomizer more than 22 mm diameter without it clogs.


(c) Copyright Vapelier SAS 2014 - Only the complete reproduction of this article is authorized - Any modification of any nature whatsoever is totally prohibited and violates the rights of this copyright.

Print Friendly, PDF & Email
Com Inside Bottom
Com Inside Bottom
Com Inside Bottom
Com Inside Bottom

About the Author