Header
IN SHORT:
Alliance V2 Plus by Vapergate & Fogwing Vapor
Alliance V2 Plus by Vapergate & Fogwing Vapor

Alliance V2 Plus by Vapergate & Fogwing Vapor

         

Commercial characteristics

  • Sponsor having loaned the product for the magazine: MyFree-Cig
  • Price of the tested product: 48.9 Euros
  • Product category according to its selling price: Mid-range (from 36 to 70 euros)
  • Atomizer Type: Classic Dripper
  • Number of resistances allowed: 2
  • Resistance Type: Classic Reconstructible, Rebuildable Micro Coil, Reconstructible Classic Temperature Controlled, Rebuildable Micro Coil with Temperature Control
  • Supported Bit Type: Cotton, Fiber Freaks Density 1, Fiber Freaks Density 2, Fiber Freaks Yarn 2 mms, Fiber Freaks Cotton Blend
  • Quantity in milliliters announced by the manufacturer: 1

Reviewer comments on business characteristics

The V2 Plus Alliance is an extremely versatile dripper, hard to beat in the genre. With its digging platform with three studs, interchangeable central stud, its steel finish is irreproachable.

It comes with a multitude of accessories to allow it to metamorphose to give it a different look and vary its vape with a limited or extended room.

alliance_pieces

Physical characteristics and felt quality

  • Width or Diameter of the product in mms: 22
  • Length or height of the product in mms as it is sold, but without its drip tip if it is present, and regardless of the length of the connection: 40
  • Weight in grams of the product as sold, with its drip tip if it is present: 44
  • Material constituting the product: Stainless steel, Delrin
  • Form Factor Type: Kayfun / Russian
  • Number of component parts without screws and washers: 5
  • Number of threads: 2
  • Quality of the threads: Good
  • Number of O-rings, Dript-Tip excluded: 3
  • Quality of O-rings present: Good
  • O-Ring Positions: Drip-Tip Connection, Top Cap - Tank, Bottom Cap - Tank
  • Capacity in milliliters actually usable: 1
  • Overall, do you appreciate the quality of manufacture of this product with regard to its price? Yes

Rating of the vapelier as to feelings quality: 4 / 5 4 5 out of stars

Reviewer's comments on physical characteristics and perceived quality

The Alliance V2 plus is made of stainless steel with a very successful brushed finish.

The look is original with a base and a top-cap which dissipate the heat. The design of these parts, on either side of the tank and without enlarging the chamber, gives it a noble and warlike attitude.

The quality of the parts and the machining are irreproachable.

The laser engravings are located under the table top, under the base and on the three tanks provided. They are well executed and by running your finger, you can feel the mark of the line with a good depth.

The number of parts for this atomizer is a minimum of 5 but can go up to 8 by adding the base, the extension and the drip-tip adapter. The threads are good and the 510 connections, one under the base and one under the platter, do their job without a problem. These two parts are assembled by screwing and make contact with a copper pin which is adjusted with a flat screwdriver. The edge of the tray is wide and provided with two joints for a perfect maintenance of the tank.

The board has three studs. The two negative on each side and the positive in T in the center which has two openings for the individual blocking of the resistance. Each hole is 3mm in diameter, so the widest wires can be inserted without difficulty. It is possible to replace the central T-stud with a central copper or steel stud with only one opening.

For the airflow: a ring which is screwed on the top-cap is inserted in the tank, which makes it possible to rotate without problem this piece which opens or closes the air holes on the tank. Two rings are proposed, one for the simple coil and the other for the double. Depending on the chosen tank, you get a tight or aerial vape.

alliance_drip tip

alliance_tank-course basisalliance_topcap-base

alliance_topcap-ring

alliance_pin

Functional features

  • Connection type: 510
  • Adjustable positive stud? Yes, through an adjustment by thread, the assembly will be flush in all cases
  • Presence of air flow regulation? Yes, and variable
  • Diameter in mms maximum of the air regulation possible: 10
  • Minimum diameter in mms of the air regulation possible: 0.1
  • Air regulation positioning: Lateral positioning and benefiting resistors
  • Spray chamber type: Conventional / Wide
  • Heat dissipation of the product: Excellent

Reviewer's comments on functional features

The plate is sufficient to work the construction of a double coil, but remains too tight for the quadri-coil. However, the central stud can be replaced by a thinner stud provided, to allow a more exotic mounting. It is possible to use very thick wires since the openings of the studs measure 3mm in diameter.

The two pins, the one under the tray and the one under the base, are adjustable by a copper screw.

The plateau is dug enough to allow a liquid reserve of about 1ml. It's not huge but enough for a dripper.

This atomizer has three interchangeable tanks which have more or less important air intake surfaces depending on whether you opt for a single or a double coil and a tight or airy vape.

On the top of the tank and under the tray, the two pieces that match the atomizer are heat sinks with windows across the width. In each of them, there is a Delrin piece for better efficiency.

The size of the atomizer may vary depending on the number of parts used. It can be compact or even high enough according to your tastes, with a concentrated vapor or on the contrary a diluted vapor therefore lighter.

alliance_plateau

alliance_variantes-tank2

Drip-Tip Features

  • Type of drip-tip attachment: Owner but passage to 510 through an adapter not supplied
  • Presence of a Drip-Tip? Yes, the vaper can immediately use the product
  • Length and type of drip-tip present: Short
  • Quality of the drip-tip present: Very good

Reviewer's comments on the Drip-Tip

With the Alliance V2 plus, the “drip-tip” offer is generous since we have a stainless steel drip-top, another in Delrin and a stainless steel drip-tip associated with a Delrin adapter.

All three are short in length. The drip-tip is quite common, right like the drip-tops. What differentiates them is the diameter since the drip-tops are still 13mm diameter. Huge and very airy!

In the mouth, the materials are comfortable, but the diameter of the drip-tops requires an adaptation for this consequent opening.

alliance_driptip2

Evaluation of the packaging

  • Presence of a box accompanying the product: Yes
  • Would you say that the packaging is up to the price of the product? Yes
  • Presence of a user manual? No
  • Is the manual understandable for a non-English speaker? No
  • Does the manual explain ALL features? No

Vapelier's note on packaging: 3 / 5 3 5 out of stars

Reviewer's comments on conditioning

No instructions for use for exceptional packaging, which weighs down the note a little and it's a shame because such a complete set and with so many parts, I had never seen this. This Alliance V2 Plus is offered with:

• 1 Post Central T, 2 Holes (already mounted)
• 1 Post central single hole stainless steel
• 1 Post central single copper hole
• 1 PEEK Insulator
• 1 removable heat sink tray (already mounted)
• 2 airflow rings with a new design
• 1 X v1 mutation style airflow ring (already mounted)
• 1 room extension
• 1 drip-tip wide steel (already assembled)
• 1 drip-tip delrin large
• 1 drip-tip 510 delrin
• 1 drip tip adapter 510
• 1 single coil ring
• 1 dual coil ring (already assembled)
• Spare seal set
• 1 Small Phillips screwdriver
• 1 Cotton bacon bit V2
• 1 nichrome wire Omega wire N90

alliance_packaging2

alliance_packaging1

Appreciations in use

  • Transport facilities with mod of test configuration: Ok for an inside jacket pocket (no deformations)
  • Disassembly and cleaning facilities: Easy, even standing in the street, with a simple tissue paper
  • Filling facilities: Easy, even standing in the street
  • Easy to change resistors: Easy but requires a workspace to lose nothing
  • Is it possible to use this product throughout the day with several vials of EJuice? Yes perfectly
  • Was there leak after one day of use? No
  • In the event of leaks during the tests, descriptions of the situations in which they occurred:

Vapelier's note on ease of use: 4.4 / 5 4.4 5 out of stars

Reviewer's comments on the use of the product

In use, this dripper is the absolute chameleon. Both on the level of the vape than on that of the aesthetics.

In single coil, it is more interesting to have a short room (so no extensions), to use the copper central stud and unnecessary to add the base under the tray. The ring for the single coil will be preferred with the 510 drip-tip and its adapter. Thus, we get a generous classic vape and beautiful flavors.

In double coil, depending on the value of resistance achieved, it will choose the accessories to add according to your preferences for a vape restoring a concentrated or diluted flavor.

For vape access on power vaping, the Alliance V2 plus is sufficiently isolated to allow editing to support the 200 watts. Extension and heat sinks will be appreciated and appropriate. Nevertheless the size of your dripper will be largely doubled but the steam engine will be running.

To change the central block, the manipulation is very simple, just remove the pin under the tray, pull the positive pad and change it with the desired pad then screw the pin.
The rim of the base with these two joints is rather wide with good support, fortunately moreover because, with the extension, the consequent size and the weight require it.

alliance_resistance

Recommendations for use

  • With which type of mod is it advisable to use this product? Electronics AND Mechanics
  • Which mod model is it recommended to use this product with? none in particular
  • With which type of EJuice is it advisable to use this product? All liquids without problem
  • Description of the test configuration used: on mod electro for a power of 45 watts in double coil 0.5 ohm (kanthal 0.5mm)
  • Description of the ideal configuration with this product: none in particular

was the product liked by the reviewer: Yes

Overall average of the Vapelier for this product: 4.5 / 5 4.5 5 out of stars

Link to a video review or blog maintained by the reviewer author of the review

 alliance_variantes-tank

The mood ticket of the reviewer

For each vape configuration, the V2 plus Alliance has an appropriate blend of flavors and steam.

This Chameleon dripper can adapt to a cushy vape in the sofa to do a single coil juice test, in a discreet format, but it can also become very impressive with an imposing size by adding the extension and the heatsink on its base, after having carried out an assembly supporting the 200 watts. For vapers, it will be a good friend who will make big impressive clouds.

A good quality for this atomizer and a very complete set that offers several aesthetic aspects successful from the base to the drip-tip.

Sylvie.I

(c) Copyright Le Vapelier SAS 2014 - Only full reproduction of this article is authorized - Any modification of any kind is totally prohibited and infringes the rights of this copyright.

Print Friendly, PDF & Email
Com Inside Bottom
Com Inside Bottom
Com Inside Bottom
Com Inside Bottom

About the Author