Header
IN SHORT:
Ultimo by Joyetech
Ultimo by Joyetech

Ultimo by Joyetech

 

Commercial characteristics

  • Sponsor having loaned the product for the magazine: Happe Smoke
  • Price of the tested product: 29.9 Euros
  • Product category according to its selling price: Entry level (from 1 to 35 euros)
  • Atomizer Type: Clearomizer
  • Number of resistances allowed: 1
  • Resistor Type: Non-Rebuildable Temperature Controllable Owners, Reconstructible Micro Coil, Reconstructible Micro Coil to Temperature Control
  • Supported Bit Type: Cotton, Fiber Freaks Density 1, Fiber Freaks Density 2, Fiber Freaks Yarn 2 mms, Fiber Freaks Cotton Blend
  • Quantity in milliliters announced by the manufacturer: 4

Reviewer comments on business characteristics

Joyetech's Ultimo is a small Clearomizer that does not look like much. Under his appearances of classic atomizer, it is a real cloud maker since it will accept to function properly only from 40W. Yes, sir wants power!

Voilà Joyetech offers us a product really easy to use to associate with the new box market, always more powerful. But be careful, because with a capacity of 4ml, you can quickly run out of liquid.

This Ultimo is associated with three types of different resistances, the pack as it is received contains only two of 0.5Ω, but they allow you to vaper between 40 and 80Watts for that in Ceramics or 50 to 90Watts for that realized in clapton. These are proprietary MG resistors that simply screw up on the base.

ultimo_resistances

There is therefore a third proprietary resistance type NotchCoil (stainless steel or Stenless Steel), which meanwhile a value of 0.25Ω and which supports a power of 60 80Watts or temperature control (to be preferred). This versatile atomizer can also change the color of its joints (white, black, blue or red) and metamorphose into rebuildable since there is a MG RTA plate, sold separately, to adapt resistances in NotchCoil or rebuild by your care.

ultimo_mg_rta

What is good about this atomizer is that it is not very expensive and that it allows vapers who would not dare to get into the cloud, to access it at lower cost.

But let's first test this little new to know if the bet on the steam is held and if the flavors are correct.

KODAK Digital Still Camera

Physical characteristics and felt quality

  • Width or Diameter of the product in mms: 22
  • Length or height of the product in mms as it is sold, but without its drip tip if it is present, and regardless of the length of the connection: 39
  • Weight in grams of the product as sold, with its drip tip if it is present: 42
  • Material composing the product: Stainless steel, Pyrex
  • Form Factor Type: Kayfun / Russian
  • Number of component parts without screws and washers: 6
  • Number of threads: 4
  • Quality of the threads: Very good
  • Number of O-rings, Dript-Tip excluded: 4
  • Quality of O-rings present: Good
  • O-ring positions: Drip-Tip Connection, Top Cap - Tank, Bottom Cap - Tank, Other
  • Capacity in milliliters actually usable: 4
  • Overall, do you appreciate the quality of manufacture of this product with regard to its price? Yes

Rating of the vapelier as to feelings quality: 4.9 / 5 4.9 5 out of stars

Reviewer's comments on physical characteristics and perceived quality

Standard size, the pyrex is widely exposed and not especially very thick. At first glance, this clearomizer looks similar to others in the "clearo" style, except that the MG resistors have a very large diameter and are screwed onto the chimney, giving the Ultimo a rebuildable appearance.

KODAK Digital Still Camera

All stainless steel, each part is strong enough to complete its role without deforming.

The airflow is on the base and rotates properly with good support. Two stops on both sides make it possible to have the two openings completely open or totally closed. Between them they can be adjusted more precisely. The pine is fixed and can not be adjusted, but I doubt that this is a problem.

KODAK Digital Still Camera

The threads are perfect, the grip is done quickly without flinching, as for the joints, they offer a seamless seal, to a point where it was difficult for me to remove the pyrex from the top-cap, but it was done without damage to change the color of my joints.

On the bell, a simple but clean engraving, displays the name of the atomizer: ULTIMO

KODAK Digital Still Camera

A very correct set for the price.

KODAK Digital Still CameraKODAK Digital Still Camera

 

Functional features

  • Connection type: 510
  • Adjustable positive plot? No, a flush mount can only be guaranteed through an adjustment of the positive pad of the battery or the mod on which it will be installed
  • Presence of air flow regulation? Yes, and variable
  • Diameter in mms maximum of the air regulation possible: 10
  • Minimum diameter in mms of the air regulation possible: 0.1
  • Air regulation positioning: Lateral positioning and benefiting resistors
  • Spray chamber type: Conventional / Wide
  • Heat dissipation of the product: Normal

Reviewer's comments on functional features

The functions of this atomizer are just obvious, it's a "Performer".

Easy to use, it works with MG proprietary resistors. These resistors are a novelty in the field of clearomizers, because not only they have a diameter as wide as a conventional atomizer tray but also they can vape on very large powers. Three types of resistors can be used:

- The MG Clapton 0.5Ω supplied in the kit, works on powers ranging from 40 to 90W.
- The MG Ceramic 0.5Ω supplied in the kit, works on powers ranging from 40 to 80W. This resistor can also be used in temperature control on the parameters of Ni200 (Nickel)
- The MG QCS (NotchCoil) 0.25Ω NOT supplied in the kit, works on powers ranging from 60 to 80 Watts. This resistance can also be used in temperature control on the parameters of SS316L (Stainless steel or stainless steel)

Powerful this Ultimo allows to provide an impressive steam for powers above 40W and up to 90W without problem.

The rendering is also an asset for this product that knows how to reconcile brilliantly flavor and steam.

The simplicity of use is just amazing and even allows to change resistance when the tank is full.

The look can be modified via 4 available seal colors and this atomizer can also be used in rebuildable with a MG tray, sold separately around 7 Euros.

Drip-Tip Features

  • Type of attachment of the drip-tip: Owner but passage to the 510 possible
  • Presence of a Drip-Tip? Yes, the vaper can immediately use the product
  • Length and type of drip-tip present: Short
  • Quality of the present drip-tip: Good

Reviewer's comments on the Drip-Tip

Two proprietary drip-tips are provided with the Ultimo, but in reality it is rather a top-cap with a short chimney that acts as a support for the two cylinders provided that fit on it. One is stainless steel and the other black plastic. They have a diameter of 12mm which allows to vape on big powers and dissipates the heat correctly which is not higher than another atomizer, even to 80W.

However, if you remove the cylinder, it is possible to fit a drip-tip of your choice that corresponds to an 510 connection, but this will reduce the output and therefore the steam may rise in temperature.

KODAK Digital Still Camera

Evaluation of the packaging

  • Presence of a box accompanying the product: Yes
  • Would you say that the packaging is up to the price of the product? Yes
  • Presence of a user manual? Yes
  • Is the manual understandable for a non-English speaker? Yes
  • Does the manual explain ALL features? Yes

Vapelier's note on packaging: 5 / 5 5 5 out of stars

Reviewer's comments on conditioning

The packaging is perfect, what more?

The box is classic white cardboard, relatively solid. The set atomizer is protected by a foam, it is already equipped with a proprietary resistance Clapton and associated with a very complete user manual. There is also a small box that contains many accessories:

- An additional pyrex tank
- A 0.5Ω ceramic MG resistor
- A black plastic cylinder to change the drip-tip
- 3 additional sets of gaskets to modify the appearance of the atomizer (black, blue, red) + small spare gaskets for sealing the resistors and cylinders.

Note that the record is complete with sufficient explanations that are translated into several languages: English, French, German, Spanish, Italian and Greek.

Fabulous packaging, we could not hope better

KODAK Digital Still CameraKODAK Digital Still Camera

Appreciations in use

  • Transport facilities with mod of test configuration: Ok for an inside jacket pocket (no deformations)
  • Disassembly and cleaning facilities: Super simple, even blind in the dark!
  • Filling facilities: Super simple, even blind in the dark!
  • Easy to change resistors: Super simple, even blind in the dark!
  • Is it possible to use this product throughout the day with several vials of EJuice? Yes perfectly
  • Was there leak after one day of use? No
  • In the event of leaks during the tests, descriptions of the situations in which they occurred:

Vapelier's note on ease of use: 5 / 5 5 5 out of stars

Reviewer's comments on the use of the product

Composed of few parts, you just need to screw one of the resistors on the base, then screw the bell and the tank, fill with liquid, taking care to close the airflow beforehand and finally close the atomizer by screwing the top-cap. Open the airflow, wait a few minutes for the wick to soak up then… you can vape!

ultimo_montage

KODAK Digital Still Camera

I tested the first 0.5Ω clapton resistor: once the capillary was well soaked, at 40W I had very slight gurgling, when increasing the power, this small clogging quickly disappears. At 90W, the clearo holds the shock very well, it's impressive! But I find that the atomizer heats up a bit too much and the liquid doesn't have good flavors. On the other hand I stuck to 63W, the power seems ideal and provided a very dense vapor, the liquid is moderately heated and the flavors are despite the power, well restored. It is certainly on this last performance that the Ultimo impressed me a lot besides the fact that on each value range, I had neither dry hits nor leaks.

Be careful when using a minimum double battery box and keep a good vial of liquid near you, because the consumption is huge, it is still an alternative to that with the second ceramic resistance of 0.5Ω. Although this resistance is given for powers between 40 and 80W, after my test, I can assure you that everything works perfectly for a restoration of the flavors even better than the clapton. But by experience and after having tested the "ceramic" for a long time, the material is fragile and the successive heatings can prematurely crack the coil.

This material works perfectly with the temperature control by positioning on nickel (Ni200), it provides a very thick and just lukewarm vapor, for a coil preserved temperatures too high. I set the power to 57W with a temperature of 210 ° C, the recovery of flavors was excellent and the general consumption, both on batteries and on the liquid is really less important. An ideal vape has privileged.

I did not have the opportunity to test the QCS NotchCoil proprietary resistance which is stainless steel, but with a value of 0.25Ω, it will be better to use also the temperature control on the SS316L (Stainless Steel), for a better performance.

The only downside is that it will be difficult to use this product mod mod that will, certainly, hard to follow.

Recommendations for use

  • What type of mod is it advisable to use this product with? Electronic
  • What mod model is it recommended to use this product with? a box with a power of up to 75W
  • With which type of EJuice is it advisable to use this product? All liquids without problem
  • Description of the test configuration used: Ultimo + Therion + variable powers and temperature control
  • Description of the ideal configuration with this product: The use of the ceramic resistance in CT with the Ni200 setting

was the product liked by the reviewer: Yes

Overall average of the Vapelier for this product: 5 / 5 5 5 out of stars

Link to a video review or blog maintained by the reviewer author of the review

The mood ticket of the reviewer

Here it is undeniable, this Ultimo really plays in the big leagues to compete with the best rebuildables of the market in subohm and high power, while offering the ease of use of a Cleraomizer.

When I speak of high power, it is around 60w that it works best with a Clapton which provides up to 90W, a monstrous vapor with an average rendering, as well as a very important liquid and battery consumption.

The ceramic resistor is in my opinion the most suitable provided it is used in temperature control to 57W and 210 ° C on nickel (Ni200) to obtain a very good rendering and a warm vapor, so far the steam is still important, on the other hand the consumption of the battery and the liquid will be much better mastered.

No dry hit, no leak, very simple use for direct inhalation. Modular with 4 colors (transparent, black, red blue) possible joints and two different drip-tip colors (SS or black) and the possibility to vaper in stainless steel with proprietary resistance QCR sold separately as the base MG RTA which modifies this Ultimo rebuildable for a very good overall price.

An incredible performance, which not only requires me to grant an ato top to this clearomiser, but also seduced me to the point of acquiring it to dethrone my Aromamiser.

Sylvie.I

(c) Copyright Le Vapelier SAS 2014 - Only full reproduction of this article is authorized - Any modification of any kind is totally prohibited and infringes the rights of this copyright.

Print Friendly, PDF & Email
Com Inside Bottom
Com Inside Bottom
Com Inside Bottom
Com Inside Bottom

About the Author