Header
IN SHORT:
Trinity V2 BF by Galactika
Trinity V2 BF by Galactika

Trinity V2 BF by Galactika

 

Commercial characteristics

  • Sponsor having loaned the product for the magazine: Phileas Cloud
  • Price of the tested product: 110 Euros
  • Product category according to its selling price: Luxury (over 100 euros)
  • Atomizer Type: Dripper Bottom Feeder
  • Number of resistances allowed: 2
  • Resistance Type: Classic Reconstructible, Rebuildable Micro Coil, Reconstructible Classic Temperature Controlled, Rebuildable Micro Coil with Temperature Control
  • Supported Bit Type: Cotton, Fiber Freaks Density 1, Fiber Freaks Density 2, Fiber Freaks Yarn 2 mms, Fiber Freaks Cotton Blend
  • Quantity in milliliters announced by the manufacturer: 0,2

Reviewer comments on business characteristics

Galactika's Trinity V2 is a small flavor-oriented dripper made entirely of stainless steel with three fins on the top of the tank, and the design on the body gives it a beautiful look that differs from the sleek simplicity of most of its peers .

It can be mounted in single or double coil thanks to a variable airflow which is however quite limited for a low to medium aeration.

This Trinity V2 is sold with a second ceramic cap, white, equipped with a wider drip-tip and for good reason, its fixed double airflow, is a little wider than the previous one, which requires the assembly of a double resistance. But there too, although we have the possibility of increasing the power, this opportunity remains limited. However the well cleared plate has two pads on which the air-wires are really wide to accommodate large assemblies.

This dripper has a running diameter of 22mm to feel good on most tubular mods, it has above all a BF pin drilled in its center to associate it with a box of the same type, Bottom Feeder, which gives it a good autonomy without worrying about filling the tank.

 

Physical characteristics and felt quality

  • Width or Diameter of the product in mms: 22
  • Length or Height of the product in mms as sold, but without its drip-tip if it is present, and regardless of the length of the connection: 23 and 17 for the ceramic cap
  • Weight in grams of the product as sold, with its drip-tip if it is present: 40 and 25 grs for the ceramic cap
  • Materials composing the product: Delrin, stainless steel and ceramic for the second cap
  • Form Factor Type: Kayfun / Russian
  • Number of component parts without screws and washers: 4
  • Number of threads: 1
  • Quality of the threads: Excellent
  • Number of O-rings, Drip-Tip excluded: 2
  • Quality of O-rings present: Very good
  • O-ring positions: Drip-Tip Connection, Bottom-Cap - Tank
  • Capacity in milliliters actually usable: 0.2
  • Overall, do you appreciate the quality of manufacture of this product with regard to its price? Yes

Rating of the vapelier as to feelings quality: 5 / 5 5 5 out of stars

Reviewer's comments on physical characteristics and perceived quality

One tray for two different looks. this ato has a thin apparent base of two millimeters, leaving visible the same three engravings inscribed on it, all around, in capital letters: "TRINITY V2". Everything is stainless steel, the tray is reduced to a diameter of 18mm, with two large but not very high studs since each has an air-wire of oval shape in the width direction, which measures 3,5mm x 2mm. In other words, there is room for the resistive! The tabs of the resistors are blocked by a CHC screw (Cylindrical Hexagonal Hollow or called BTR) on the side of the stud which perfectly maintains all the diameters of son without difficulty and without breaking them.

 

 

There is no proper tank. But a thin border on which is placed the airflow base for the SS cap, to prevent leaks. So be careful not to overfill the tray, pressing the liquid by the pump, under penalty of overflow. This airflow ring has three sets of three identical holes, small enough to be positioned according to the use of a double or a single coil and is adjusted by affixing the cap on top.

 

 

The weight of this SS dripper is significant for this format with 40grs, which is to say if the material is not lacking since in addition, it is only 23mm high without drip-tip. The inside of the cap is machined in the shape of a dome to obtain an excellent mixing between steam and air and a total flow of the condensed drops towards the tank. It is the same for the internal shape of the ceramic cap which is even smaller, with 17mm height.

 

 

The style of this TinityV2 changes drippers that we used to rub shoulders. Its height is well reduced in height as its room on the inside. The exterior has on the top of the atomizer, three fins that not only offer a nice aesthetic but help dissipate heat. In addition, the body of course is engraved all around horizontal lines that form waves and gives it a beautiful look.

 

 

In contrast, the white ceramic tank is completely smooth is shiny. It contrasts and goes frankly with the black dip-tip and the thin SS base. This cap already reduced, does not require the airflow adjustment ring and therefore becomes fixed. This cap seems fragile, a little less than glass because it is thicker, but I advise you not to drop it and to handle it with care.

 

 

All in all a perfect machining, a lot of material and a look fins that contribute to the dissipation of heat, with joints well adapted and of quality, for a maintenance of the course which is assured correctly on the two models.

Functional features

  • Connection type: 510
  • Adjustable positive plot? No, a flush mount can only be guaranteed through an adjustment of the positive pad of the battery or the mod on which it will be installed
  • Presence of air flow regulation? Yes, and variable
  • Maximum diameter in mms of the air regulation possible: 6 in SC - 12 in DC
  • Minimum diameter in mms of the air regulation possible: 0.1
  • Air regulation positioning: Lateral positioning and benefiting resistors
  • Atomization chamber type: Bell type
  • Heat dissipation of the product: Normal

Reviewer's comments on functional features

The Trinity V2 is clearly flavor oriented, thanks to its reduced atomization chamber (with the airflow ring) but also thanks to the internal shape of the caps which form a dome to better direct the vapor and facilitate obtaining a homogeneous emulsion to concentrate the aromas.

 

 

In single coil, the cap SS will be the only one to be used, because the airflow can be set on one side, by a series of three small holes (Ø = 3 X 2mm max).

 

 

In double coil you have the choice of caps, stainless steel or ceramic, however, the choice of ceramic imposes a medium fixed airflow and is the most aerial of the two. Although the direct inhalation can be done without difficulty, the two air-holes cyclopes type only 3,5mm x 2mm, the same dimension as that of the air-wires. Therefore the cloud chasing will be limited.

It's a bit of a shame because the board offers great mounting possibilities thanks to its sleek deck and the large holes on the pedestals which allow to adapt large assemblies, which cannot be exploited to the maximum.

 

 

The heat is properly dissipated as the power is restricted by the airflow. The BF pin allows to mount this dripper on a box adapted to this type of operation but it remains fixed and does not give the possibility to be flush in all cases.

 

 

 

Drip-Tip Features

  • Attachment type of the drip-tip: 510 for the stainless steel cap and owner for the ceramic cap
  • Presence of a Drip-Tip? Yes, the vaper can immediately use the product
  • Length and type of drip-tip present: Medium
  • Quality of the present drip-tip: Good

Reviewer's comments on the Drip-Tip

Two drip-tips in black Delrin are delivered, one on the SS cap with a current 510 connection and a small opening. The other on the ceramic cap which is rather a drip-top with a wide opening and a proprietary connection.

Both have a straight form without embellishment they are simple and common but offer comfort in the mouth that is pleasant.

 

Evaluation of the packaging

  • Presence of a box accompanying the product: Yes
  • Would you say that the packaging is up to the price of the product? Can do better
  • Presence of a user manual? No
  • Is the manual understandable for a non-English speaker? No
  • Does the manual explain ALL features? No

Vapelier's note on packaging: 1.5 / 5 1.5 5 out of stars

Reviewer's comments on conditioning

Packaging is very original, in a transparent Plexiglas cubic box, a hinge opens the box in which is a blue tulle bag, protecting the Trinity V2. Beside it a more common bag closes the ceramic cap in a protective net, all accompanied by an Allen key.

None of the instructions are attached, only a sticker with the image of Galactika is stuck on the opening hatch of the box.
A packaging probably nice but that is not up to the price!

 

Appreciations in use

  • Transport facilities with the mod of the test configuration: Ok for a side pocket of Jean (no discomfort)
  • Disassembly and cleaning facilities: Super simple, even blind in the dark!
  • Filling facilities: Super simple, even blind in the dark!
  • Easy to change resistors: Easy but requires a workspace to lose nothing
  • Is it possible to use this product throughout the day with several vials of EJuice? Yes perfectly
  • Was there leak after one day of use? No
  • In the event of leaks during the tests, descriptions of the situations in which they occur:

Vapelier's note on ease of use: 4.4 / 5 4.4 5 out of stars

Reviewer's comments on the use of the product

The use is very simple, because the plate is large enough to make your resistance but the diameter of it restricts the coil diameter to 3mm.

In single coil, you can only use the stainless steel tank since it offers the possibility of adjusting the airflow directly on the resistance. But be careful, because the opening is made for a value of about 1Ω, the sub-ohm is not recommended. The air-wires being very wide, whatever the wire used, it will pass without difficulty and the CHC screws of the studs, provide excellent support without risk of breaking when tightening.

 

 

The double coil can be used with the SS or ceramic cap knowing that the ceramic one offers a greater aeration but slightly limits the assembly.

 

 

Overall, the restitution of flavors is at the rendezvous, the aromas are concentrated and sweet liquids have a rounder appearance in the mouth but I regret not having a plateau in line with the caps that are not made for the cloud.

The Bottom Feeder is a style of vape, we like it or not, the fact is that most BF boxes have no adjustment for this screw breakthrough (pin positive) and flush editing is in this case, unlikely.

 

 

Recommendations for use

  • With which type of mod is it advisable to use this product? Electronics AND Mechanics
  • Which mod model is it recommended to use this product with? an electro or meca BF box
  • With which type of EJuice is it advisable to use this product? All liquids without problem
  • Description of the test configuration used: Tested with a meca box Vega Cloud Box v2.1 in double coil and simple
  • Description of the ideal configuration with this product: with an adapted box with the Bottom Feeder system

was the product liked by the reviewer: Bof, it's not the craze

Overall average of the Vapelier for this product: 4 / 5 4 5 out of stars

Link to a video review or blog maintained by the reviewer author of the review

 

The mood ticket of the reviewer

The Trinity V2 is a nice dripper with an aesthetic worked on the stainless steel tank or a graceful and shiny white ceramic material with the second cap provides. Its pace changes basic cylinders that we usually rub shoulders.

Versatile, it works with a simple or a double coil easy to assemble, but each stud shares the maintenance of resistances on each side with a single large air-wire.

The BF pin adapts perfectly to associate with a box of the same type, but does not always allow flush mounting, even if it does not affect its operation.

The quality of this little dripper is superb with an unusual weight of 40grs for a dripper of this format. This is to say if the product is robust and well in "flesh".

An atomizer essentially designed to taste your juices and take pleasure in vaping flavored liquids little loaded with vegetable glycerin, because despite the ceramic cap which provides a wider airflow than the stainless steel cap, the vape remains tight to medium, limiting the cloud chasing. It is however a shame, since the capacities of its tray offer wider possibilities, as for its price, it is in my opinion too high for such a product.

Sylvie.I

(c) Copyright Le Vapelier SAS 2014 - Only full reproduction of this article is authorized - Any modification of any kind is totally prohibited and infringes the rights of this copyright.

Print Friendly, PDF & Email
Com Inside Bottom
Com Inside Bottom
Com Inside Bottom
Com Inside Bottom

About the Author