Toptank mini by Kangertech [Flash Test]

A. Commercial specifications

• PRODUCT NAME: toptank mini
• BRAND: kangertech
• PRICE: 39.90
• CATEGORY: Clearomizer
• RESISTANCE: Simple rebuildable coil

B. Data sheet

• WIDTH OR DIAMETER OF THE PRODUCT: 22
• ATOMIZER HEIGHT WITHOUT SOUND DRIP-TIP: 45
• WEIGHT: 45
• DOMINANT MATERIAL: Stainless steel
• CONNECTION TYPE: 510
• AIRFLOW: Variable from tight to overhead
• SETTING THE CONNECTION: Fixed

C. Packaging

• QUALITY OF PACKAGING: Very good
• PRESENCE OF A NOTICE: Yes

D. QUALITIES AND USE

• Overall quality: Very good
• Quality of rendering: Very good
• Stability of the rendering: Very good
• Ease of implementation: Very easy

E. Conclusions and comments of the Internet user author of the review

The packaging of the product is very qualitative. The toptank mini is delivered with a resistance ssocc0.5, a ssocc0.15 and a mini rba plus plate (rebuildable plate). We also find in the pack a little cotton, a coil, 4 screws and a screwdriver. The rba tray is supplied with a pre-assembled coil. There is more than to put a wick to start. Small not insignificant detail, there is no longer a second tank provided.
So much for the contents of the box. Classic with everything you need.

The supplied drip-tip is teflon (I'm not a fan, I prefer metal) with a wide opening ideal for direct inhalation.

The top of the tank is unscrewed to fill the clearomizer from the top (no need to dismantle everything to fill) which leaves a very wide opening (you can fill without a pipette). The tank is made of fairly thick pyrex as well as the gaskets provided.

The air-flow is double, provided with a notched rotating ring which allows to choose 1 small hole, 1 medium hole or a cyclops. So there is a good variety of settings that range from tight to air. Personally, I use the Cyclops which is really great for the volume of vapor and which corresponds well to my type of vape.

The base and the pedestal are very well made. All the threads are of good quality.

For the resistance part, you can use all occ and ssocc resistors from kangertech. For my part, I used the Ni200 0.15 ohm in temperature control which works very well and I bought in addition a 0.5 ohm clapton coil kanthal resistance to use in wattage mode. It's really great in restoring flavors and at 30w it starts to send a lot of steam. Below 25w, it is a bit “diesel”, it takes time to heat up but this is normal. From 28 / 29w it works really well.

For the rba mini plus chainring, I haven't used it yet but it is very well machined, the air-flow is substantial and there is room around the fixing screws to go around it with the leg of the coil.

Let's talk a little about feeling during the vape:
- the hit is pronounced in 6mg of nicotine (we can lower the nicotine level if this is not the desired effect).
- the volume of vapor is very large (especially with the clapton coil resistance and the air-flows fully open).
- the restitution of flavors is really nice. I tried it with the Raspberry Green Vape (60% PG; 40% VG) and Alien Vision Pg Hype (90% VG) and in both cases it's really great.

In conclusion, this is very good material. The materials used are of very good quality, the design is nice, a very qualitative visual. The use is super simple with the filling from the top and the possibility of going from a manufacturer resistance to the rba plate by unscrewing the lower part. The volume of steam is very important and the restitution of flavors is really nice. In short, a top product paid for € 39.90 in a shop near me that you can find around € 38.90 on online sales sites.

I strongly advise.

Note from the user author of the review: 4.5/5

(c) Copyright Le Vapelier SAS 2014 - Only full reproduction of this article is authorized - Any modification of any kind is totally prohibited and infringes the rights of this copyright.