Commercial characteristics
- [/ if] Price of the tested product: 129 Euros
- Product category according to its selling price: Mid-range (from 36 to 70 euros)
- Atomizer type: Classic rebuildable
- Number of resistances allowed: 1
- Resistor Type: Classic Reconstructible, Rebuildable Micro Coil
- Type of wicks supported: Silica, Cotton
- Quantity in milliliters announced by the manufacturer: 5
Reviewer comments on business characteristics
.
Physical characteristics and felt quality
- Width or Diameter of the product in mms: 23
- Length or height of the product in mms as it is sold, but without its drip tip if it is present, and regardless of the length of the connection: 57
- Weight in grams of the product as sold, with its drip tip if it is present: 93
- Material composing the product: Steel
- Form Factor Type: Kayfun / Russian
- Number of component parts without screws and washers: 5
- Number of threads: 2
- Quality of the threads: Very good
- Number of O-rings, Dript-Tip excluded: 3
- Quality of O-rings present: Very good
- O-ring positions: Top Cap - Tank, Bottom Cap - Tank, Other
- Capacity in milliliters actually usable: 4
- Overall, do you appreciate the quality of manufacture of this product with regard to its price? Yes
Rating of the vapelier as to feelings quality: 4.8 / 5 
Reviewer's comments on physical characteristics and perceived quality
The Taifun GT offers a flawless manufacturing quality and finish.
This reconstructable atomizer is a model of simplicity for your assemblies, in fact the ring of the atomization chamber can be lowered or removed if you wish. Leaving room for your resistance.
Functional features
- Connection type: 510
- Adjustable positive stud? Yes, through an adjustment by thread, the assembly will be flush in all cases
- Presence of air flow regulation? Yes, but fixed only
- Diameter in mms maximum of the air regulation possible: 1.5
- Minimum diameter in mms of the air regulation possible: 1.2
- Positioning of the air regulation: From below and benefiting the resistances
- Atomization chamber type: Bell type
- {Heat dissipation of the product: Normal
Reviewer's comments on functional features
The air flow arrives below your resistance, you can play on the distance of this one to either improve the hit, or for the production of vapor.
Note that the basic airflow is 1.2mm, it can be changed by a tube sold separately, to pass it to 1.5mm
Drip-Tip Features
- Drip tip type: 510 Only
- Presence of a Drip-Tip? Yes, the vaper can immediately use the product
- Length and type of drip-tip present: Short with heat evacuation function
- Quality of the drip-tip present: Very good
Reviewer's comments on the Drip-Tip
The drip-tip is very well made, and very pleasant. The machining of stainless steel is perfect here.
Evaluation of the packaging
- Presence of a box accompanying the product: Yes
- Would you say that the packaging is up to the price of the product? Yes
- Presence of a user manual? No
- Is the manual understandable for a non-English speaker? No
- Does the manual explain ALL features? No
Vapelier's note on packaging: 2 / 5 
Reviewer's comments on conditioning
The box is very beautiful, the Taifun GT is in a case, note that it is supplied with:
- 1 meter of 2mm glass filbre
- 1 meter of 0,2mm nichrome resistive wire
We regret the absence of a manual or diagram.
Appreciations in use
- Transport facilities with the mod of the test configuration: Nothing helps, requires a shoulder bag
- Disassembly and cleaning facilities: Easy but requires a workspace
- Filling facilities: Easy, even standing in the street
- Easy to change resistors: Easy but requires a workspace to lose nothing
- Is it possible to use this product throughout the day with several vials of EJuice? Yes perfectly
- Was there leak after one day of use? No
- In the event of leaks during tests, descriptions of the situations in which they occurred
Vapelier's note on ease of use: 3.1 / 5 
Reviewer's comments on the use of the product
The Taifun GT is a fairly simple atomizer, but requires time to complete the ideal assembly.
Indeed, having made resistors in 1.5mm and 2mm in diameter, placed the resistance more or less high in the room, and more or less cotton, we will have to persevere for the amount of cotton, because either you will have gurgles and therefore an airflow leak, or either it will be too dry.
Also, depending on the viscosity and the amount remaining in the tank, there may be occasional gurgles and leaks.
Condensation in the chimney being inevitable, the liquid will fall by gravity in the room, and therefore from time to time the same phenomenon will occur.
Don't panic, you just have to put the atomizer upside down, shoot with the mod, and blow through the airflow hole, this will remove the excess liquid, unless your assembly is not good ... 🙂
Recommendations for use
- What type of mod is it advisable to use this product with? Electronic
- With which mod model is it advisable to use this product? Dicodes mods, or box mods, or any other mod with a smooth signal
- With which type of EJuice is it advisable to use this product? All liquids without problem
- Description of the test configuration used: Taifun GT at 1.7oHms, cotton microcoil on 2mm in diameter, Pipeline Pro adjusted from 12w to 14w + IPv3 adjusted from 14w to 15w, liquids in 60/40, 50/50, 20/80
- Description of the ideal configuration with this product: cotton microcoil on 1.5mm to 2mm in diameter, resistance of 1.2Ohms to 1.8Ohms + a good electronic mod, liquids in 50/50, not to exceed 15w
was the product liked by the reviewer: Yes
Overall average of the Vapelier for this product: 3.7 / 5 
Link to a video review or blog maintained by the reviewer author of the review
The mood ticket of the reviewer
Despite its age, the Taifun GT is still a reference in the world of vaping.
Its excellent rendering of aromas, its ease of assembly, and its manufacturing quality make it a must have!
We regret the diameter in 23mm.
Plexiglass allows the use of certain corrosive liquids, but within certain limits. You will have to be careful in the event of a fall because it is not unbreakable.
Good news for iron breakers, there is a fully stainless steel tank, which will offer strength and resistance to the most corrosive liquids, while giving another aspect to your setup. (this is the model I use every day), the faults will be that you will no longer see the fluid level but also the weight!
There is also a surprising accessory, a dripper kit to transform this atomizer!
Everything is removable for deep cleaning and maintenance kits are available.
The positive stud is adjustable thanks to a crusiform screw held in place by a spring, and it is very rare to have contact concerns.
Note that it is possible to have a drop of liquid on the positive pad, but do not worry, it will never be the flood!
(c) Copyright Le Vapelier SAS 2014 - Only full reproduction of this article is authorized - Any modification of any kind is totally prohibited and infringes the rights of this copyright.
