Commercial characteristics
- Sponsor having loaned the product for the magazine: Youvape
- Price of the tested product: 89.9 Euros
- Product category according to its selling price: High end (from 71 to 100 euros)
- Atomizer Type: Single Bowl Dripper
- Number of resistances allowed: 2
- Resistor Type: Rebuildable Micro coil, Reconstructable Classic Temperature Controlled, Rebuildable Micro coil temperature control
- Type of wicks supported: Silica, Cotton, Ekowool
- Quantity in milliliters announced by the manufacturer: 0.5
Reviewer comments on business characteristics
The Succubus is a beautiful dripper consisting of 5 pieces. His tank is available in various colors: black, copper, gold or stainless steel.
At 89, 90 € is a high-end product that allows you to make monstrous clouds.
Its air flow capacity is quite exceptional and its plate provided with a double positive and negative stud allows an assembly up to 4 resistors.
It comes with a large diameter Delrin top cap and a more basic second top cap with a 510 drip tip.
Physical characteristics and felt quality
- Width or Diameter of the product in mms: 22
- Length or height of the product in mms as sold, but without its drip tip if it is present, and regardless of the length of the connection: 28 (without drip-tip) or 32 with the top in derlin
- Weight in grams of the product as sold, with its drip tip if it is present: 34
- Material composing the product: Stainless steel, Copper, Delrin
- Form Factor Type: Kayfun / Russian
- Number of component parts without screws and washers: 5
- Number of threads: 3
- Quality of the threads: Very good
- Number of O-rings, Dript-Tip excluded: 2
- Quality of O-rings present: Good
- O-ring positions: Drip-Tip Connection, Bottom Cap - Tank
- Capacity in milliliters actually usable: 0.5
- Overall, do you appreciate the quality of manufacture of this product with regard to its price? Yes
Rating of the vapelier as to feelings quality: 4.9 / 5 
Reviewer's comments on physical characteristics and perceived quality
The Succubus of my test is made of copper and stainless steel. Besides the fact that this copper oxidizes very quickly, its cleaning is simple and fast
The machining quality is superb, the marks made by the tool are barely visible and yet with a protruding bowl and air-flow, it must not have been obvious.
This tray is equipped with 4 plots (2 positive and 2 negative) so you can do your editing more easily and blocking the wire is done with screws for flat screwdriver, which is more convenient.
The engravings on the tank of the atomizer are really sublime, with one side the name of the atomizer "SUCCUBUS" and the other a devil sits holding his forked tail. The details are stunning. For the serial number under the tray, it too has been engraved with great attention.
The pin is good for good contact even if the screw allows adjustment for flush mounting.
The top cap is in two parts. One in stainless steel which is not fully open but rather with a star opening where the other part of the top-cap is screwed for a large Delrin drip-tip which is very comfortable in the mouth.
And the airflows, ideally placed under the resistors, are a nice surprise for this atomizer that offers a high capacity for juice retention.
Functional features
- Connection type: 510
- Adjustable positive stud? Yes, through an adjustment by thread, the assembly will be flush in all cases
- Presence of air flow regulation? Yes, and variable
- Diameter in mms maximum of the air regulation possible: 9
- Minimum diameter in mms of the air regulation possible: 0.1
- Positioning of the air regulation: Lateral positioning and / or from below to benefit the resistances
- Atomization chamber type: Bell type
- Heat dissipation of the product: Excellent
Reviewer's comments on functional features
The tray is perfectly functional with a very good work place. In addition, the studs have easy-to-use screws to block the tabs of the resistors.
At the level of the conductivity, I did not have any particular problem and the desired powers are sent as it is necessary.
The pin is adjustable for flush mounting, thanks to a screw.
The plate is hollowed out and allows a liquid reserve of 0.5 to 1ml, which is always appreciable on a dripper of this type because, in sub-ohm, we consume a lot of “fuel”.
In addition, this dripper features 12 air-flow holes of the same diameter by two sets of three on each side of the tank. So you have enough six holes in mounting your resistance but also from below. Which is rare on an atomizer. The airs-flow from below are protruding from the edge of the tray, therefore the liquid is not likely to return
The size of this atomizer may vary depending on the top cap used. With the drip-top having a large opening, you will have a size of 32mm which is relatively compact.
Drip-Tip Features
- Type of drip-tip attachment: Owner but passage to 510 through a supplied adapter
- Presence of a Drip-Tip? Yes, the vaper can immediately use the product
- Length and type of drip-tip present: Medium
- Quality of the drip-tip present: Very good
Reviewer's comments on the Drip-Tip
The drip-top is original and perfectly coordinated with the Succubus. Its Delrin material offers a comfortable use and I did not feel any sensation of heat with high powers.
Evaluation of the packaging
- Presence of a box accompanying the product: Yes
- Would you say that the packaging is up to the price of the product? Yes
- Presence of a user manual? No
- Is the manual understandable for a non-English speaker?
- Does the manual explain ALL features?
Vapelier's note on packaging: 3 / 5 
Reviewer's comments on conditioning
The conditioning is pretty. In a rigid cardboard round box, you find your atomizer, with an extra top cap equipped with a drip tip. You also have 1 plus seal and a screw for the studs in case of loss.
For a high-end product, a small foam on the bottom of the box would have been able to ensure consistent transport.
Appreciations in use
- Transport facilities with the mod of the test configuration: Ok for an external jacket pocket (no deformations)
- Disassembly and cleaning facilities: Easy but requires a workspace
- Filling facilities: Super simple, even blind in the dark!
- Easy to change resistors: Easy but requires a workspace to lose nothing
- Is it possible to use this product throughout the day with several vials of EJuice? Yes perfectly
- Was there leak after one day of use? No
- In the event of leaks during tests, descriptions of the situations in which they occur
Vapelier's note on ease of use: 3.5 / 5 
Reviewer's comments on the use of the product
Its size is a nice asset and its tank a definite advantage for this atomizer which is made for very low resistance so a big consumer of liquid.
Even with a high power, I had the pleasant surprise not to feel the heat of the coil on my lips thanks to the drip tip in Delrin (made of plastic and fiberglass) to both mitigate the heat and have a very stable material that does not deform.
But the best comes from the airflows which are positioned on either side of the resistance and below. This gives a huge vapor and at the same time delivers fabulous aromas, especially on sweet flavors which almost seem like concentrated. Obviously, this is only possible thanks to low resistances, with a Kanthal with a diameter greater than or equal to 0.4mm.
Recommendations for use
- With which type of mod is it advisable to use this product? Electronics AND Mechanics
- Which mod model is it recommended to use this product with? the meca INCUBUS box
- With which type of EJuice is it advisable to use this product? All liquids without problem
- Description of the test configuration used: 0.4 3 double coil 8mm support and 0.55 turns for XNUMX resistance Ω
- Description of the ideal configuration with this product: mounted on a mod electro with a large capacity of power
was the product liked by the reviewer: Yes
Overall average of the Vapelier for this product: 4.5 / 5 
Link to a video review or blog maintained by the reviewer author of the review
The mood ticket of the reviewer
The Succubus is a beautiful atomizer quality, its tank allows to have a sufficient reserve of juice not to dry his trio wick quickly because with these 12 airflow holes, it is made to vape Sub-ohm on large powers .
Two Delrin drips tips are offered with this atomizer, one having a maximum opening and the other having an 510 connection.
A little Filipino at once oriented for flavors and cloud chasing!
Sylvie.I
(c) Copyright Le Vapelier SAS 2014 - Only full reproduction of this article is authorized - Any modification of any kind is totally prohibited and infringes the rights of this copyright.
