Header
Header
Header
IN SHORT:
Presa TC 75W by Wismec
Presa TC 75W by Wismec

Presa TC 75W by Wismec

Commercial characteristics

  • Sponsor having loaned the product for the magazine: MyFree-Cig
  • Price of the tested product: 59.9 Euros
  • Product category according to its selling price: Mid-range (from 41 to 80 euros)
  • Mod type: Voltage and variable power electronics with temperature control
  • Is the mod telescopic? No
  • Maximum power: 75 watts
  • Maximum voltage: NC
  • Minimum value in Ohms resistance for a start: 0.1Ω in power and 0.05Ω in TC mode

Reviewer comments on business characteristics

The Presa is an electronic box that has all the assets to seduce.

Small, light and ergonomic, it offers a maximum power of 75 Watts. The temperature control can be used with nickel, titanium or stainless steel wire. To complete the panoply of the beautiful, it also incorporates the ByPass mode that allows you to use it as a mechanical box by inhibiting the chipset.

The ergonomics are perfect with a side switch completely integrated into the body of the mod, on which are inserted the screen, the two adjustment buttons and the location for the USB port.

The battery can be inserted without using a screwdriver since the cover is magnetic. The supplied USB port is used to recharge the battery or update the chipset. The pin is spring loaded, the switch is lockable and, finally, the screen is wide with a visualization of information that is ideally distributed.

A beauty that is offered in two colors, black or silver.

KODAK Digital Still Camera

Physical characteristics and felt quality

  • Product Width or Diameter in mms: 39.5 x 22
  • Product Length or Height in mms: 85
  • Product weight in grams: 115
  • Material composing the product: Aluminum
  • Type of Form Factor: Box mini - IStick type
  • Decorative style: Classic
  • Quality of decoration: Good
  • Is the coating of the mod sensitive to fingerprints? No
  • All components of this mod seem well assembled? Yes
  • Fire button position: Lateral near the top cap
  • Fire button type: Mechanical plastic on contact rubber
  • Number of buttons in the interface, including touch areas if they are present: 2
  • Type of user interface buttons: Mechanical plastic on contact rubber
  • Quality of the interface button (s): Good, not the button is very responsive
  • Number of parts in the product: 2
  • Number of threads: 1
  • Quality of the threads: Very good
  • Overall, do you appreciate the quality of manufacture of this product with regard to its price? Yes

Rating of the vapelier as to feelings quality: 4.4 / 5 4.4 5 out of stars

Reviewer's comments on physical characteristics and perceived quality

The Presa is beautiful and has a very ergonomic shape. The OLED screen is integrated into the concave shape switch with two adjustment knobs and USB port location

The material chosen for the body is aluminum, which makes it very light. The paint for the coating does not "pick up" the fingerprints. The design is refined, elegant and original.

The location for the atomizer is dug and allows to mount 22mm diameter atomizers without them mark your box by screwing them on.

The adjustment knobs are integrated in the switch and do not come out, being included in a cavity, which gives the Presa a perfect silhouette. The buttons do not move, do not rattle and are very responsive, as the side switch is perfectly stable and reacts to the pressure along its length.

The pin is spring-loaded and adapts very well to all atomizers to have a completely flush set-up.

Under the mod, there are three holes, cyclope type, which allow to circulate the air and only one on the hood that encloses the accumulator. This hood is held by four small magnets that are well suited.

The inscriptions on the OLED screen are clearly visible and it is not energy efficient despite its comfortable size.

A little star wisely dressed!

KODAK Digital Still Camera

KODAK Digital Still Camera

KODAK Digital Still Camera

Functional features

  • Type of chipset used: Owner
  • Connection type: 510, Ego - via an adapter
  • Adjustable positive plot? Yes, through a floating pine.
  • Lock system ? Electronic
  • Quality of the locking system: Excellent, the chosen approach is very practical
  • Features offered by the mod: Switching to mechanical mode, Display of the charge of the batteries, Display of the value of the resistance, Protection against short circuits coming from the atomizer, Protection against the reversal of polarity of the accumulators, Display of the Current vape voltage, Current vape power display, Vape time display of each puff, Fixed overheat protection of atomizer resistors, Variable overheat protection of atomizer resistors, Control temperature of the resistors of the atomizer, Supports the update of its firmware, Adjusting the display brightness
  • Accusability: 18650
  • Does the mod support stacking? No
  • Number of batteries supported: 1
  • Does the mod retain its configuration without batteries? Yes
  • Does the mod offer a recharge feature? Charging function possible via Mini-USB
  • Is the recharge function pass-through? Yes
  • Does the mode offer a Power Bank function? No power bank function offered by the mod
  • Does the mode offer other functions? No other function offered by the mod
  • Presence of a regulation of the flow of air? Yes
  • Maximum diameter in mms of compatibility with an atomizer: 22
  • Accuracy of the output power at full charge of the battery: Excellent, there is no difference between the requested power and the actual power
  • Accuracy the output voltage at full charge of the battery: Excellent, there is no difference between the requested voltage and the actual voltage

Vapelier's note regarding functional characteristics: 5 / 5 5 5 out of stars

Reviewer's comments on functional features

The functions offered by this box are numerous:

- Screen saver
- Key lock function
- Security lock
- Move the display mode to 180 °
- Operation in several modes: power from 1W to 75W (resistive Kanthal wire), temperature control with resistive wire in Nickel, Titanium or Stainless steel from 100 ° C to 315 ° C or 200 ° F to 600 ° F.
- Bypass function (mechanical mode)
- Control of the battery charge
- Puff counter
- Temperature protection
- Protection against the short circuit of the atomizer
- Protection against too low voltage
- Alert on the resistance too low
- Alert if the battery power is too low
- Floating pine
- Easy replacement of the battery (magnetic cover)
- Recharging the battery via the USB cable
- Air regulation

A very complete Presa, Wismec also provides you with an eGo adapter that allows you to mount atomizers with internal 510 connection

KODAK Digital Still CameraKODAK Digital Still Camera

KODAK Digital Still Camera

presa_accu

Evaluation of the packaging

  • Presence of a box accompanying the product: Yes
  • Would you say that the packaging is up to the price of the product? Yes
  • Presence of a user manual? Yes
  • Is the manual understandable for a non-English speaker? No
  • Does the manual explain ALL features? Yes

Vapelier's note on packaging: 4 / 5 4 5 out of stars

Reviewer's comments on conditioning

Regarding the packaging, you will receive your box in a solid box of cardboard, perfectly wedged in a foam under which you will find:
- A manual of use only in English,
- USB cable
- an eGo adapter

A complete packaging, at the height of its price, a pity that the record is not translated.

presa_packaging

Appreciations in use

  • Easy transportation with the test atomizer: Ok for an inside jacket pocket (no deformations)
  • Disassembly and cleaning facilities: Super simple, even blind in the dark!
  • Easy to change the batteries: Super simple, even blind in the dark!
  • Did the mod heat up? No
  • Has there been erratic behavior after one day of use? No
  • Description of situations in which the product has experienced erratic behavior

Vapelier's note in terms of usability: 5 / 5 5 5 out of stars

Reviewer's comments on the use of the product

The use is relatively simple and the record is not very long, as you translate it:

Power on / off : Switch on / off: Press the Switch five times

Stealth function: Screen Saver function. When the unit is turned on, hold down the switch and the left setting knob at the same time. So your screen stays off during use.

Key lock function : Key lock function. While the unit is on, simultaneously press both setting buttons. So you do not risk changing the preset values ​​accidentally. To unlock, simply repeat the same operation.

Safety lock switch : Security lock switch. Move the unlock switch to the right and to the left to lock the switch. Thus you do not risk to press the switch accidentally.

Switch the display mode : Change the display mode. It is possible to rotate the display of the screen when the Presa is off. By pressing the left and right adjustment buttons simultaneously, the display rotates by 180 °.

Shift between VW / Bypass / TC-Ni / TC-Ti Mode : Settings between VW / Bypass / TC-Ti mode TC-Ni mode. Press the 3 firing button once, the first line will flash to indicate that you are entering the menu. Press the right setting button to toggle between VW, By-pass, TC-Ni and TC-Ti mode

VW mode : The power mode can be set from 1W to 75W by pressing the right setting button to increase and to the left to decrease.

Bypass mode: the bypass mode is a direct output of the voltage. In this mode, the chipset is inhibited and your box works without electronics in the manner of a mechanical mod.

TC-Ni and TC-Ti mode : TC-Ni and TC-Ti mode: In TC mode, the temperature can be set from 100 ° C-315 ° C (or 200 ° F-600 ° F) with the setting buttons, the right to increase and the left to decrease.

1- power setting: press the switch 3 once to enter the menu. Press the left setting button and the second row will flash. Then press the right setting button to adjust the power and then press the switch to confirm.
2- Atomizer resistance display: This line indicates the reference resistance when the device is in standby and the real-time resistance when it is pressed.
3- lock / unlock the resistance of the atomizer: press the 3 switch once and enter the menu. Press the left adjustment button to lock or unlock the atomizer resistance.
Remark : lock the resistance only when the resistance is at room temperature (it has not heated up).

Display of the battery charge OR the puff counter:
Press the 3 switch once to enter the menu. Press the 3 setting button to the left and the fourth line to flash. Now, press the right setting button to toggle between the remaining charge and the actual number of puffs. To reset the puff counter, keep pressing the switch while the display is still flashing.

This is essentially the use on the record.

You can also update your chipset on the Wismec site at the following address: Wismec

The blocking of the resistance is only done when the resistance is at an ambient temperature. This function is very useful because, when using the temperature control, it has a variable value (and it is normal) however, by heating it tends to reset to approximate values. The blocking allows to have a permanent resistive value just.

What the manual does not tell us is that the temperature control can be used also with resistive wire made of stainless steel (Stainless Steel) and whose use is identical to that of resistive nickel or titanium. Your box will indicate the letter "S" on the first line of the screen.

The display of the battery charge and the puff meter is common. You can view one or the other according to your choice made during the setting.

The use is very simple, power is at the rendezvous and the box is not really energy-intensive. Whether on low or high power, the Presa is responsive and the values ​​are right. During my tests, I climbed up to 64W on a double-coil of 0.22Ω, the accumulator never heated. Temperature control on nickel and stainless steel (I have not tested Titanium), behaves very well.

presa_vapeur

Recommendations for use

  • Type of batteries used during the tests: 18650
  • Number of batteries used during testing: 1
  • With which type of atomizer is it advisable to use this product? Dripper, Dripper Bottom Feeder, A Classical Fiber, In Sub-ohm Mount, Genesis Rebuildable
  • With which model of atomizer is it advisable to use this product? anyone with a diameter of 22mm
  • Description of the test configuration used: With Aromamiser 1Ω, dripper Ni 0.2Ω and Haze tank double coil 0.22Ω
  • Description of the ideal configuration with this product: No ideal configuration

was the product liked by the reviewer: Yes

Overall average of the Vapelier for this product: 4.9 / 5 4.9 5 out of stars

Link to a video review or blog maintained by the reviewer author of the review

The mood ticket of the reviewer

With the Reuleaux with its DNA 200 and the Reuleaux RX200, Wismec offers the new Presa is no longer 40W, but comes equipped with a chipset that reaches the 75 Watts with a single battery, in a small size.

Its original shape is ergonomic with a concave side switch, incorporating screen, adjustment buttons and USB port and is triggerable over the entire length.

Beautiful, powerful, economical ... she has everything! Working perfectly in power mode, temperature control with nickel, titanium or stainless steel, it even gives you the possibility to vape like a mechanical mode with the Bypass.

Its switch can also be locked mechanically, difficult to find a single fault.

Wismec was really strong on this one!

Sylvie.I

(c) Copyright Vapelier SAS 2014 - Only the complete reproduction of this article is authorized - Any modification of any nature whatsoever is totally prohibited and violates the rights of this copyright.

Print Friendly, PDF & Email
Com Inside Bottom
Com Inside Bottom
Com Inside Bottom
Com Inside Bottom
Com Inside Bottom

About the Author