Commercial characteristics
- Sponsor who loaned the product for the magazine: Acquired on our own funds
- Price of the tested product: 90 Euros
- Product category according to its selling price: High end (from 71 to 100 euros)
- Atomizer type: Classic rebuildable
- Number of resistances allowed: 1
- Resistance Type: Classic Reconstructible
- Type of wicks supported: Silica, Cotton, Ekowool
- Quantity in milliliters announced by the manufacturer: 2.9
Reviewer comments on business characteristics
The Nectar Tank is a compact atomizer, easy to use and impeccable finish.
All without a single thread, except its connection 510 which more is adjustable.
Physical characteristics and felt quality
- Width or Diameter of the product in mms: 22
- Length or height of the product in mms as it is sold, but without its drip tip if it is present, and regardless of the length of the connection: 33
- Weight in grams of the product as sold, with its drip tip if it is present: 38
- Material constituting the product: Stainless steel, PMMA
- Form Factor Type: Kraken / Kayfun
- Number of component parts without screws and washers: 4
- Number of threads: 1
- Quality of the threads: Very good
- Number of O-rings, Dript-Tip excluded: 4
- Quality of O-rings present: Good
- O-ring positions: Top Cap - Tank, Other
- Capacity in milliliters actually usable: 2.5
- Overall, do you appreciate the quality of manufacture of this product with regard to its price? Yes
Rating of the vapelier as to feelings quality: 4.8 / 5 
Reviewer's comments on physical characteristics and perceived quality
This atomizer has only one thread, it is that of its 510 connection.
On the other hand we can count 3 same visible O-rings, 2 for the sealing of the tank (including one to fit the top cap), the third ensuring the insulation between the two top plates which are superimposed and which each carry a different load .
the bottom plate connected to the base carries a negative charge (pole “-” of the accumulator) and that of the top (visible), carries the positive charge.
The type of “form factor” is not really that of the Kraken, but neither is it that of Kayfun.
Difficult to define because there is a bit of both, since the assembly is executed like a Kayfun while the appearance of the plateau looks like the kraken with the tank located below.
In the center of this base, Kayfun style, we will find the holes for the air flow.
Functional features
- Connection type: 510
- Adjustable positive stud? Yes, through an adjustment by thread, the assembly will be flush in all cases
- Presence of air flow regulation? Yes, but fixed only
- Diameter in mms maximum of the air regulation possible: 2
- Minimum diameter in mms of the air regulation possible: 2
- Positioning of the air regulation: From below and benefiting the resistances
- Spray chamber type: Conventional / Wide
- Heat dissipation of the product: Normal
Reviewer's comments on functional features
The plateau leaves a good place for the realization of the resistance which turns out to be very easy.
However, the air flow remains fixed and restricted, which will not allow the use of resistors that are too low, the latter will not have enough air and the atomizer will not dissipate the heat properly, you could therefore find yourself with a tight and much too hot vape.
It is with a resistance around 1.5 ohms, that the whole of this atomizer will be coherent for a pleasant and regular vape.
Drip-Tip Features
- Drip tip type: 510 Only
- Presence of a Drip-Tip? No, the vapoteur will have to acquire a compatible drip-tip, in order to be able to use the product
- Length and type of the drip-tip present: -
- Quality of the drip-tip present: -
Reviewer's comments on the Drip-Tip
For this price range, such an atomizer should have been delivered with a dedicated drip tip. Note that the latter exists, but that it is sold separately ... which I very much regret. In my opinion, this is a marketing positioning fault.
Evaluation of the packaging
- Presence of a box accompanying the product: No
- Would you say that the packaging is up to the price of the product? Can do better
- Presence of a user manual? No
- Is the manual understandable for a non-English speaker? No
- Does the manual explain ALL features? No
Vapelier's note on packaging: 2.5 / 5 
Reviewer's comments on conditioning
The atomizer is delivered in a small velvet bag. It's certainly cute, but I find this packaging a little light compared to the price of this atomizer which deserves at least its box and instructions for use.
On the other hand I appreciated that the Nectar is delivered with two additional cruciform type screws to change those which are originally mounted in the atomizer and which are screwed with an Allen key.
There are also two replacement gaskets for sealing the tank and two plugs (one full and one drilled) to close the hole used for filling.
We will finish with the Allen key, the use of which remains essential for screwing and unscrewing the central pin.
Appreciations in use
- Transport facilities with mod of test configuration: Ok for an inside jacket pocket (no deformations)
- Disassembly and cleaning facilities: Easy but requires a workspace
- Filling facilities: Easy, even standing in the street
- Easy to change resistors: Easy but requires a workspace to lose nothing
- Is it possible to use this product throughout the day with several vials of EJuice? Yes perfectly
- Was there leak after one day of use? No
- In the event of leaks during tests, descriptions of the situations in which they occurred
Vapelier's note on ease of use: 4 / 5 
Reviewer's comments on the use of the product
It is very easy to build resistance with such a plate, the passage of the wick is also practical by removing the tank, just by pushing it if it is empty ...
Otherwise, you will have to find a tool to push the wick into the first hole, pass it through the resistance, then pass it through the second hole ... all quickly enough before it soaks up. It is doable, but clearly requires a little practice in order to tame the beast.
The cotton fills the orifices (without stuffing) with a diameter of 4 mm, and the stopper positioned in its housing (diameter 4.3mm), guarantees the tightness of the whole.
So mounted, this atomizer will not give you any leak.
Recommendations for use
- With which type of mod is it advisable to use this product? Electronics AND Mechanics
- What mod model is it recommended to use this product with? The Colibri remains the ideal mod for this atomizer
- With which type of EJuice is it advisable to use this product? All liquids without problem
- Description of the test configuration used: A simple coil of value: 1.5 ohms, 7 turns of diameter 2mm and 1.8 ohms, 7 turns of diameter 2.5mm
- Description of the ideal configuration with this product: a single coil around 1.5 ohms with turns of at least 2mm diameter to suit the holes of the board
was the product liked by the reviewer: Yes
Overall average of the Vapelier for this product: 4.6 / 5 
Link to a video review or blog maintained by the reviewer author of the review
The mood ticket of the reviewer
The tray of this atomizer could make us believe that the assembly will be of the Genesis type… not at all!
The ideal assembly on the Nectar will be of the Kayfun type except that the ends of the wicks are bathed in the liquid of the reservoir located under the plate.
Attention this little gem is not made for the subohm, with a fixed air flow of 2mm, it is preferable to stay on resistance values above 1 Ohm, otherwise the lack of heat dissipation will give a too hot vape that would distort the flavors of your e-liquids.
Two caps are supplied with the atomizer, one is full, the other has a hole in the center ... the attentive reader that you are, must from the beginning ask yourself why ... no? 😉
This is quite simply to ensure optimal air pressure within the atomizer according to the diameter of your wicks and therefore the air which may or may not still pass through the holes which are dedicated to them.
If your locks are fine, use the full stopper,
If the wicks are thick, use the pierced stopper which will allow good capillarity of the liquid through the cotton, thanks to a better air / liquid supply within the reservoir.
This atomizer is particularly compact and easy to use, it is perfect for a daily vape during the day.
If this is not its price a little high (especially by selling the optional drip-tip that accompanies it), the nectar is a product that I recommend for any (e) vapoteur (vapoteuse) wishing to equip themselves with a product of good quality and easy to use throughout the activities of a busy day.
Looking forward to reading you.
Sylvie.i
(c) Copyright Le Vapelier SAS 2014 - Only full reproduction of this article is authorized - Any modification of any kind is totally prohibited and infringes the rights of this copyright.
