Goblin Mini by UD [Flash Test]

A. Commercial specifications

• PRODUCT NAME: Mini Goblin
• BRAND: UD
• PRICE: 29.90
• CATEGORY: Fiber atomizer
• RESISTANCE: Double coil rebuildable

B. Data sheet

• WIDTH OR DIAMETER OF THE PRODUCT: 22
• ATOMIZER HEIGHT: 28
• WEIGHT: 28
• DOMINANT MATERIAL: Stainless steel
• CONNECTION TYPE: 510
• AIRFLOW: Variable from tight to overhead
• SETTING THE CONNECTION: Fixed

C. Packaging

• Packaging quality: Very good
• Presence of a notice: Yes

D. Qualities and use

• Overall quality: Very good
• Quality of rendering: Exceptional
• Stability of the rendering: Very good
• Ease of implementation: Difficult

E. Conclusions and comments of the Internet user author of the review

I bought the mini Goblin from UD quite by accident. I came across a photo and I must say that its shape as well as its small size intrigued me. I ordered it immediately on a website in France.

First surprises 😉 It comes in a small black box with the inscription UD and Mini Goblin. In the box we find the mounted ato, A Pyrex Drip-Tip, a Pyrex reserve tank, a chamber reducer, a bag of screws and seal, an adapter for Drip Tip 510 and a manual (mine in English , but it's still easy to understand). So a very complete Package with all the spare parts.

The ato is small, it has a capacity of approximately 2,7ml, in comparison, it is not higher than an Origen Dripper, for an Ato RTA it is really surprising.
The machining quality is more than correct, but we still regret that the base of the ato is a little sharp and that the edges are not a little soft. You must therefore be careful not to cut yourself during disassembly and reassembly.

The Pyrex is quite thick, well rounded at the edges, the same for the Drip-Tip, in short, a beautiful finish.

When disassembling (as I said above) be careful not to cut your fingers with the base of the ato. 2 transparent gaskets, at the top and bottom of the Pyrex, have the function of maintaining the seal. The top of the fireplace and the top cap are screwed together.

2nd surprise…. The plateau is really tiny !!!! we even wonder how we are going to assemble the machine 😉

I decide to do a Double Coil assembly directly (we can also mount it in Single Coil with the chamber reducer). We see immediately that the big coils will not pass (3mm, and 3,5mm not possible) because the space between the bell and the coil is really minimal. I opt for a 2,5mm diameter Double Micro Coil assembly .. result in a resistance of 0,6 Ohms, that's fine with me 😉

My coils are fitted, no major problem, even if it is a bit tricky, just be careful to place your coils above the air inlets.
We place the Fiber Freaks (density 2) in the coils, and I realize that since the space is reduced, I have trouble putting the FF in the gutters …… .. SOLUTION: cut the end of his wicks in diagonals !!!!! once this is done we will result in a small point in the channel which will feed the rest of the wick !!

We moisten our coils with juice and we put everything back.

The filling is not as easy as I would have hoped ... .. the screw is really tiny and the syringe filling is mandatory (or syringe tip). 2,7ml of liquids in the Mini 😉

The air flow is adjusted by a small tab at the base of the ato. very practical we can go from a very tight to very airy setting (Min / Max).

Well, we test? 😉

My vape is quite aerial in general (KF4 Sub or Taifun fully open), and there this Little Mini Goblin gave me a slap !!! I have a rendering of dripper and crazy clouds for an ato RTA !!! (probably due to its very small room) the flavors are also very present !!!!

In conclusion, it's a very good RTA, with a rendering of flavors / vapor that really has nothing to envy to others. He has for him his smallness, his style, and a very good vape. On the other hand, for people who do not have the patience or who do their coils in a hurry, this Mini is not for you 😉

Note that I mounted the supplied DT adapter, which has trouble fitting on the ato. So I don't use it, on the one hand because the ato gains 1,2mm in height, on the other hand because I find it very good as it is (with his DT Pyrex).

Pros:
- Package content
- Small and beautiful
- Excellent vape
- capacity of about 3ml (for this size, it is an asset).

Cons:
- Finishing of the base which is sharp
- Difficulty of assembly due to the really small space
- DT adapter that does not hold well, due to the incorrectly sized seal.

Note from the user author of the review: 4.5/5

(c) Copyright Le Vapelier SAS 2014 - Only full reproduction of this article is authorized - Any modification of any kind is totally prohibited and infringes the rights of this copyright.