Header
IN SHORT:
Hellixer by Footoon
Hellixer by Footoon

Hellixer by Footoon

Commercial characteristics

  • Sponsor who loaned the product for the magazine: Acquired on our own funds
  • Price of the tested product: 34.9 Euros
  • Product category according to its selling price: Entry level (from 1 to 35 euros)
  • Atomizer type: Reconstructable compression
  • Number of resistances allowed: 2
  • Resistor Type: Rebuildable Micro coil, Reconstructable Micro coil with temperature control
  • Supported Bit Type: Cotton, Fiber Freaks Density 1, Fiber Freaks Density 2, Fiber Freaks Yarn 2 mms, Fiber Freaks Cotton Blend
  • Quantity in milliliters announced by the manufacturer: 3

Reviewer comments on business characteristics

Hellixer is to this day the last rebuildable atomizer from Footoon.

Footoon that we already know by the first atomiser double coil, the Aqua, in 21mm of diameter. It is always with interest that these models attract attention because there is often innovation in this manufacturer. The Hellixer is no exception to this rule since this rebuildable is equipped with a tank and feeds the assembly in the manner of a dripper. These pads are constructed in such a way that not only do they accommodate the resistive but they also condition the installation of the capillary in a rather particular way to leave a very refined atomization chamber.

The system seems complex because there are a lot of parts to assemble and disassemble. However, when the assembly is in place, there is no need to touch it and the assembly is accessible without emptying the tank.

The Helixer is designed more for the sub-ohm. Whether we are around 0.5Ω with a classic assembly at 35W or in an exotic assembly in 55W at 0.2Ω, the atomizer collects but requires you to double coil. The only difficulty remains to measure the cotton and especially to place it correctly. This atomizer is not really made for beginners because there is a big risk of leakage if everything is not assembled correctly.

Side look, we are on a model superbly designed, between sobriety, sportiness and aggressiveness. It has character associated with the color black and steel, but I regret a little its diameter in 23mm which leaves little choice in terms of mechanical mods often in 22mm.

It is an atomizer that has a capacity of 3ml, but in option is proposed a tank with an extension to enlarge its capacity to 5ml. Its visibility on the liquid reserve is very apparent.

Offered at less than 35 euros, it remains in a suitable entry-level range. Even if it has good advantages, it nevertheless retains some disadvantages.

Physical characteristics and felt quality

  • Width or Diameter of the product in mm: 23
  • Length or height of the product in mm as sold, but without its drip tip if it is present, and regardless of the length of the connection: 36
  • Weight in grams of the product as sold, with its drip-tip if it is present: 40
  • Material composing the product: Stainless steel, PMMA, Pyrex, Plexiglass
  • Type of Form Factor: Velocity
  • Number of component parts without screws and washers: 8
  • Number of threads: 3
  • Quality of the threads: Good
  • Number of O-rings, Drip-Tip excluded: 9
  • Quality of O-rings present: Good
  • O-ring positions: Drip-Tip Connection, Top Cap - Tank, Bottom Cap - Tank, Other
  • Capacity in milliliters actually usable: 3
  • Overall, do you appreciate the quality of manufacture of this product with regard to its price? Yes

Rating of the vapelier as to feelings quality: 4 / 5 4 5 out of stars

Reviewer's comments on physical characteristics and perceived quality

The main material is stainless steel for this atomizer in four parts: the base, the tray, the body of the atomizer and part of the top-cap. A top cap that consists of two sections, which allows an opening for filling. The upper part is made of black PMMA, like the drip-tip, to reduce any excessive heat.

The different pieces have a superb finish, the steel is in sufficient quantity and the finishes have been worked meticulously.

At the heart of the atomizer, over the tray and in order to have a well insulated atomization chamber, there is a yellow tinted polycarbonate part whose shape is specific and is placed in only one direction. This centerpiece pivots with the tray to manage the arrival of the liquid on the cotton and the opening or closing of the airflow. This bell is well protected inside the atomizer, but be careful not to break it when you take it out because it is an important piece of hard plastic so fragile to shocks.

This Hellixer is equipped with 8 O-rings and a very special star-shaped seal that rests on the bell. The downside to this kind of concept is that the more you have seal, the more you have risk of long-term leakage because of wear or friction too important, there is always a more one weak than others.

At the level of the threads, they are correct except that, for the filling, the two parts that make up the top-cap are sometimes difficult to separate and the whole comes.

The base is removed using two small Phillips screws to access the tray, there are no particular constraints except that each part fits in a specific direction and access to the assembly requires a tool, but the chosen approach allows access to the assembly without the need to empty the tank.

The pin is adjustable by a screw to have a perfectly flush set-up.

The pyrex tank gives a good visibility on the level of the liquid and it is particularly well protected without much risk of breakage even in case of a fall.

The design of this ato is a great success, the airflow is camouflaged behind fins. The overall look gives a sporty appearance and the concept with the plastic bell considerably reduces the heat effect which is very well dissipated. On the body of the atomizer, between two windows, is a very pretty engraving that gives the name of the ato and recalls both the type of tray. A plateau that is velocity type for fixing the coils but completely innovative in its shape that allows to set up the locks so as to completely clear the center of the chamber through which the steam will rise.


I found, as an option, a pyrex tank with a stent that enlarges the reservoir and changes the capacity of 3ml to 5ml.

Functional features

  • Connection type: 510
  • Adjustable positive stud? Yes, through an adjustment by thread, the assembly will be flush in all cases
  • Presence of air flow regulation? Yes, and variable
  • Diameter in mms maximum of the air regulation possible: 8
  • Minimum diameter in mms of the air regulation possible: 0.1
  • Air regulation positioning: Lateral positioning and benefiting resistors
  • Atomization chamber type: Bell type
  • Heat dissipation of the product: Excellent

Reviewer's comments on functional features

The functions of this atomizer are mainly focused on flavors and power. It is a paradox for me to say that the sub-ohm is tasty, nevertheless the compromise is nicely realized with a dissipation of the heat very well controlled and a convergence of the directed steam in the center of the plate for sufficiently concentrated aromas to 'get tasty flavors.

It is able to provide vaping with exotic assemblies (fused type) at a power of 55W, like that of a classic 30W assembly, but not below this value at risk of leakage. The upper limit for the total resistance is around 0.6Ω because the adjustment of the liquid flow and the airflow are not really precise and are inseparable from each other.

Drip-Tip Features

  • Drip tip type: 510 Only
  • Presence of a Drip-Tip? Yes, the vaper can immediately use the product
  • Length and type of drip-tip present: Medium
  • Quality of the present drip-tip: Good

Reviewer's comments on the Drip-Tip

The medium-sized drip-tip is in black delrin. Totally integrated in the upper part of the top cap which is also in black delrin, they together offer a warm vapor thanks to this material.

The internal opening of this drip-tip is 9mm internally for 12mm on the outside.

Its shape is straight and remains a standard but is quite suited to the look of the atomizer. It is also possible to replace this one in the blink of an eye because its connection is in 510.

Evaluation of the packaging

  • Presence of a box accompanying the product: Yes
  • Would you say that the packaging is up to the price of the product? Yes
  • Presence of a user manual? No
  • Is the manual understandable for a non-English speaker? No
  • Does the manual explain ALL features? No

Vapelier's note on packaging: 2 / 5 2 5 out of stars

Reviewer's comments on conditioning

Overall conditioning is enough.

In a box on two floors, we find the Hellixer wedged in a comfortable foam. On the lower floor, two bags filled with accessories such as a 2.5mm diameter rod that serves as a support for the resistors with a BTR key which unfortunately is of poor quality because it does not allow to tighten the screws properly. These tools are accompanied by two spare Phillips screws for the base and two additional BTR type screws for mounting in the event of a loss.

The other bag contains a black Silicone ring in the name of Footoon, two additional seals in the shape of a star, a single transparent seal for the tank, a second (blue / green) for the bell and four others of small diameter. I regret that the number of replacement joints is also limited but we must admit that not all manufacturers offer as much.

There is no record but on the box we find the characteristics of the Hellixer and the number that certifies the authenticity of the product, which we discover scratching with the nail.

Too bad there is no more explanation on the use of the atomizer.

Appreciations in use

  • Transport facilities with the mod of the test configuration: Ok for a side pocket of Jean (no discomfort)
  • Disassembly and cleaning facilities: Easy but requires a workspace
  • Filling facilities: Easy, even standing in the street
  • Easy to change resistances: Difficult, requires various manipulations
  • Is it possible to use this product throughout the day with several vials of EJuice? Yes perfectly
  • Was there leak after one day of use? No
  • In the event of leaks during the tests, descriptions of the situations in which they occur:

Vapelier's note on ease of use: 3.7 / 5 3.7 5 out of stars

Reviewer's comments on the use of the product

The use of this Hellixer is not for everyone. Above all, it is necessary to control the flows between the airflow and the flow of the juice which is consequent. The flow of liquid is directly through the four openings on the top of the tinted plastic bell, the air flow is provided by the two holes on both sides of the same room.

To do the assembly, it is necessary to remove the base by unscrewing the two small screws that are under the atomizer, then remove the base and finally pull to clear the tray.

The assembly itself is quite simple since the studs offer a velocity type assembly with a screw for each of the legs. But given the flow of the liquid, you will need a double coil capable of consuming the juice that arrives at each suction and make it coincide with the flow of air that this atomizer offers. The mounting range associated with the Hellixer is between 0.6Ω and 0.2Ω, for coils using worked wires or wires of at least 0.4mm (in kanthal). After having tested numerous assemblies, six in total, it is clear that this hypothesis is confirmed.

The most difficult will be the choice of the coil diameter (usually 2.5 or 3mm seems-ideal) and how to place your capillary. Because depending on the amount of cotton and its positioning, you risk leaks.

The pads are designed to position the cotton on the top so that it imbibe and it can keep a compression chamber atomization. But also on the bottom to use the excess liquid that would pass on the board to prevent it from going through the air-holes. There are three ways to proceed:

1- Cut the capillary in two: this method was not conclusive, after passing my cotton in the resistance, I separated each part in two but the material on the top is insufficient to absorb all the liquid that goes down, hence leaks.

2- Place the cotton as usual, put the locks in the upper part and with a small forceps bring down a little cotton in the bottom housing. Then cut the surplus to 2mm.


3- This method and the one that seems to me the easiest to implement and that brings more satisfaction. By placing the cotton normally and then add a second wick on the openings at the top of the studs. Cut the locks in half and fold them down.

Of the three methods, the first one caused me leaks.

The second, although effective, caused me at one point the following concern: one end of the cotton is raised and blocked the pivot system to close and open the arrival of the juice.

The third proved to be easier to place and no worries, but be careful not to overload cotton.

It is necessary just to obstruct the arrivals of the liquid with the cotton taking care that this one does not exceed to leave free fields to the rotation of the plastic part.

Once the assembly is carried out it is necessary to put back the tray in its housing. Be careful to position your tray so as to put your resistance against the airholes. Then lay the base by aligning the notches and turn this last piece to insert the two screws and finally screw.


The filling must be done after closing the airholes and therefore the arrival of the liquid. It is then necessary to unscrew the part of the top-cap in delrin, to pour the juice and to close again.

Recommendations for use

  • With which type of mod is it advisable to use this product? Electronics AND Mechanics
  • What mod model is it recommended to use this product with? all mod having a width of 23mm mini
  • With which type of EJuice is it advisable to use this product? All liquids without problem
  • Description of the test configuration used: in sub-ohm on mod electro with various assemblies in 35W and 55W
  • Description of the ideal configuration with this product: There are none in particular

was the product liked by the reviewer: Yes

Overall average of the Vapelier for this product: 4.2 / 5 4.2 5 out of stars

Link to a video review or blog maintained by the reviewer author of the review

The mood ticket of the reviewer

A Hellixer that offers a big steam and that combines well with pleasant flavors. This atomizer, although aesthetically successful and offering a good vape, is not made for all vapers because it is not easiest to control.

The airflow is very airy and the fluid flow therefore for double-coil sub-ohm assemblies and a power of at least 30 - 35W. Its liquid reserve is 3ml but there is an optional larger tank which offers a capacity of 5ml.

The biggest drawback with the Hellixer is that you have to use a screwdriver to access the plate, whereas a ring with a thread would have been easier to use. The other difficulty is the position of the cotton which must not protrude from the openings of the bell and must be accurately dosed. The liquid flow rate is totally dependent on the opening of the airflow and does not allow precise dosing.

On the other hand, the product is of good quality for the price and its pyrex tank is not only thick in matter but it is very well protected. The visibility on the reserve of juice is nicely thought and the two-colored principle that associates the top-cap in delrin ensures a vape which is not too hot.

Sylvie.I

(c) Copyright Le Vapelier SAS 2014 - Only full reproduction of this article is authorized - Any modification of any kind is totally prohibited and infringes the rights of this copyright.

Print Friendly, PDF & Email
Com Inside Bottom
Com Inside Bottom
Com Inside Bottom
Com Inside Bottom

About the Author