Estia by Gus
Estia by Gus

Estia by Gus

Commercial characteristics

  • [/ if] Price of the tested product: 130 Euros
  • Product category according to its selling price: Luxury (over 100 euros)
  • Atomizer type: Classic rebuildable
  • Number of resistances allowed: 3
  • Resistor Type: Rebuildable Micro coil
  • Type of wicks supported: Cotton
  • Quantity in milliliters announced by the manufacturer: 3

Reviewer comments on business characteristics

An atomizer where you can go from 01 to 03 coils even for the experienced up to 06 coils but then it becomes complicated. For mounting, I recommend the cotton micro coil because other types of coils will be complicated to place.

Physical characteristics and felt quality

  • Width or Diameter of the product in mms: 22
  • Length or height of the product in mms as it is sold, but without its drip tip if it is present, and regardless of the length of the connection: 39
  • Weight in grams of the product as sold, with its drip tip if it is present: 65
  • Material composing the product: Stanless Steel grade 304
  • Form Factor Type: Kayfun / Russian
  • Number of component parts without screws and washers: 5
  • Number of threads: 3
  • Quality of the threads: Very good
  • Number of O-rings, Dript-Tip excluded: 4
  • Quality of O-rings present: Very good
  • O-ring positions: Top Cap - Tank, Bottom Cap - Tank, Other
  • Capacity in milliliters actually usable: 3
  • Overall, do you appreciate the quality of manufacture of this product with regard to its price? Yes

Rating of the vapelier as to feelings quality: 4 / 5 4 5 out of stars

Reviewer's comments on physical characteristics and perceived quality

A really nice finish, the threads are pretty good but hang a little from time to time.

Functional features

  • Connection type: 510
  • Adjustable positive plot? Yes, through a thread adjustment, the assembly will flush in all cases
  • Presence of a regulation of the flow of air? Yes, and variable
  • Diameter in mms maximum of the air regulation possible: 8
  • Minimum diameter in mms of the air regulation possible: 2
  • Positioning of the air regulation: From below and taking advantage of the resistances
  • Spray chamber type: bell type
  • {Heat dissipation of the product: Normal Reviewer's comments on functional characteristics The atomizer features an airflow control system ranging from 3 holes of 3 mm to 01 holes of 02mm. The airflow arrives just below each resistance which allows a good production of steam and good flavors. The air inlet holes inside can be individually sealed by screw screws provides. The atomizer can also be mounted in hybrid on a Gus mod. Drip-Tip Features Drip tip attachment type: 2 Only Presence of a Drip-Tip? No, the vapoteur will have to buy a compatible drip-tip, in order to be able to use the product Length and type of drip-tip present: No drip tip present Quality of the present drip-tip: No present drip tip Reviewer's comments on the Drip-Tip No drip tip supplied with this atomizer, it's a pity for that price. Evaluation of the packaging Presence of a box accompanying the product: No Would you say that the packaging is up to the price of the product? No Presence of a user manual? No Is the manual understandable for a non-English speaker? No Does the manual explain ALL features? No Vapelier's note on packaging: 4 / 0 Reviewer's comments on packaging The atomizer arrives in a plastic zip bag with a small survival kit. I find it unacceptable that an atomizer at this price happens in this kind of packaging. Fortunately, the manufacturer is not stingy in bubble wrap for shipping because there is a risk of damage to the product during transport. Appreciations in use Transport facilities with the mod of the test configuration: Ok for an external jacket pocket (no deformations) Disassembly and cleaning facilities: Easy but requires a workspace Filling facilities: Super simple, even blind in the dark! Easy to change resistance: Difficult, requires various manipulations Is it possible to use this product throughout the day with several vials of EJuice? No Was there leak after one day of use? Yes In the event of leaks during tests, descriptions of the situations in which they occurred It happens from time to time after a filling that the atomizer leaks at the airflows. When filling, gently top up the cap until the holes at the top are plugged. After that, you have to return the atomizer and finish putting the top cap back. This trick will prevent you from leaking normally, at least for me it works. Note from Vapelier regarding ease of use: 4 / 1.7 Reviewer's comments on product use This atomizer is clearly intended for an informed public! The assembly of the resistors is not easy, it requires several montages for the tamed. Recommendations for use With which type of mod is it advisable to use this product? Electronics AND Mechanics With which mod model is it advisable to use this product? A GUS mod mounted in hybrid With which type of EJuice is it advisable to use this product? All liquids without problem Description of the test configuration used: Gus G22, SONY VTC5 battery, and five pawns liquid Description of the ideal configuration with this product: The one described previously was the product liked by the reviewer: Yes Overall average of the Vapelier for this product: 2 / 2 Link to a video review or a blog maintained by the reviewer author of the review The reviewer's mood post This atomizer restores the flavors of liquids really well. The central stud system has been well thought out with small notches that can block your kanthal during your montages. The filling is easy and the airflow is perfect in my opinion. Associated with a GUS mod mounted in hybrid, it will satisfy you in every way. (c) Copyright Le Vapelier SAS 8 - Only the complete reproduction of this article is authorized - Any modification of any kind whatsoever is completely prohibited and violates the rights of this copyright. Print Friendly, PDF & Email
Com Inside Bottom
Com Inside Bottom
Com Inside Bottom
Com Inside Bottom

About the Author