Commercial characteristics
- Sponsor having loaned the product for the magazine: vapoter
- Price of the tested product: 29.90 Euros
- Product category according to its selling price: Entry level (from 1 to 35 euros)
- Atomizer type: Classic rebuildable
- Number of resistances allowed: 1
- Resistor Type: Classic Reconstructible, Rebuildable Micro Coil
- Supported Bit Type: Cotton, Fiber Freaks Density 1, Fiber Freaks Density 2, Fiber Freaks Yarn 2 mms, Fiber Freaks Cotton Blend
- Quantity in milliliters announced by the manufacturer: 2.5
Reviewer comments on business characteristics
This is a great originality at Advken with the CP RTA. It is a product combining two styles of atomizers: the classic rta with the bell and the chimney and the combo rdta of the Avocado or Gaia type with the capillary which hangs under the plate.
Although its diameter is 24mm, the particularity of this atomizer requires reducing the plateau. What could be annoying (or narrow) for the assembly but, as the construction requires only one resistance, in the end the atomizer with its tray is sufficient and well proportioned, with a double adjustable airflow.
The capacity is quite modest with 2.5ml capacity, because side vape, even if the assembly is done in single coil, it remains very aerial sub-ohm for a nice resistance that will require a large juice supply.
On the look side, the aesthetics are rather successful with a fairly large tank which airs the look of the CP Tank which is moreover very accessible with a price that is also well refined.
Physical characteristics and felt quality
- Width or Diameter of the product in mm: 24
- Length or height of the product in mm as sold, but without its drip-tip if it is present, and regardless of the length of the connection: 34
- Weight in grams of the product as sold, with its drip-tip if it is present: 45
- Material composing the product: Stainless steel, Pyrex
- Form Factor Type: Goon
- Number of component parts without screws and washers: 5
- Number of threads: 3
- Quality of the threads: Good
- Number of O-rings, Drip-Tip excluded: 8
- Quality of O-rings present: Good
- O-ring positions: Drip-Tip Connection, Top Cap - Tank, Bottom Cap - Tank, Other
- Capacity in milliliters actually usable: 2.5
- Overall, do you appreciate the quality of manufacture of this product with regard to its price? Yes
Rating of the vapelier as to feelings quality: 4 / 5 
Reviewer's comments on physical characteristics and perceived quality
The CP RTA is in stainless steel with a pyrex tank. Although the aesthetic is nice, it remains vulnerable to shock.
Overall, there is sufficient material on all parts that are properly machined to allow for proper threads. As for the seals, they are satisfactory and provide a good seal. The insulation of the parts between them is perfectly carried out.
Access to the assembly will require emptying the tank but this operation is very simple with a syringe since the opening for filling is wide enough to allow this manipulation.
The tray is mounted on an axle to be elevated in the manner of the "Genesis" atomizers, then covered by a bell that reduces the combustion chamber for a short but wide chimney since it is 10mm in diameter.
The pads are clamps held by a central spring-mounted screw. The largest wires can be placed there without worry and the resistor can be assembled regardless of the direction in which it is rolled. The capillary is fed as on most RDTA type atomizers, a certain length of the wick of which is bathed in the juice.
The airflow takes its source in two openings on the base of 14 x 1,2mm, which allows good heat dissipation. Depending on the resistance, it will be useful to leave the airholes wide open or to reduce them to the convenience of the vapoteur by a simple and easy rotation. As for the positive pin, it is adjustable via a screw.
Functional features
- Connection type: 510
- Adjustable positive stud? Yes, through an adjustment by thread, the assembly will be flush in all cases
- Presence of air flow regulation? Yes, and variable
- Diameter in mm maximum of the air regulation possible: 10
- Minimum diameter in mm of the air regulation possible: 0.1
- Positioning of the air regulation: From below and benefiting the resistances
- Atomization chamber type: Bell type
- Heat dissipation of the product: Normal
Reviewer's comments on functional features
The functions of the CP RTA play on versatility since it can be used for a large production of vapor but it can also be a nice atomizer made to taste the flavors of certain liquids that accept powers of 25W and above.
Very airy, it takes on exotic resistance, even broad, thanks to the topography of its studs. So even with just one resistance, cloud chasing is well within reach. The combustion chamber being small, this atomizer can also prove to be a good companion for the tasting of liquids accepting a minimum heating of 25W, so watch out for some fruity notes that might not appreciate.
The filling is simple. It is operated from the top of the atomizer which offers a beautiful opening. The airflow and the pin adjust; when supplying the capillary, it is done by itself without a dry-hit by immersing the ends in the reservoir located under the plate.
Drip-Tip Features
- Type of drip-tip attachment: Owner but passage to 510 through a supplied adapter
- Presence of a Drip-Tip? Yes, the vaper can immediately use the product
- Length and type of drip-tip present: Short
- Quality of the present drip-tip: Good
Reviewer's comments on the Drip-Tip
The proprietary drip-tip is in delrin, as is the adapter that goes from the 810 connection to the 510. Its shape is classic, short and straight, but remains pleasant in the mouth and offers a large internal opening of 10mm, equal to that of the chimney, for direct inhalation.
The adapter offers a format that is quite suitable for a quieter vape when mounting does not require power and when the airholes are reduced.
Evaluation of the packaging
- Presence of a box accompanying the product: Yes
- Would you say that the packaging is up to the price of the product? Yes
- Presence of a user manual? No
- Is the manual understandable for a non-English speaker? No
- Does the manual explain ALL features? No
Vapelier's note on packaging: 2 / 5 
Reviewer's comments on conditioning
Besides the fact that there is no manual, something that I consider essential for an atomizer, the black square box remains honorable for its price. The top of the box displays the outlines of a sun with the letters CP in its center.
The interior is attractive, with a black velvet foam in which the atomizer is wedged, with an additional tank, the drip-tip adapter, a Phillips "Doctor coil" screwdriver and a well-stocked bag of accessories at its side. many gaskets, two spare screws and extra springs as well as a Fused type resistance
A very honorable packaging that quickly forget the absence of instructions.
Appreciations in use
- Transport facilities with the mod of the test configuration: Ok for an external jacket pocket (no deformations)
- Disassembly and cleaning facilities: Easy, even standing in the street, with a simple tissue paper
- Filling facilities: Super simple, even blind in the dark!
- Easy to change resistors: Easy but requires a workspace to lose nothing
- Is it possible to use this product throughout the day with several vials of EJuice? Yes perfectly
- Was there leak after one day of use? No
- In the event of leaks during the tests, descriptions of the situations in which they occur:
Vapelier's note on ease of use: 4 / 5
Reviewer's comments on the use of the product
In use, the simple coil assembly makes things much easier. In addition, the screw in the center of the studs can place the tabs of the resistance to the right or left of it, it seems surely harmless but for a left-handed, it is a detail that can be advantageous. The capillary passes under the tray to bathe the ends in the tank, so it thrives enough to feed the resistance without dry hit, with powers up to 50W without feeling hot.
The only discomfort felt is the splash of liquid that is expelled from the resistance during the suction to land in the mouth. Too bad, this atomizer deserves a grid on the base of the drip-tip because the coil is largely exposed just in the center and raised on the axis of the plate which, in the end, places the assembly very close to the mouth.
After filling, it will not be possible to access the tray without emptying the tank but the capacity is not huge and can be emptied easily with a syringe.
On the vape side, we are mainly in the air with moderate vape powers between 25 and 50W, which leaves a wide range of power and possible resistive values. The taste aspect is not of the order of the exceptional but remains very suitable with much better flavors than on most RDTA atomizers. This fact is attributable to the bell on the tray which reduces the chamber and concentrates the aromas more.
Recommendations for use
- With which type of mod is it advisable to use this product? Electronics AND Mechanics
- What mod model is it recommended to use this product with? All mod having a width of 24mm mini
- With which type of EJuice is it advisable to use this product? All liquids without problem
- Description of the test configuration used: with a kanthal resistance of 0.6Ω around 35W
- Description of the ideal configuration with this product: There are none in particular
was the product liked by the reviewer: Yes
Overall average of the Vapelier for this product: 4.3 / 5 
Link to a video review or blog maintained by the reviewer author of the review
The mood ticket of the reviewer
Overall, the ADVKEN RTA CP is a very good atomizer that is suitable for all users and offers a wide range of vape power. This all-stainless steel and pyrex product is in a very affordable price range with good physical and vape quality.
It allows you to use direct or indirect inhalation, the cloud with a large production of vapor or just to appreciate the flavor of your liquids. However, the tank only offers a reserve reduced to 2.5ml which remains limited for the sub-ohm.
The volume of the combustion chamber is reduced via a bell and the very large mini chimney helps the evacuation of steam. The airflow and the pin are adjustable and the diameter of the atomizer requires a mod of 24mm.
The only minor disadvantages remain the accessibility to the assembly when the atomizer is filled and splashing liquid in the mouth during aspiration because of a coil too close to a drip-tip without grid.
Sylvie.I
(c) Copyright Le Vapelier SAS 2014 - Only full reproduction of this article is authorized - Any modification of any kind is totally prohibited and infringes the rights of this copyright.
