Header
IN SHORT:
Brainbox v2 by Brainbox Concept [Flash Test]
Brainbox v2 by Brainbox Concept [Flash Test]

Brainbox v2 by Brainbox Concept [Flash Test]

A. Commercial specifications

  • Price of the tested product: 149.9 Euros
  • Mod type: Mechanical
  • Shape type: Box plate - Emech type

B. Data sheet

  • Maximum power: Not applicable
  • Maximum voltage: Not applicable
  • Minimum value of resistance for a start; 0.1 Ohms
  • Length or height of the product: 85 mms
  • Product Width or Height: 45 mms
  • Weight without accumulator: 100 grams
  • Dominant material overall: Brass

C. Packaging

  • Packaging quality: Correct
  • Presence of a notice: No

D. Qualities and use

  • Overall quality: Very good
  • Quality of rendering: Very good
  • Stability of rendering: Good
  • Ease of implementation: Very easy

E. Conclusions and comments of the Internet user author of the review

I am looking for a small and lightweight mechanical box in double battery here I am delighted.

For once, sobriety rhymes with performance and efficiency and I BUY!

Delivered in his little felt pouch, I discovered my new acquisition, a small box that seems banal but that gives off a soul.
Too bad all the same that there is not one or two spare pins just in case.

Black delrin coating for the mod body allows regular use without overheating.

At the bottom right of one of the faces, I find the logo of the creator with a magnificent “B” surrounded by a stylized circle. It will therefore be the only decorative element of this box but it is more than enough.
Due to the fact that it is engraved in the delrin body, this immediately gives a qualitative aspect, unlike an impression which would undoubtedly have faded in the long term.

The moderator also wanted to use this material for the switch which has the merit of being really responsive! A very short race… we touch it delicately with its big one… and here it is Chocapic! or rather steam;). Being located above the box on a brass plate tilted a few degrees, I found its access very intuitive, so this is another good point for this BrainBox V2.

Brass, let's talk about it. He covers the bottom and top of the box to come close. How else would our accusers fit in ??

Let's come to the main point anyway, why is it reactive? Thanks to its connectivity! All of the connection and contact points are made of copper.

You will have two connectors under the box for your two batteries:
Default: it is a manual screwing and unlike other models, there is no notch in the center to insert a screwdriver to facilitate unscrewing in case the screw thread is seized.
Advantage: I do not risk to be afraid for a possible degassing the ventilation holes are really huge for once!

The connector for your atomizer:
Flaw: I find it a bit fragile and can break easily if you go without measuring its strength.
Advantage: It is adjustable and especially its screw thread is reversed so it will not be screwed back on itself by positioning its atomizer on it.

Once I dismantled the upper part of my box I also noticed that the connection tab between the pin and the batteries is also made of copper 😉

Me who tend to swallow up my batteries throughout the day, this box brings me satisfaction because they are in parallel and allow me to easily hold the day.
Note that it also works with a single battery if you do not have a spare pair of batteries.

Regarding the maximum voltage, I think there must be a drop Volt of 0,03 or 0,04, so I must be very close to 4,2 Volt.
And for the delivered power it will depend once more on your editing.

Voili Voilou, I am finished and I highly recommend it to all Méca lovers.

At the review the friends 😉
Anokre

Note from the user author of the review: 4/5 4 5 out of stars

(c) Copyright Le Vapelier SAS 2014 - Only full reproduction of this article is authorized - Any modification of any kind is totally prohibited and infringes the rights of this copyright.

Print Friendly, PDF & Email
Com Inside Bottom
Com Inside Bottom
Com Inside Bottom
Com Inside Bottom

About the Author