Commercial characteristics
- Sponsor who loaned the product for the magazine: Acquired on our own funds
- Price of the tested product: 54 Euros
- Product category according to its selling price: Mid-range (from 36 to 70 euros)
- Atomizer type: Classic rebuildable
- Number of resistances allowed: 2
- Resistance Type: Classic Reconstructible, Rebuildable Micro Coil, Reconstructible Classic Temperature Controlled, Rebuildable Micro Coil with Temperature Control
- Type of wicks supported: Silica, Fiber Freaks density 2
- Quantity in milliliters announced by the manufacturer: 6
Reviewer comments on business characteristics
The Aromamizer is a multi-faceted atomizer. For the model acquired it is the RDTA (Rebuildable Drifting Tank Atomizer) 6ml with the 2 plate poles, however the plate is interchangeable with a system 3 poles. Also this atomizer exists in version 3ml and version dripper and always with the same principle for its base.
Quite classic in appearance, it reminds me a lot of the Taifun GT which like it, moreover, has a diameter on its base of 23mm but the resemblance stops there.
Its principle, at the level of the airflow, is quite judicious and avoids leaks, however it does not allow to adjust the air in a vape situation but by affixing a silicone ring which adapts perfectly well, we can reduce the 'finish, 4 or 2 holes.
The drip tip is also very clever, it avoids having liquid rising in the mouth.
As for the operation, I will not tell you more, I will let you discover the rest while confiding you all the same, that it is a very powerful atomizer.
Physical characteristics and felt quality
- Width or Diameter of the product in mms: 23
- Length or height of the product in mms as it is sold, but without its drip tip if it is present, and regardless of the length of the connection: 55.5
- Weight in grams of the product as sold, with its drip tip if it is present: 65
- Material composing the product: Stainless steel, Pyrex
- Form Factor Type: Kayfun / Russian
- Number of component parts without screws and washers: 6
- Number of threads: 7
- Quality of the threads: Very good
- Number of O-rings, Drip-Tip excluded: 5
- Quality of O-rings present: Good
- O-ring positions: Drip-Tip Connection, Top Cap - Tank, Bottom Cap - Tank, Other
- Capacity in milliliters actually usable: 6
- Overall, do you appreciate the quality of manufacture of this product with regard to its price? Yes
Rating of the vapelier as to feelings quality: 5 / 5 
Reviewer's comments on physical characteristics and perceived quality
In stainless steel this Aromamizer is rather well made with a very thick pyrex tank and that's pretty good. My regret is more on the choice of the diameter of the atomizer of 23mm, the mods and the boxes are more often 22 and I do well with the sets flushes.
The parts fit together perfectly, the threads are nice but screwing / unscrewing the top cap is not so simple because the thickness of the metal part does not offer a comfortable grip for effective support.
Also, you have to be careful when you unscrew your atomizer mod, it is not the base of your atomizer that opens, otherwise your tank will empty (we only have one time on this one) .
The pin is adjustable with a simple small screwdriver, it comes out enough (factory fitted) not to need to unscrew it. It provides perfect contact.
To reduce the airflow, it is absolutely necessary to use the silicone ring with 2 holes, provided in the kit. Although it is effective, aesthetically it is not terrible, plus it increases the diameter of your atomizer.
For filling, the maneuver is quite simple since there are eight holes for this. With a fine tip the practice is easy, it is just as easy with a pipette, even if it does not enter the holes, the channel is wide enough and enough holes so that nothing overflows.
Under the atomizer we find the initials of the name of the designer and a serial number finely engraved with a laser.
So much for this Aromamizer with a positive feeling overall for its technical characteristics.
Functional features
- Connection type: 510
- Adjustable positive stud? Yes, through an adjustment by thread, the assembly will be flush in all cases
- Presence of air flow regulation? Yes, but fixed only
- Diameter in mms maximum of the air regulation possible: 8
- Minimum diameter in mms of the air regulation possible: 4
- Air regulation positioning: Lateral positioning and benefiting resistors
- Atomization chamber type: Bell type
- Heat dissipation of the product: Excellent
Reviewer's comments on functional features
The first thing we can say is that the airflow is not adjustable. This atomizer is very aerial the only way to reduce the flow of air is to add a silicone ring supplied with the atomizer. So the efficiency is real but you can not adjust the airflow correctly.
The pin of the 510 connection is adjustable through a screw, even if this adjustment is not really essential since the contact is made very well, and the connector is not too long.
The filling is simple is perfectly suited to any type of tip, I even managed to pour my liquid by placing the edge of the bottle against the channel of the atomizer. With 6ml of capacity, the Aromamizer has a substantial autonomy.
For the plate, it is the 2 pole one that I received. On each pole you have 2 holes positioned vertically with, in all, 4 hollowed screws intended for each leg of your resistors. On the 4 screws I had to change two (provided) because they were screwed badly, but once the thing is adjusted, I must say that it is rather curious to have the screws on the side of the studs and not on them. Finally, it is not so restrictive and terribly practical! So Steam Crave allows you a good working position. These screws are effective and tighten without breaking the wire. In addition, your coils are perfectly straight and centered without needing to touch them up.
I ordered a separate 3-pole plate to test the difference. It is delivered to you with Allen screws and accompanied by additional screws, socket and cruciform, the choice is yours. Of course, when we go from one to the other, we quickly see that the space on this plate is not the same and the installation of the resistors is more delicate, since the central block only has only one opening for two wires. The coils need to be reworked to center them. The studs are of the classic type with a screwing on the top, with this plate it is preferable to privilege the Phillips head screws which allow an easier use (the screwdriver being straight unlike the Allen key).
Now let's move on to the use and feeling of this atomizer to see at the vape level, a possible difference between the two trays.
Drip-Tip Features
- Drip tip type: 510 Only
- Presence of a Drip-Tip? Yes, the vaper can immediately use the product
- Length and type of drip-tip present: Short
- Quality of the drip-tip present: Very good
Reviewer's comments on the Drip-Tip
The drip-tip is absolutely great, besides I think that from now on it is this type of drip that I will use for all my atomizers. It has openings on the side, this way it is impossible to have in the mouth rising juice.
Question vape, either with this type of drip-tip or another more classic I did not notice any difference, either in terms of flavor, or in terms of density or amount of steam.
Here is a very practical, well designed and efficient drip-tip.
Evaluation of the packaging
- Presence of a box accompanying the product: Yes
- Would you say that the packaging is up to the price of the product? Yes
- Presence of a user manual? Yes
- Is the manual understandable for a non-English speaker? No
- Does the manual explain ALL features? No
Vapelier's note on packaging: 4 / 5 
Reviewer's comments on conditioning
The manual sometimes explains briefly some parts of the operation of this atomizer and only in English. That said, the packaging is really complete with inside the black and red cardboard box:
- The Aromamizer
- An anti-rise drip tip
- A spare tank
- A notice in English
- An Allen key
- Two rings for the airflows
- Additional screws to change those of the studs
- And spare gaskets if necessary
A globally ideal pack for this product line.
Appreciations in use
- Transport facilities with mod of test configuration: Ok for an inside jacket pocket (no deformations)
- Disassembly and cleaning facilities: Easy, even standing in the street, with a simple tissue paper
- Filling facilities: Easy, even standing in the street
- Easy to change resistors: Easy but requires a workspace to lose nothing
- Is it possible to use this product throughout the day with several vials of EJuice? Yes perfectly
- Was there leak after one day of use? No
- In the event of leaks during the tests, descriptions of the situations in which they occur:
Vapelier's note on ease of use: 4.4 / 5 
Reviewer's comments on the use of the product
The use of the product is simple and the trays are interchangeable, it is very easy to switch from one to another or modify your assembly without having to empty your tank.
The six milliliters allow a substantial autonomy for a good day of use without having to refuel the tank. But be careful with the construction of a double coil of low resistive value (around 0.3Ω) which consumes a lot of liquid and will influence the useful charge time of the battery.
The airflow is very aerial, it allows you to make low resistance without fearing the dry hit. In addition, the system present, unlike most atomizers of this type, feeds the airflow on the resistance by the sides as a Dripper would do, and not under as the majority of atomizers. This allows to restore round flavors, sweet and concentrated, as for steam, although it depends on your assembly and the liquid used in addition to the airflow, it is usually very dense.
Regarding the difference between the two plates, without any hesitation it is the two-pole plate that I prefer for my vape. Firstly because the construction is easier and better balanced, and above all because the central block being absent, I have more room to work on my assembly, the air circulation is much more homogeneous and the flavors more concentrated than 'with the 3-stud plate. The difference is obvious. On the other hand, when I don't want to make a double coil, I run a single coil on the 3-stud plate with the Phillips-head screws because the difference between the two plates with a single coil is not huge.
Recommendations for use
- With which type of mod is it advisable to use this product? Electronics AND Mechanics
- With which mod model is it advisable to use this product? A double battery electronic box to have a duration of energy proportional to the capacity of the tank in 6ml
- With which type of EJuice is it advisable to use this product? All liquids without problem
- Description of the test configuration used: double coil of resistive value: 0.5Ω
- Description of the ideal configuration with this product: electro mod with double resistance around 0.4Ω
was the product liked by the reviewer: Yes
Overall average of the Vapelier for this product: 4.8 / 5 
Link to a video review or blog maintained by the reviewer author of the review
The mood ticket of the reviewer
The novelty on this atomizer is its airflow system.
Because this RDTA feeds air resistances in a lateral way as a dripper and not from below, to provide us with incomparable flavors and a sweet and round vape despite the power. Then, in the Aromamizer series, Steam Crave offers us a series of atomizers with 6ml tank, 3ml tank or dripper, with interchangeable bases and common plates. Finally the packaging is very complete, the price is correct the drip-tip is fabulous to prevent the rise of juice. This ato also has some flaws, a basic look, a diameter in 23mm and a non-adjustable airflow that requires a silicone ring to reduce the airflow.
Nevertheless, I concede a value for money value for an excellent vape.
I thank the Cabestany shop (Perpignan 66) "Oxygen" for this order.
Sylvie.I
(c) Copyright Le Vapelier SAS 2014 - Only full reproduction of this article is authorized - Any modification of any kind is totally prohibited and infringes the rights of this copyright.
