Commercial characteristics
- Sponsor having loaned the product for the magazine: The little vaper
- Price of the tested product: 32.90 Euros
- Product category according to its selling price: Entry level (from 1 to 35 euros)
- Atomizer type: Classic rebuildable
- Number of resistances allowed: 2
- Resistance Type: Classic Reconstructible, Rebuildable Micro Coil, Reconstructible Classic Temperature Controlled, Rebuildable Micro Coil with Temperature Control
- Type of wicks supported: Cotton, Fiber Freaks Density 1, Fiber Freaks Density 2, Fiber Freaks Cotton Blend
- Quantity in milliliters announced by the manufacturer: 3
Reviewer comments on business characteristics
Augvape, Chinese manufacturer of the Druid, one of its most famous products, offers us an RTA or RDTA atomizer (another one!) At a mini price since it is part of the entry-level product family.
On the program flavor, steam, Velocity tray… a bit like everyone else, but with two small originalities.
A product that will inevitably attract attention because of this attractive price.
So, good deal?
Physical characteristics and felt quality
- Width or Diameter of the product in mms: 23
- Length or height of the product in mms as sold, but without its drip-tip if it is present, and regardless of the length of the connection: 50
- Weight in grams of the product as sold, with its drip tip if it is present: 70
- Material composing the product: Delrin, Pyrex, Stainless Steel grade 304
- Form Factor Type: Kayfun / Russian
- Number of component parts without screws and washers: 7
- Number of threads: 4
- Quality of the threads: Good
- Number of O-rings, Drip-Tip excluded: 6
- Quality of O-rings present: Sufficient
- O-ring positions: Drip-Tip Connection, Top Cap - Tank, Bottom Cap - Tank, Other
- Capacity in milliliters actually usable: 3
- Overall, do you appreciate the quality of manufacture of this product with regard to its price? Yes
Rating of the vapelier as to feelings quality: 3.9 / 5 
Reviewer's comments on physical characteristics and perceived quality
At first glance, the Alleria is like Griffin and Cubis. The cage that protects the tank borrows from the lines of the Cubis and the top and bottom cap, they are oriented more towards the Griffin. I emphasize the fineness of the cage, be careful not to deform it when you disassemble the atomizer.
Visually, we immediately notice one of the peculiarities: its Pyrex atomization chamber bell. It's pretty cool and very practical to spot any problem on the coils. We will also note the impression of fragility of the Pyrex pieces, the thickness seems a little limited to me.
The top cap unscrews to allow filling from the top, the machining of the latter can be improved, the reliefs ensuring the grip are quite prominent and it is a little aggressive for the fingers
The Velocity plate is practical as usual, a movable ring ensures the maintenance of the wicks. Simply nested, it is even thinner than the tank cage and it deforms very easily.
The threads are correct without more and the joints of sufficient quality.
The airflow is generous and the adjustment ring of good quality, but it suffers from the same defect as the top-cap, its grip and quite aggressive.
It is certain that this Alleria is far from being exemplary in this respect, quite a few flaws, but the general appearance is correct and at the same time, considering the price, we clearly cannot expect perfection at the level quality.
Functional features
- Connection type: 510
- Adjustable positive stud? Yes, through an adjustment by thread, the assembly will be flush in all cases
- Presence of air flow regulation? Yes, but fixed only
- Diameter in mms maximum of the air regulation possible: 8
- Minimum diameter in mms of the air regulation possible: 0.1
- Positioning of the air regulation: Positioning of the air regulation adjustable effectively
- Atomization chamber type: Bell type
- Heat dissipation of the product: Normal
Reviewer's comments on functional features
The Alleria is an RTA or RDTA atomizer, a clear tank dripper.
It is equipped with a very easy to assemble Velocity deck. I installed a double Clapton coil 3mm in diameter, there is room and even if by mistake, your resistance touches the bell, no risk of short-circuit. Another advantage with the pyrex bell, we always have an eye on its assembly, which allows to detect any problem.
You can adjust the air and juice arrivals. For the airflow, I am not drawing you, we turn the ring taking care not to ravage the fingers with the grip.
For the juice adjustment, Augvape has developed a system that allows the bell to be raised or lowered by rotating the drip-tip. It's simple, efficient and, of course, the juice inlet will be completely closed to proceed with the filling from the top. Thus, we will avoid putting our hands full of it and elsewhere.
The other advantage of all pyrex is the good heat dissipation, I have the impression that it heats less than its little comrades.
Finally, the copper pin is adjustable which will make it easier to obtain our dear “flush attitude”.
Drip-Tip Features
- Drip tip type: 510 Only
- Presence of a Drip-Tip? Yes, the vaper can immediately use the product
- Length and type of drip-tip present: Short
- Quality of the drip-tip present: Very good
Reviewer's comments on the Drip-Tip
The drip-tip is an essential part for the implementation of the juice arrival adjustment. Indeed, at its base, two small pins fit into two notches on the top of the fireplace. So the rotation of the latter drives the chimney, we turn clockwise to close and vice versa to open.
The atomizer is equipped with an 510 port, which allows you to use one of your drip-tips, but you will still need to keep the original drip-tip handy to manage the flow of juice. At the same time, it is well suited to the ato vape and I find it rather well done. In bi-material it will avoid burning itself.
Evaluation of the packaging
- Presence of a box accompanying the product: Yes
- Would you say that the packaging is up to the price of the product? Yes
- Presence of a user manual? Yes
- Is the manual understandable for a non-English speaker? No
- Does the manual explain ALL features? Yes
Vapelier's note on packaging: 4 / 5 
Reviewer's comments on conditioning
It is our traditional transparent hard plastic box that serves as the backdrop for this Alleria.
Considering the price, it's okay. The pack is complete, spare tank, spare bell, Allen keys, screws and gaskets, everything is there. There is a manual in English, a little succinct, but which shows the main subtleties of the atomizer with the help of photos.
Appreciations in use
- Transport facilities with mod of test configuration: Ok for an inside jacket pocket (no deformations)
- Disassembly and cleaning facilities: Easy but requires a workspace
- Filling facilities: Easy, even standing in the street
- Easy to change resistors: Easy but requires a workspace to lose nothing
- Is it possible to use this product throughout the day with several vials of EJuice? Yes perfectly
- Was there leak after one day of use? No
- In the event of leaks during the tests, descriptions of the situations in which they occur:
Vapelier's note on ease of use: 4 / 5
Reviewer's comments on the use of the product
The assembly is easy but I already said it. Easy filling and that too, I already said.
Our atomizer is a big consumer of juice, these 3 ml will not take you far.
Without being hyper-compact, it remains in a certain standard. Coupled with a reasonably sized mod, your set-up will remain portable.
No real leak, but pay attention to the cotton dosage, as with many atomizers of this type, the error inevitably results in a leak.
The vape it offers is tasty and very vaporous, a real good RTA as we like them.
Recommendations for use
- With which type of mod is it advisable to use this product? Electronics AND Mechanics
- With which mod model is it advisable to use this product? What you like, as long as it is compatible with a 23mm diameter atomizer
- With which type of EJuice is it advisable to use this product? All liquids without problem
- Description of the test configuration used: Double Clapton coil.to.0,40ohm Fiber Freaks density 2
- Description of the ideal configuration with this product: I like mine
was the product liked by the reviewer: Yes
Overall average of the Vapelier for this product: 4.3 / 5 
Link to a video review or blog maintained by the reviewer author of the review
The mood ticket of the reviewer
Another atomizer in this new large family which continues to grow: the RDTAs.
If it uses the codes established by its predecessors, it brings its touch of originality with its pyrex bell. The vape remains quite similar to that of a dripper, so we have a good restitution of flavor and a large production of vapor.
Intended for vapers who like direct inhalation, I do not recommend it for beginners in the vape. On the other hand, a vapoteur having a few hours of “flight” and wishing to embark on the reconstructible will find an accessible product there.
Not free from faults, however, we cannot blame it for much, since it displays a price close to that of certain clearomizers.
A good product to report quality / price / vape very interesting.
Good vape
Vince
(c) Copyright Le Vapelier SAS 2014 - Only full reproduction of this article is authorized - Any modification of any kind is totally prohibited and infringes the rights of this copyright.
