Header
Header
IN SHORT:
Aga-t4 by Youde
Aga-t4 by Youde

Aga-t4 by Youde

Commercial characteristics

  • Sponsor having loaned the product for the magazine: The world of the vape, http://www.lemondedelavape.fr
  • Price of the tested product: 25.90 Euros
  • Product category according to its selling price: Entry level (from 1 to 35 euros)
  • Atomizer type: Classic rebuildable
  • Number of resistances allowed: 2
  • Resistor Type: Rebuildable Micro coil, Genesys Reconstructible
  • Type of wicks supported: Silica, Cotton, Ekowool, Metal Mesh, Steel Cable
  • Quantity in milliliters announced by the manufacturer: 3

Reviewer comments on business characteristics

Atomizer type genesis, positioned as a first prize but does not overlook the features.

Physical characteristics and felt quality

  • Width or Diameter of the product in mms: 22
  • Length or height of the product in mms as it is sold, but without its drip tip if it is present, and regardless of the length of the connection: 45.5
  • Weight in grams of the product as sold, with its drip tip if it is present: 64
  • Material composing the product: Stainless Steel, Brass, Pyrex, Stanless Steel grade 304
  • Form Factor Type: Kraken
  • Number of component parts without screws and washers: 5
  • Number of threads: 3
  • Quality of the threads: Very good
  • Number of O-rings, Dript-Tip excluded: 3
  • Quality of O-rings present: Good
  • O-ring positions: Top Cap - Tank, Bottom Cap - Tank, Other
  • Capacity in milliliters actually usable: 2.8
  • Overall, do you appreciate the quality of manufacture of this product with regard to its price? Yes

Rating of the vapelier as to feelings quality: 4.8 / 5 4.8 5 out of stars

Reviewer's comments on physical characteristics and perceived quality

Beautiful achievement on this ato sold yet cheap. Assemblies are well thought out.
The quality of the screw is very good and the pyrex tank isolated in a bell is of great thickness.

Functional features

  • Connection type: 510
  • Adjustable positive plot? Yes, through a thread adjustment, the assembly will flush in all cases
  • Presence of a regulation of the flow of air? Yes, but only fixed
  • Diameter in mms maximum of the air regulation possible: 2
  • Minimum diameter in mms of the air regulation possible: 2
  • Air regulation positioning: Lateral positioning and benefiting resistors
  • Spray chamber type: bell type
  • Heat dissipation of the product: Normal

Reviewer's comments on functional features

The atomizer is completely removable, which allows to completely remove the work plate (or deck) and thus facilitate the establishment of your resistance.

Drip-Tip Features

  • Drip tip type: 510 Only
  • Presence of a Drip-Tip? No, the vapoteur will have to buy a compatible drip-tip, in order to be able to use the product
  • Length and type of drip-tip present: No drip tip present
  • Quality of the present drip-tip: No present drip tip

Reviewer's comments on the Drip-Tip

No drip tip present in the package

Evaluation of the packaging

  • Presence of a box accompanying the product: Yes
  • Would you say that the packaging is up to the price of the product? Yes
  • Presence of a user manual? Yes
  • Is the manual understandable for a non-English speaker? Yes
  • Does the manual explain ALL features? No

Vapelier's note on packaging: 4 / 5 4 5 out of stars

Reviewer's comments on conditioning

Very complete packaging for a product in this price range, we are entitled to a small bag of spare containing different joints, a piece of fine mesh as well as a piece of resistive for the first montages as well as silicone plug to condemn a mesh hole for use of the ato in single coil.

Appreciations in use

  • Transport facilities with the mod of the test configuration: Ok for a side pocket of Jean (no discomfort)
  • Disassembly and cleaning facilities: Easy but requires a workspace
  • Filling facilities: Easy, even standing in the street
  • Easy to change resistors: Easy but requires a workspace to lose nothing
  • Is it possible to use this product throughout the day with several vials of EJuice? Yes perfectly
  • Was there leak after one day of use? No
  • In the event of leaks during tests, descriptions of the situations in which they occurred

Note from Vapelier on the ease of use: 4 / 5 4 5 out of stars

Reviewer's comments on the use of the product

Like all ato genesis, you will need some tools and time to mount your first resistance but once they do your editing can take several days without intervention on your part. For filling during the day a simple Phillips screwdriver (still must have it on you) will allow you to remove the filling screw.

Recommendations for use

  • With which type of mod is it advisable to use this product? Electronics AND Mechanics
  • With which mod model is it advisable to use this product? Mod mechanic or electro depending on your resistance and preference of vape
  • With which type of EJuice is it advisable to use this product? All liquids without problem
  • Description of the test configuration used: Mod meca on a mc cotton mount at 0.8ohm and 400hm genesis mount (mesh 0.5)
  • Description of the ideal configuration with this product: Mod mechanic and low resistance

was the product liked by the reviewer: Yes

Overall average of the Vapelier for this product: 4.6 / 5 4.6 5 out of stars

Link to a video review or blog maintained by the reviewer author of the review

The mood ticket of the reviewer

That she nice surprise that this aga-t4, it arrives in a complete package that some high-end do not have (kraken for example) and rivals even with them on the rendering taste, just that !!
For aficionados of cotton mc no worries, its tray is completely removable which greatly facilitates the passage of cotton in the holes provided for this purpose. Holes of a wide diameter (3.5mm) which will allow "breathing" your assembly. Finished the dry hit because of a tank in pressure, the air will circulate freely there which will benefit your locks that they are of cotton of cable and other stainless mesh.

Now let's talk about the top cap, it has a fault for me, it is screwed to the plateau. While this makes your editing less "wobbly" but also makes it less convenient disassembly to remove the excess of inevitable condensation on an ato genesis. Good point however, the interior is dome-shaped, which has the effect of improving the rendering of the ato.

Another interesting point, its airflow. No more ugly holes on the perimeter of the top cap. Indeed the air inlets are positioned on the bottom of the liquid tank to go up along the central tube to finish on large openings stack in front of your assembly. Your resistance will not miss air (puns ... laughs!).

In conclusion, a very affordable ato (less than 30 €) able to compete with the most expensive, congratulations Youde !! and thank you Carlos our sponsor !!

(c) Copyright Vapelier SAS 2014 - Only the complete reproduction of this article is authorized - Any modification of any nature whatsoever is totally prohibited and violates the rights of this copyright.

Print Friendly, PDF & Email
Com Inside Bottom
Com Inside Bottom
Com Inside Bottom
Com Inside Bottom

About the Author