Commercial characteristics
- Sponsor having loaned the product for the magazine: The Little Vapoteur
- Price of the tested product: 32.9 Euros
- Product category according to its selling price: Entry level (from 1 to 35 euros)
- Atomizer type: Reconstructable with tank
- Number of resistances allowed: 2
- Resistance Type: Classic Reconstructible, Rebuildable Micro Coil, Reconstructible Classic Temperature Controlled, Rebuildable Micro Coil with Temperature Control
- Supported Bit Type: Cotton, Fiber Freaks Density 1, Fiber Freaks Density 2, Fiber Freaks Yarn 2 mms, Fiber Freaks Cotton Blend
- Quantity in milliliters announced by the manufacturer: 3
Reviewer comments on business characteristics
The Alleria is a reconstructable atomizer with an obvious particularity, its "bell" which constitutes the atomization chamber is entirely in Pyrex. So the assembly is visible when you are vaping and clearly displayed for all to see. Its diameter is 23mm.
The tray has two studs on each of which there are two holes to perform a double coil without difficulty with a wide spacing. The adjustable airflow is wide and easy filling.
Its appearance reminds me a lot of the Cubis and it does not displease me, on the contrary, since the tank is partly protected.
The Alleria has another particularity: it is able to dose the flow of liquid via its drip-tip.
Physical characteristics and felt quality
- Width or Diameter of the product in mms: 23
- Length or height of the product in mms as it is sold, but without its drip tip if it is present, and regardless of the length of the connection: 50
- Weight in grams of the product as sold, with its drip tip if it is present: 70
- Material composing the product: Stainless steel, Pyrex
- Form Factor Type: Kayfun / Russian
- Number of component parts without screws and washers: 7
- Number of threads: 4
- Quality of the threads: Very good
- Number of O-rings, Drip-Tip excluded: 6
- Quality of O-rings present: Very good
- O-ring positions: Drip-Tip Connection, Top Cap - Tank, Bottom Cap - Tank, Other
- Capacity in milliliters actually usable: 3
- Overall, do you appreciate the quality of manufacture of this product with regard to its price? Yes
Rating of the vapelier as to feelings quality: 5 / 5 
Reviewer's comments on physical characteristics and perceived quality
The overall quality of the Alleria is really correct with a good quantity of material and especially the tank in two parts, whose stainless steel part reduces the risk of breakage of the pyrex because it is very exposed to shocks.
Regarding the threads, no problem, there is a good grip on each of them and the gaskets used are of good quality, of a correct thickness, which ensures the desired seal.
The diameter is 23mm and the ato is barely a little heavier than an atomizer of this type with a large pyrex tank, but still remains in the standard.
What is not common, however, is the bell that covers the assembly on the board. It is in Pyrex, while its fireplace remains in aluminum. It's a nice idea that will appeal to “builders”, since the assembly is visible on the plate, which has two studs for four holes, in order to achieve a double resistance easily.
Under the base we can read, laser engraved, perfectly clear, the inscription of the name of the ato and that of the designer, as well as the serial number of the atomizer.
The pine is made of copper and can easily be adjusted with a small flat screwdriver.
Functional features
- Connection type: 510
- Adjustable positive stud? Yes, through an adjustment by thread, the assembly will be flush in all cases
- Presence of air flow regulation? Yes, and variable
- Diameter in mms maximum of the air regulation possible: 8
- Minimum diameter in mms of the air regulation possible: 0.1
- Positioning of the air regulation: Positioning of the air regulation adjustable effectively
- Atomization chamber type: Bell type
- Heat dissipation of the product: Excellent
Reviewer's comments on functional features
Let us detail the various functions of this atomizer which allows, above all, the simplicity of execution of the assemblies, with its two studs with double drilling. An apparent assembly at any time, with its Pyrex bell which also has the advantage of not risking a short circuit when the resistors are too far apart and they touch the bell, the hot spots are immediately visible with this Alleria.
Its adjustable pin is made of copper, thus offering very good conductivity. The airflow is also adjustable by the rotating ring located on its base. The flow of liquid is done according to its viscosity, by the rotation of the proprietary drip-tip which completely opens the flow of juice, by manipulating the ring to the right, and closes it by turning to the left, moreover the movement of the pyrex bell is perfectly visible. Finally, the filling by the top cap is childish.
Another characteristic is its capacity to dissipate heat, which allows you to make sub-ohm assemblies to produce a large quantity of vapor, associated with the regulation of the air flow, rather efficient.
Drip-Tip Features
- Type of drip-tip attachment: Owner but passage to 510 through a supplied adapter
- Presence of a Drip-Tip? Yes, the vaper can immediately use the product
- Length and type of drip-tip present: Short
- Quality of the drip-tip present: Very good
Reviewer's comments on the Drip-Tip
The drip-tip is proprietary and has two lugs on its base which fit into the top-cap to allow control of the thread located on the chimney. By rotating this drip-tip, this has the effect of lowering the bell, the base of which is pressed against the plate, effectively stopping the flow of liquid, or on the contrary, raising it to open the arrival of juice.
The system is quite fun and practical, however be careful not to lose this drip-tip, otherwise the flow will no longer be adjustable.
The connection of the drip-tip is still in 510 and allows to exchange it with a model of your choice when the setting will be effective, however, it will still be useful when you refuel your tank because it is imperative to cut the arrival of juice for that.
Aesthetically, it is quite short, dark and simple. Its base is in stainless steel, while the part touching the lips is in Delrin, black in color, helps to reduce the feeling of heat.
Evaluation of the packaging
- Presence of a box accompanying the product: Yes
- Would you say that the packaging is up to the price of the product? Yes
- Presence of a user manual? Yes
- Is the manual understandable for a non-English speaker? Yes
- Does the manual explain ALL features? Yes
Vapelier's note on packaging: 5 / 5
Reviewer's comments on conditioning
It is a good conditioning that offers us Augvape, in a transparent plastic box we find inside a protective foam in which lodge:
- The atomizer
- A replacement pyrex tank
- A spare pyrex bell
- Additional gaskets and screws
- An Allen key
- And instructions for use.
Although the user manual is not in French, there are so few words to understand that the many photos attached, are enough to explain how the ato works.
A correct and complete packaging for this product, which is not upscale.
Appreciations in use
- Transport facilities with mod of test configuration: Ok for an inside jacket pocket (no deformations)
- Disassembly and cleaning facilities: Easy, even standing in the street, with a simple tissue paper
- Filling facilities: Super simple, even blind in the dark!
- Easy to change resistors: Easy but requires a workspace to lose nothing
- Is it possible to use this product throughout the day with several vials of EJuice? Yes perfectly
- Was there leak after one day of use? No
- In the event of leaks during the tests, descriptions of the situations in which they occur:
Vapelier's note on ease of use: 4.4 / 5 
Reviewer's comments on the use of the product
It is a product that suits all vapers, experienced or not. Its double coil assembly is simple to achieve with an individual fixation for each leg. The place is wide to work at your ease.
The airflow is sufficient for a very airy vape and can also be reduced to a minimum for fluid liquids with high resistance, associated with a juice flow, which is also adjustable via the drip tip.
When filling, do not forget to close the flow of liquid by rotating the drip tip to the left, so that the bell completely isolates the combustion chamber. A defect of this preliminary operation, implies the risk that the juice comes flooding the plate, and escapes by the airholes. The liquid inlet will then be opened for normal use.
Access to the assembly and also accessible when the tank is full. In short, nothing very complicated.
Side vape, this atomizer can accept assemblies with very different resistive values, it works as well with 1.5Ω as with 0.25Ω with a dissipation of the perfectly controlled heat. By raising the power you will get beautiful dense clouds, but the flavors meanwhile, will be moderately restored.
During use, I did not notice any leaks or dry hits, or almost, because the Alleria reaches its limits on a double coil of 0.25Ω at more than 45W, the flow of liquid is no longer sufficient, even large open.
At 30W and a double coil of 0.5Ω, the flow wide open, it works ideally, however, bring an additional vial of liquid with you, because it is a large consumer which contains only 3ml. In addition, I advise you not to make strands too long so as not to restrict the flow of the liquid. It will be more judicious to leave the wicks flush with the plate.
It is an excellent product whose quality / price ratio makes it a top notch.
Recommendations for use
- With which type of mod is it advisable to use this product? Electronics AND Mechanics
- What mod model is it recommended to use this product with? mechanical mod or electro mod
- With which type of EJuice is it advisable to use this product? All liquids without problem
- Description of the test configuration used: 0.5Ω to 30W
- Description of the ideal configuration with this product: a resistance of 0.8Ω, for a lower consumption
was the product liked by the reviewer: Yes
Overall average of the Vapelier for this product: 4.8 / 5 
Link to a video review or blog maintained by the reviewer author of the review
The mood ticket of the reviewer
This is a beautiful product that will appeal to many vapers. Because of its price quite affordable, its ease of use, even in double coil, and especially by the pyrex bell which reveals the assembly that some builders like to see.
Variable air and liquid flow, easy top filling and easy access to assembly without emptying your tank ... it's hard to find a significant fault with this Alleria, except that the flavors are correct without being admirable, it still provides a dense vape. Another point that saddens me is its 23mm diameter, which does not match, for lovers of the 22mm mecha.
All in a perfect packaging with a pleasant aesthetic. Superb!
Sylvie.I
(c) Copyright Le Vapelier SAS 2014 - Only full reproduction of this article is authorized - Any modification of any kind is totally prohibited and infringes the rights of this copyright.
